Thanks Babu, It matches with what I was seeing too. On Thu, 2009-10-01 at 18:03 -0600, Moger, Babu wrote: > Hi Chandra, > I have tested these patches on 2.6.31 kernel with LSI storage. > My configuration had 234 Luns with two paths to each lun(one active, one passive) and luns were evenly distributed. > Here are the results. > > Results with the patches > Failover takes about 1 minute to complete 117 mode selects. Failovers are completed in two sets(1 mode select first and then 116 mode selects together). > Failback takes about 2 and Half minutes.. > > > Results without the patches on same configuration > failover takes about 12 minutes to complete 117 mode selects. > Failback takes about 15 minutes. > > Thanks > Babu Moger > > > -----Original Message----- > > From: linux-scsi-owner@xxxxxxxxxxxxxxx [mailto:linux-scsi- > > owner@xxxxxxxxxxxxxxx] On Behalf Of Chandra Seetharaman > > Sent: Tuesday, September 29, 2009 9:08 PM > > To: linux-scsi@xxxxxxxxxxxxxxx > > Cc: dm-devel@xxxxxxxxxx; Moger, Babu; michaelc@xxxxxxxxxxx; > > Benoit_Arthur@xxxxxxx; Eddie.Williams@xxxxxxxxxxxx; > > berthiaume_wayne@xxxxxxx; Chandra Seetharaman > > Subject: [PATCH 2/4] scsi_dh: rdac handler: Make rdac hardware handler > > async > > > > Batch up MODE_SELECT in rdac device handler. > > > > LSI RDAC storage has the capability of handling mode selects for > > multiple luns in a same command. Make use of that ability to send > > as few MODE SELECTs as possible to the storage controller as possible. > > > > This patch creates a work queue and queues up activate requests > > when a MODE SELECT is sent down the wire. When that MODE SELECT > > completes, it compiles queued up activate requests for multiple > > luns into a single MODE SELECT. > > > > This reduces the time to do failover/failback of large number of LUNS. > > > > Signed-off-by: Babu Moger <babu.moger@xxxxxxx> > > Signed-off-by: Chandra Seetharaman <sekharan@xxxxxxxxxx> > > > > --- > > drivers/scsi/device_handler/scsi_dh_rdac.c | 117 > > ++++++++++++++++++++++++++--- > > 1 file changed, 104 insertions(+), 13 deletions(-) > > > > Index: linux-2.6.31/drivers/scsi/device_handler/scsi_dh_rdac.c > > =================================================================== > > --- linux-2.6.31.orig/drivers/scsi/device_handler/scsi_dh_rdac.c > > +++ linux-2.6.31/drivers/scsi/device_handler/scsi_dh_rdac.c > > @@ -22,6 +22,7 @@ > > #include <scsi/scsi.h> > > #include <scsi/scsi_eh.h> > > #include <scsi/scsi_dh.h> > > +#include <linux/workqueue.h> > > > > #define RDAC_NAME "rdac" > > #define RDAC_RETRY_COUNT 5 > > @@ -135,6 +136,11 @@ struct rdac_controller { > > struct rdac_pg_legacy legacy; > > struct rdac_pg_expanded expanded; > > } mode_select; > > + spinlock_t ms_lock; > > + int ms_queued; > > + struct work_struct ms_work; > > + struct scsi_device *ms_sdev; > > + struct list_head ms_head; > > }; > > struct c8_inquiry { > > u8 peripheral_info; > > @@ -195,8 +201,17 @@ static const char *lun_state[] = > > "owned (AVT mode)", > > }; > > > > +struct rdac_queue_data { > > + struct list_head entry; > > + struct rdac_dh_data *h; > > + activate_complete callback_fn; > > + void *callback_data; > > +}; > > + > > static LIST_HEAD(ctlr_list); > > static DEFINE_SPINLOCK(list_lock); > > +static