On 03/30/2011 01:09 AM, Shyam_Iyer@xxxxxxxx wrote:
Let me back up here.. this has to be thought in not only the traditional Ethernet
> sense but also in a Data Centre Bridged environment. I shouldn't
have wandered
> into the multipath constructs..
I think the statement on not going to the same LUN was a little erroneous. I meant
> different /dev/sdXs.. and hence different block I/O queues.
Each I/O queue could be thought of as a bandwidth queue class being serviced through
> a corresponding network adapter's queue(assuming a multiqueue
capable adapter)
Let us say /dev/sda(Through eth0) and /dev/sdb(eth1) are a cgroup bandwidth group
> corresponding to a weightage of 20% of the I/O bandwidth the user
has configured
> this weight thinking that this will correspond to say 200Mb of
bandwidth.
Let us say the network bandwidth on the corresponding network queues corresponding
> was reduced by the DCB capable switch...
We still need an SLA of 200Mb of I/O bandwidth but the underlying dynamics have changed.
In such a scenario the option is to move I/O to a different bandwidth priority queue
> in the network adapter. This could be moving I/O to a new network
queue in eth0 or
> another queue in eth1 ..
This requires mapping the block queue to the new network queue.
One way of solving this is what is getting into the open-iscsi world i.e. creating
> a session tagged to the relevant DCB priority and thus the
session gets mapped
> to the relevant tc queue which ultimately maps to one of the
network adapters multiqueue..
But when multipath fails over to the different session path then the DCB bandwidth
> priority will not move with it..
Ok one could argue that is a user mistake to have configured bandwidth priorities
> differently but it may so happen that the bandwidth priority was
just dynamically
> changed by the switch for the particular queue.
Although I gave an example of a DCB environment but we could definitely look at
> doing a 1:n map of block queues to network adapter queues for
non-DCB environments too..
That sounds quite convoluted enough to warrant it's own slot :-)
No, seriously. I think it would be good to have a separate slot
discussing DCB (be it FCoE or iSCSI) and cgroups.
And how to best align these things.
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
hare@xxxxxxx +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Markus Rex, HRB 16746 (AG Nürnberg)
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
