I've apparently got multipath configured 'correctly', however it seems to
favor one path over the other. I can tell this by watching the switch
traffic... traffic only flows down one path. When I take the 'non-prefered'
path offline the logs notice, and take down the path. I can bring that path
back online and the path reconnects.
However, when I take the 'preferred' path offline, the volume shows
Input/Output errors, and forces the volume into read-only mode.
Background:
Running v0.4.9 of device-mapper-multipath
Hitachi AMS2500 array, using ports 0F and 1F
Brocade 5300 switches, split into two fabrics. (fabric A, port 30,
fabric B port 30)
Host has a qlogic 2462 card with two ports in use.
Current multipath.conf:
blacklist {
devnode "^sda$"
}
defaults {
checker_timeout 5
polling_interval 5
}
multipaths {
multipath {
wwid 360060e8010053b90052fb06900000190
alias vrp
# path_selector "round-robin 0"
}
}
devices {
device {
vendor "HITACHI"
product "DF.*"
getuid_callout "/sbin/scsi_id -g -u -s /block/%n"
features "1 queue_if_no_path"
hardware_handler "0"
path_selector "round-robin 0"
# path_grouping_policy group_by_prio
path_grouping_policy multipath
# Hitachi recommendation.
failback immediate
rr_weight uniform
rr_min_io 1000
path_checker tur
prio hds
}
}
results of 'multipath -ll'
# multipath -ll
vrp (360060e8010053b90052fb06900000190) dm-8 HITACHI,DF600F
size=70G features='1 queue_if_no_path' hwhandler='0' wp=rw
|-+- policy='round-robin 0' prio=1 status=enabled
| `- 6:0:0:0 sdc 8:32 active ready running
`-+- policy='round-robin 0' prio=0 status=enabled
`- 5:0:0:0 sdb 8:16 active ready running
I've also worked with several revisions of the multipath.conf file. If I
remember correctly, with some device stanza revisions, I've had multipath -ll
returning this result instead:
# multipath -ll
vrp (360060e8010053b90052fb06900000190) dm-8 HITACHI,DF600F
size=70G features='0' hwhandler='0' wp=rw
`-+- policy='round-robin 0' prio=1 status=active
|- 6:0:0:0 sdc 8:32 active ready running
`- 5:0:0:0 sdb 8:16 active ready running
However, both are affected by the same problem.
Here's what multipath -ll shows in a path failure:
[root@prtdb02 ~]# multipath -ll
May 26 18:50:12 | sdc: hds prio: SCSI error
vrp (360060e8010053b90052fb06900000190) dm-8 HITACHI,DF600F
size=70G features='1 queue_if_no_path' hwhandler='0' wp=rw
|-+- policy='round-robin 0' prio=0 status=active
| `- 6:0:0:0 sdc 8:32 failed faulty running
`-+- policy='round-robin 0' prio=0 status=enabled
`- 5:0:0:0 sdb 8:16 active ready running
Excerpt from /etc/fstab:
LABEL=vrp-db /vrp-db ext3 defaults 0 2
relevant line from pvscan:
PV /dev/mpath/vrp VG vrpdg lvm2 [70.00 GB / 0 free]
relevant line from vgscan:
Found volume group "vrpdg" using metadata type lvm2
While I'd prefer an 'active-active' setup, I'd accept an active/passive
setup, provided it failed over correctly... preferably with a fast failback.
I'm more than happy to provide any other information.
--Jason
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