struct workqueue_struct *kmpath_rdacd; > > +static void send_mode_select(struct work_struct *work); > > > > static inline struct rdac_dh_data *get_rdac_data(struct scsi_device > > *sdev) > > { > > @@ -253,7 +268,6 @@ static struct request *rdac_failover_get > > rdac_pg->subpage_code = 0x1; > > rdac_pg->page_len[0] = 0x01; > > rdac_pg->page_len[1] = 0x28; > > - rdac_pg->lun_table[h->lun] = 0x81; > > } else { > > struct rdac_pg_legacy *rdac_pg; > > > > @@ -263,7 +277,6 @@ static struct request *rdac_failover_get > > common = &rdac_pg->common; > > rdac_pg->page_code = RDAC_PAGE_CODE_REDUNDANT_CONTROLLER; > > rdac_pg->page_len = 0x68; > > - rdac_pg->lun_table[h->lun] = 0x81; > > } > > common->rdac_mode[1] = RDAC_MODE_TRANSFER_SPECIFIED_LUNS; > > common->quiescence_timeout = RDAC_QUIESCENCE_TIME; > > @@ -297,6 +310,7 @@ static void release_controller(struct kr > > struct rdac_controller *ctlr; > > ctlr = container_of(kref, struct rdac_controller, kref); > > > > + flush_workqueue(kmpath_rdacd); > > spin_lock(&list_lock); > > list_del(&ctlr->node); > > spin_unlock(&list_lock); > > @@ -326,6 +340,11 @@ static struct rdac_controller *get_contr > > memcpy(ctlr->slot_id, slot_id, SLOT_ID_LEN); > > kref_init(&ctlr->kref); > > ctlr->use_ms10 = -1; > > + ctlr->ms_queued = 0; > > + ctlr->ms_sdev = NULL; > > + spin_lock_init(&ctlr->ms_lock); > > + INIT_WORK(&ctlr->ms_work, send_mode_select); > > + INIT_LIST_HEAD(&ctlr->ms_head); > > list_add(&ctlr->node, &ctlr_list); > > done: > > spin_unlock(&list_lock); > > @@ -445,8 +464,7 @@ static int set_mode_select(struct scsi_d > > return err; > > } > > > > -static int mode_select_handle_sense(struct scsi_device *sdev, > > - unsigned char *sensebuf) > > +static int mode_select_handle_sense(unsigned char *sensebuf) > > { > > struct scsi_sense_hdr sense_hdr; > > int err = SCSI_DH_IO, ret; > > @@ -478,7 +496,7 @@ static int mode_select_handle_sense(stru > > err = SCSI_DH_RETRY; > > break; > > default: > > - sdev_printk(KERN_INFO, sdev, > > + printk(KERN_INFO > > "MODE_SELECT failed with sense > > %02x/%02x/%02x.\n", > > sense_hdr.sense_key, sense_hdr.asc, > > sense_hdr.ascq); > > } > > @@ -487,11 +505,29 @@ done: > > return err; > > } > > > > -static int send_mode_select(struct scsi_device *sdev, struct > > rdac_dh_data *h) > > +static void send_mode_select(struct work_struct *work) > > { > > + struct rdac_controller *ctlr = > > + container_of(work, struct rdac_controller, ms_work); > > struct request *rq; > > + struct scsi_device *sdev = ctlr->ms_sdev; > > + struct rdac_dh_data *h = get_rdac_data(sdev); > > struct request_queue *q = sdev->request_queue; > > int err, retry_cnt = RDAC_RETRY_COUNT; > > + struct rdac_queue_data *tmp, *qdata; > > + LIST_HEAD(list); > > + u8 *lun_table; > > + > > + spin_lock(&ctlr->ms_lock); > > + list_splice_init(&ctlr->ms_head, &list); > > + ctlr->ms_queued = 0; > > + ctlr->ms_sdev = NULL; > > + spin_unlock(&ctlr->ms_lock); > > + > > + if (ctlr->use_ms10) > > + lun_table = ctlr->mode_select.expanded.lun_table; > > + else > > + lun_table = ctlr->mode_select.legacy.lun_table; > > > > retry: > > err = SCSI_DH_RES_TEMP_UNAVAIL; > > @@ -499,13 +535,17 @@ retry: > > if (!rq) > > goto done; > > > > - sdev_printk(KERN_INFO, sdev, "%s MODE_SELECT command.