Hello Vijay,
On 10/22/2010 10:35 AM, Chauhan, Vijay wrote:
On Thur, October 21, 2010 8:22 PM, Rudy Gevaert wrote:
On 10/21/2010 09:28 AM, Chauhan, Vijay wrote:
Try with disabling the queuing before removing the map.
dmsetup message mail14r-ds3400-1 0 "fail_if_no_path"
Hi
When I do that, and then unmap the lun.
If I then rescan an issue multipath I get:
root@cyrprd1:~# multipath
create: 1 undef IBM,1726-4xx FAStT
size=550G features='1 queue_if_no_path' hwhandler='1 rdac' wp=undef
`-+- policy='round-robin 0' prio=0 status=undef
|- 0:0:0:3 sdd 8:48 undef faulty running
`- 5:0:0:3 sdl 8:176 undef faulty running
<hang>
You may not get into this issue if you follow these steps:
step 1) Delete the paths for the dm device to be unmapped. (Ensure that this dm device is not being used for IO)
Once the last path is deleted, multipathd will remove this map.
step 2) Unmap the LUN from storage.
Hope this helps.
Regards,
Vijay
Unfortunately I then get up with:
root@cyrprd3:~# multipath -l
1 dm-3 IBM,1726-4xx FAStT
size=550G features='1 queue_if_no_path' hwhandler='1 rdac' wp=rw
`-+- policy='round-robin 0' prio=-30 status=enabled
|- 5:0:0:10 sdb 8:16 failed undef running
|- 6:0:0:10 sdc 8:32 failed undef running
|- 5:0:0:12 sdd 8:48 failed undef running
|- 6:0:0:12 sde 8:64 failed undef running
|- 5:0:0:20 sdf 8:80 failed undef running
|- 6:0:0:20 sdg 8:96 failed undef running
|- 5:0:0:9 sdh 8:112 failed undef running
|- 6:0:0:9 sdi 8:128 failed undef running
|- 5:0:0:11 sdj 8:144 failed undef running
|- 6:0:0:11 sdk 8:160 failed undef running
|- 5:0:0:13 sdl 8:176 failed undef running
|- 6:0:0:13 sdm 8:192 failed undef running
|- 5:0:0:8 sdn 8:208 failed undef running
|- 6:0:0:8 sdo 8:224 failed undef running
|- 5:0:0:21 sdp 8:240 failed undef running
|- 6:0:0:21 sdq 65:0 failed undef running
|- 5:0:0:19 sdr 65:16 failed undef running
|- 6:0:0:19 sds 65:32 failed undef running
|- 5:0:0:18 sdt 65:48 failed undef running
|- 6:0:0:18 sdu 65:64 failed undef running
|- 5:0:0:17 sdv 65:80 failed undef running
|- 6:0:0:17 sdw 65:96 failed undef running
|- 5:0:0:22 sdx 65:112 failed undef running
|- 6:0:0:22 sdy 65:128 failed undef running
|- 5:0:0:16 sdz 65:144 failed undef running
|- 6:0:0:16 sdaa 65:160 failed undef running
|- 5:0:0:15 sdab 65:176 failed undef running
|- 6:0:0:15 sdac 65:192 failed undef running
|- 5:0:0:14 sdad 65:208 failed undef running
`- #:#:#:# - #:# failed undef running
(for the last line, I also echo'd 1 to the remove file. Doing for all
devices gets me:
1 dm-3 ,
size=550G features='1 queue_if_no_path' hwhandler='1 rdac' wp=rw
`-+- policy='round-robin 0' prio=-30 status=active
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# active undef running
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# failed undef running
|- #:#:#:# - #:# failed undef running
`- #:#:#:# - #:# failed undef running
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
