Hi, since 2.6.33 the ext4 file system supports emitting DISCARD/TRIM/... commands that notify the disk about deleted blocks that may be reused by the disk for whatever it wants. This is especially helpful for SSDs to reduce performance degradation due to internal fragmentation ... What are the plans / is the status for adding DISCARD support to the device mapper? Especially for RAID-0/RAID-1 configurations with multiple SSDs this will be really helpful. The DISCARD requests received from the file system layer just need to be translated/duplicated to the sector ranges on the physical disks and than the appropriate commands for the disks need to be generated. If there is anything to be tested, I'm willing to help. I have a machine with 4 SuperTalent FTM56GX25H SSDs (firmware 1916) that happily do TRIM if they are used as single disks, but not in a 1TB RAID-0 configuration managed via LVM. Experiments have shown significant performance improvements (factor 4-5) for some heavy I/O loads on single SSD (250 GB) using DISCARD, I'd like to achieve them for a larger data set (1 TB), too. Andreas -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