\n", > > + list_for_each_entry(qdata, &list, entry) { > > + lun_table[qdata->h->lun] = 0x81; > > + } > > + > > + printk(KERN_INFO "%s MODE_SELECT command.\n", > > (retry_cnt == RDAC_RETRY_COUNT) ? "queueing" : "retrying"); > > > > err = blk_execute_rq(q, NULL, rq, 1); > > blk_put_request(rq); > > if (err != SCSI_DH_OK) { > > - err = mode_select_handle_sense(sdev, h->sense); > > + err = mode_select_handle_sense(h->sense); > > if (err == SCSI_DH_RETRY && retry_cnt--) > > goto retry; > > } > > @@ -513,10 +553,45 @@ retry: > > h->state = RDAC_STATE_ACTIVE; > > > > done: > > - return err; > > + list_for_each_entry_safe(qdata, tmp, &list, entry) { > > + list_del(&qdata->entry); > > + if (err == SCSI_DH_OK) > > + qdata->h->state = RDAC_STATE_ACTIVE; > > + if (qdata->callback_fn) > > + qdata->callback_fn(qdata->callback_data, err); > > + kfree(qdata); > > + } > > + return; > > } > > > > -static int rdac_activate(struct scsi_device *sdev, activate_complete > > fn, void *data) > > +static int queue_mode_select(struct scsi_device *sdev, > > + activate_complete fn, void *data) > > +{ > > + struct rdac_queue_data *qdata; > > + struct rdac_controller *ctlr; > > + > > + qdata = kzalloc(sizeof(*qdata), GFP_KERNEL); > > + if (!qdata) > > + return SCSI_DH_RETRY; > > + > > + qdata->h = get_rdac_data(sdev); > > + qdata->callback_fn = fn; > > + qdata->callback_data = data; > > + > > + ctlr = qdata->h->ctlr; > > + spin_lock(&ctlr->ms_lock); > > + list_add_tail(&qdata->entry, &ctlr->ms_head); > > + if (!ctlr->ms_queued) { > > + ctlr->ms_queued = 1; > > + ctlr->ms_sdev = sdev; > > + queue_work(kmpath_rdacd, &ctlr->ms_work); > > + } > > + spin_unlock(&ctlr->ms_lock); > > + return SCSI_DH_OK; > > +} > > + > > +static int rdac_activate(struct scsi_device *sdev, > > + activate_complete fn, void *data) > > { > > struct rdac_dh_data *h = get_rdac_data(sdev); > > int err = SCSI_DH_OK; > > @@ -536,8 +611,11 @@ static int rdac_activate(struct scsi_dev > > if (err != SCSI_DH_OK) > > goto done; > > } > > - if (h->lun_state == RDAC_LUN_UNOWNED) > > - err = send_mode_select(sdev, h); > > + if (h->lun_state == RDAC_LUN_UNOWNED) { > > + err = queue_mode_select(sdev, fn, data); > > + if (err == SCSI_DH_OK) > > + return 0; > > + } > > done: > > if (fn) > > fn(data, err); > > @@ -726,13 +804,26 @@ static int __init rdac_init(void) > > int r; > > > > r = scsi_register_device_handler(&rdac_dh); > > - if (r != 0) > > + if (r != 0) { > > printk(KERN_ERR "Failed to register scsi device handler."); > > + goto done; > > + } > > + > > + /* > > + * Create workqueue to handle mode selects for rdac > > + */ > > + kmpath_rdacd = create_singlethread_workqueue("kmpath_rdacd"); > > + if (!kmpath_rdacd) { > > + scsi_unregister_device_handler(&rdac_dh); > > + printk(KERN_ERR "kmpath_rdacd creation failed.\n"); > > + } > > +done: > > return r; > > } > > > > static void __exit rdac_exit(void) > > { > > + destroy_workqueue(kmpath_rdacd); > > scsi_unregister_device_handler(&rdac_dh); > > } > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-scsi" > > in > > the body of a message to majordomo@xxxxxxxxxxxxxxx > > More majordomo info at http://vger.kernel.org/majordomo-info.html -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
