Hi all, does anybody ahev seen this issue: When adding new disks in an envrionment with device mapper mulitpathing configured properly, new disks do show up and multipath -ll does show the correct priority groups. Along with all the new DM devices created in - /dev/disk/by-id - /dev/disk/by-name - /dev/disk/by-uuid - /dev/mapper we do expect to get entries like /dev/dm-[0-9][0-9]* - but this does not happen. Unfortunately some NetApp provisioning software needs these entries. Any ideas? The system(s) are SLES10 SP2 (no additional patches applied yet) Kind regards Georg _______________________________________________________________________________________ Georg Mey Solutions Architect NetApp Wankelstrasse 3 D-70563 Stuttgart +49 (0) 711-686880-65 Tel +49 (0) 711-686880-99 Fax +49 (0) 151-12055-928 Mobil Georg.Mey@xxxxxxxxxx www.netapp.de Diese e-Mail kann vertrauliche und/oder rechtlich geschützte Informationen enthalten. Wenn Sie nicht der richtige Adressat sind oder diese e-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese e-Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser e-Mail und ihrer Inhalte ist nicht gestattet. This e-mail may contain confidential and/or privileged information. If you are not the intended addressee or have received this e-mail in error, please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden. NetApp Deutschland GmbH, Bretonischer Ring 6, 85630 Grasbrunn, Handelsregister: AG München HRB113907, Geschäftsführer: Manfred Reitner -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
