RE: [PATCH 3/3][RESUBMIT] scsi_dh_rdac: changes for rdac debug logging

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks James.. Will take care next time..

________________________________________
From: James Bottomley [James.Bottomley@xxxxxxx]
Sent: Saturday, September 05, 2009 10:19 AM
To: Moger, Babu
Cc: 'linux-scsi@xxxxxxxxxxxxxxx'; 'device mapper development'; 'sekharan@xxxxxxxxxxxxxxxxxx'; Chauhan, Vijay; Stankey, Robert; Dachepalli, Sudhir
Subject: Re: [PATCH 3/3][RESUBMIT] scsi_dh_rdac: changes for rdac debug logging

On Thu, 2009-09-03 at 21:42 -0600, Moger, Babu wrote:
> Patch to add debugging stuff for rdac device handler.
> - Added a bit mask "module parameter" rdac_logging with 2 bits for each type of logging.
> - currently defined only two types of logging(failover and sense logging). Can be enhanced later if required.
> - By default only failover logging is enabled which is equivalent of current logging.
>
> Signed-off-by: Babu Moger <babu.moger@xxxxxxx>
> Reviewed-by: Vijay Chauhan <vijay.chauhan@xxxxxxx>
> Reviewed-by: Bob Stankey <Robert.stankey@xxxxxxx>
>
> ---
> --- linux-2.6.31-rc5/drivers/scsi/device_handler/scsi_dh_rdac.c.orig  2009-09-03 14:52:46.000000000 -0500
> +++ linux-2.6.31-rc5/drivers/scsi/device_handler/scsi_dh_rdac.c       2009-09-03 14:53:06.000000000 -0500
> @@ -201,6 +201,31 @@ static const char *lun_state[] =
>  static LIST_HEAD(ctlr_list);
>  static DEFINE_SPINLOCK(list_lock);
>
> +/*
> + * module parameter to enable rdac debug logging.
> + * 2 bits for each type of logging, only two types defined for now
> + * Can be enhanced if required at later point
> + */
> +static int rdac_logging = 1;
> +module_param(rdac_logging, int, S_IRUGO|S_IWUSR);
> +MODULE_PARM_DESC(rdac_logging, "A bit mask of rdac logging levels, "
> +             "Default is 1 - failover logging enabled, "
> +             "set it to 0xF to enable all the logs");
> +
> +#define RDAC_LOG_FAILOVER    0
> +#define RDAC_LOG_SENSE               2
> +
> +#define RDAC_LOG_BITS                2
> +
> +#define RDAC_LOG_LEVEL(SHIFT)  \
> +        ((rdac_logging >> (SHIFT)) & ((1 << (RDAC_LOG_BITS)) - 1))
> +
> +#define RDAC_LOG(SHIFT, sdev, f, arg...) \
> +do { \
> +     if (unlikely(RDAC_LOG_LEVEL(SHIFT))) \
> +             sdev_printk(KERN_INFO, sdev, RDAC_NAME ": " f "\n", ## arg); \
> +} while (0);
> +
>  static inline struct rdac_dh_data *get_rdac_data(struct scsi_device *sdev)
>  {
>       struct scsi_dh_data *scsi_dh_data = sdev->scsi_dh_data;
> @@ -469,6 +494,7 @@ static int mode_select_handle_sense(stru
>  {
>       struct scsi_sense_hdr sense_hdr;
>       int err = SCSI_DH_IO, ret;
> +     struct rdac_dh_data *h = get_rdac_data(sdev);
>
>       ret = scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE, &sense_hdr);
>       if (!ret)
> @@ -497,11 +523,14 @@ static int mode_select_handle_sense(stru
>                       err = SCSI_DH_RETRY;
>               break;
>       default:
> -             sdev_printk(KERN_INFO, sdev,
> -                         "MODE_SELECT failed with sense %02x/%02x/%02x.\n",
> -                         sense_hdr.sense_key, sense_hdr.asc, sense_hdr.ascq);
> +             break;
>       }
>
> +     RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, "
> +             "MODE_SELECT returned with sense %02x/%02x/%02x",
> +             (char *) h->ctlr->array_name, h->ctlr->index,
> +             sense_hdr.sense_key, sense_hdr.asc, sense_hdr.ascq);
> +
>  done:
>       return err;
>  }
> @@ -518,7 +547,9 @@ retry:
>       if (!rq)
>               goto done;
>
> -     sdev_printk(KERN_INFO, sdev, "%s MODE_SELECT command.\n",
> +     RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, "
> +             "%s MODE_SELECT command",
> +             (char *) h->ctlr->array_name, h->ctlr->index,
>               (retry_cnt == RDAC_RETRY_COUNT) ? "queueing" : "retrying");
>
>       err = blk_execute_rq(q, NULL, rq, 1);
> @@ -528,8 +559,12 @@ retry:
>               if (err == SCSI_DH_RETRY && retry_cnt--)
>                       goto retry;
>       }
> -     if (err == SCSI_DH_OK)
> +     if (err == SCSI_DH_OK) {
>               h->state = RDAC_STATE_ACTIVE;
> +             RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, "
> +                             "MODE_SELECT completed",
> +                             (char *) h->ctlr->array_name, h->ctlr->index);
> +     }
>
>  done:
>       return err;
> @@ -567,6 +602,12 @@ static int rdac_check_sense(struct scsi_
>                               struct scsi_sense_hdr *sense_hdr)
>  {
>       struct rdac_dh_data *h = get_rdac_data(sdev);
> +
> +     RDAC_LOG(RDAC_LOG_SENSE, sdev, "array %s, ctlr %d, "
> +                     "I/O returned with sense %02x/%02x/%02x",
> +                     (char *) h->ctlr->array_name, h->ctlr->index,
> +                     sense_hdr->sense_key, sense_hdr->asc, sense_hdr->ascq);
> +
>       switch (sense_hdr->sense_key) {
>       case NOT_READY:
>               if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x01)

Could you run these through checkpatch.pl before sending them next time?

ERROR: trailing whitespace
#30: FILE: drivers/scsi/device_handler/scsi_dh_rdac.c:204:
+/* $

ERROR: trailing whitespace
#32: FILE: drivers/scsi/device_handler/scsi_dh_rdac.c:206:
+ * 2 bits for each type of logging, only two types defined for now $

ERROR: code indent should use tabs where possible
#47: FILE: drivers/scsi/device_handler/scsi_dh_rdac.c:221:
+        ((rdac_logging >> (SHIFT)) & ((1 << (RDAC_LOG_BITS)) - 1))$

ERROR: trailing whitespace
#113: FILE: drivers/scsi/device_handler/scsi_dh_rdac.c:605:
+^I^I$

total: 4 errors, 0 warnings, 90 lines checked

I fixed it all up this time around.

James

--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel

[Index of Archives]     [DM Crypt]     [Fedora Desktop]     [ATA RAID]     [Fedora Marketing]     [Fedora Packaging]     [Fedora SELinux]     [Yosemite Discussion]     [KDE Users]     [Fedora Docs]

  Powered by Linux