On Sep 30, 2009, at 1:24 PM, John Brier wrote:
I've tried rebooting, restarting multipath (and iscsid), flushing multipath (-F), removing all the iscsi targets completely and then reinitializing the targets. Nothing changes the behavior. Here's output from /var/log/messages.. note the time between when the link becomes active (13:31:08) to when the path is reinstated (13:31:15): Sep 30 13:30:28 testbox kernel: connection7:0: ping timeout of 5 secs expired, recv timeout 5, last rx 4470061909, last ping 4470066909, now 4470071909 Sep 30 13:30:28 testbox kernel: connection7:0: detected conn error (1011) Sep 30 13:30:28 testbox multipathd: sdf: readsector0 checker reports path is down Sep 30 13:30:28 testbox multipathd: checker failed path 8:80 in map mpath0 Sep 30 13:30:28 testbox multipathd: mpath0: remaining active paths: 1 Sep 30 13:30:28 testbox kernel: device-mapper: multipath: Failing path 8:80. Sep 30 13:30:28 testbox iscsid: Kernel reported iSCSI connection 7:0 error (1011) state (3) Sep 30 13:30:29 testbox kernel: connection9:0: ping timeout of 5 secs expired, recv timeout 5, last rx 4470063232, last ping 4470068232, now 4470073232 Sep 30 13:30:29 testbox kernel: connection9:0: detected conn error (1011) Sep 30 13:30:29 testbox multipathd: sdg: readsector0 checker reports path is down Sep 30 13:30:29 testbox multipathd: checker failed path 8:96 in map mpath1 Sep 30 13:30:29 testbox multipathd: mpath1: remaining active paths: 1 Sep 30 13:30:29 testbox kernel: device-mapper: multipath: Failing path 8:96. Sep 30 13:30:30 testbox kernel: connection11:0: ping timeout of 5 secs expired, recv timeout 5, last rx 4470064373, last ping 4470069373, now 4470074373 Sep 30 13:30:30 testbox kernel: connection11:0: detected conn error (1011) Sep 30 13:30:30 testbox iscsid: Kernel reported iSCSI connection 9:0 error (1011) state (3) Sep 30 13:30:30 testbox multipathd: sdh: readsector0 checker reports path is down Sep 30 13:30:30 testbox multipathd: checker failed path 8:112 in map mpath2 Sep 30 13:30:30 testbox kernel: device-mapper: multipath: Failing path 8:112. Sep 30 13:30:30 testbox multipathd: mpath2: remaining active paths: 1 Sep 30 13:30:30 testbox multipathd: dm-4: add map (uevent) Sep 30 13:30:30 testbox multipathd: dm-4: devmap already registered Sep 30 13:30:30 testbox multipathd: dm-2: add map (uevent) Sep 30 13:30:30 testbox multipathd: dm-2: devmap already registered Sep 30 13:30:30 testbox multipathd: dm-3: add map (uevent) Sep 30 13:30:30 testbox multipathd: dm-3: devmap already registered Sep 30 13:30:31 testbox iscsid: Kernel reported iSCSI connection 11:0 error (1011) state (3) Sep 30 13:30:43 testbox kernel: session7: session recovery timed out after 15 secs Sep 30 13:30:43 testbox multipathd: sdf: readsector0 checker reports path is down Sep 30 13:30:44 testbox kernel: session9: session recovery timed out after 15 secs Sep 30 13:30:44 testbox multipathd: sdg: readsector0 checker reports path is down Sep 30 13:30:45 testbox kernel: session11: session recovery timed out after 15 secs Sep 30 13:30:45 testbox kernel: sd 13:0:0:0: SCSI error: return code = 0x000f0000 Sep 30 13:30:45 testbox kernel: end_request: I/O error, dev sdh, sector 407978223 Sep 30 13:30:45 testbox multipathd: sdh: readsector0 checker reports path is down Sep 30 13:30:55 testbox multipathd: sdf: readsector0 checker reports path is down Sep 30 13:31:05 testbox multipathd: sdg: readsector0 checker reports path is down Sep 30 13:31:05 testbox multipathd: sdh: readsector0 checker reports path is down Sep 30 13:31:05 testbox multipathd: sdf: readsector0 checker reports path is down Sep 30 13:31:05 testbox multipathd: sdg: readsector0 checker reports path is down Sep 30 13:31:05 testbox multipathd: sdh: readsector0 checker reports path is down Sep 30 13:31:08 testbox iscsid: connection9:0 is operational after recovery (3 attempts) Sep 30 13:31:08 testbox iscsid: connection11:0 is operational after recovery (3 attempts) Sep 30 13:31:11 testbox iscsid: connection7:0 is operational after recovery (3 attempts) Sep 30 13:31:15 testbox multipathd: sdf: readsector0 checker reports path is up Sep 30 13:31:15 testbox multipathd: 8:80: reinstated Sep 30 13:31:15 testbox multipathd: mpath0: remaining active paths: 2 Sep 30 13:31:15 testbox multipathd: sdg: readsector0 checker reports path is up Sep 30 13:31:15 testbox multipathd: 8:96: reinstated Sep 30 13:31:15 testbox multipathd: mpath1: remaining active paths: 2 Sep 30 13:31:15 testbox multipathd: sdh: readsector0 checker reports path is up Sep 30 13:31:15 testbox multipathd: 8:112: reinstated Sep 30 13:31:15 testbox multipathd: mpath2: remaining active paths: 2 Sep 30 13:31:15 testbox multipathd: dm-4: add map (uevent) Sep 30 13:31:15 testbox multipathd: dm-4: devmap already registered Sep 30 13:31:15 testbox multipathd: dm-2: add map (uevent) Sep 30 13:31:15 testbox multipathd: dm-2: devmap already registered Sep 30 13:31:15 testbox multipathd: dm-3: add map (uevent) Sep 30 13:31:15 testbox multipathd: dm-3: devmap already registered |
-- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel