On 08/23/2010 12:45 PM, Sergey Vlasov wrote:
On Mon, Aug 23, 2010 at 11:19:13AM -0400, Ric Wheeler wrote:
[...]
(2) hardware raid cards with internal buffer memory and on-card battery backup
(they sit in your server, disks sit in jbod like expansion shelves). These are
fine if the drives in those shelves have write cache disabled.
Actually some of such cards keep write cache on the drives enabled and
issue FLUSH CACHE commands to the drives. E.g., 3ware 9690SA behaves
like this at least with SATA drives (the FLUSH CACHE commands can be
seen after enabling performance monitoring - they often end up in the
"10 commands having the largest latency" table). This can actually be
safe if the card waits for the FLUSH CACHE completion before making
the write cache data in its battery-backed memory available for reuse
(and the drive implements the FLUSH CACHE command correctly).
Yes - this is certainly one way to do it. Note that this will not work if the
card advertises itself as a write through cache (and we end up not sending down
the SYNC_CACHE commands).
At least one hardware RAID card (I unfortunately cannot mention the brand) did
not do this command forwarding.
ric
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
