On Mon, 24 Aug 2009 11:38:18 -0700
Chandra Seetharaman <sekharan@xxxxxxxxxx> wrote:
>
> You need to have a stanza similar to following one for your device
> in /etc/multipath.conf
> --------------------
> devices {
> device {
> vendor "IBM"
> product "1815"
> path_grouping_policy group_by_prio
> hardware_handler "1 rdac"
> path_checker rdac
> failback immediate
> no_path_retry queue
> prio_callout "/sbin/mpath_prio_tpc /dev/%n"
> }
> }
> ---------------------
Hi!
Yes, I've added that section, and still I get these:
Aug 24 20:47:38 node03 multipathd: 8:16: reinstated
Aug 24 20:47:38 node03 multipathd: 8:64: reinstated
Aug 24 20:47:38 node03 multipathd: qd: remaining active paths: 2
Aug 24 20:47:38 node03 multipathd: qd: switch to path group #2
Aug 24 20:47:38 node03 multipathd: qd: switch to path group #2
Aug 24 20:47:38 node03 multipathd: dm-0: add map (uevent)
Aug 24 20:47:38 node03 multipathd: dm-0: devmap already registered
Aug 24 20:47:47 node03 kernel: sd 1:0:1:0: queueing MODE_SELECT command.
Aug 24 20:47:48 node03 openais[5236]: [CMAN ] lost contact with quorum
device
Aug 24 20:47:58 node03 multipathd: dm-0: add map (uevent)
Aug 24 20:47:58 node03 multipathd: dm-0: devmap already registered
Aug 24 20:47:58 node03 multipathd: 8:64: mark as failed
Aug 24 20:47:58 node03 kernel: end_request: I/O error, dev sde, sector 8
Aug 24 20:47:58 node03 multipathd: qd: remaining active paths: 1
Aug 24 20:47:58 node03 kernel: device-mapper: multipath: Failing path
8:64.
Aug 24 20:47:58 node03 kernel: sd 1:0:0:0: queueing MODE_SELECT
command.
Aug 24 20:48:07 node03 multipathd: 8:64: reinstated
Aug 24 20:48:07 node03 multipathd: qd: remaining active paths: 2
Aug 24 20:48:07 node03 multipathd: qd: switch to path group #2
Aug 24 20:48:07 node03 multipathd: qd: switch to path group #2
Aug 24 20:48:07 node03 multipathd: dm-0: add map (uevent)
Aug 24 20:48:07 node03 multipathd: dm-0: devmap already registered
Aug 24 20:48:07 node03 kernel: sd 1:0:1:0: queueing MODE_SELECT command.
Aug 24 20:48:17 node03 multipathd: 8:64: reinstated
So it does not work ok :(
So far I've tried:
1. defaults with initiators set to "Linux"
one path constantly failed
2. AVT with initiators set to "Solaris (with Veritas DMP or other)"
multipath flopping constantly - every 20 minutes there is enter in
main log about path failing
3. RDAC with initiators set to "Linux"
logs filled with messages like these show up in the message,
constantly flip/flopping
I haven't patch scsi_dh_rdac because I don't know how to add support
for "SUN"/"LCSM100_S", and although I could figure it out, I'm not
really a fan of compiling the kernel if it is not absolutely necessary.
--
| Jakov Sosic | ICQ: 28410271 | PGP: 0x965CAE2D |
=================================================================
| start fighting cancer -> http://www.worldcommunitygrid.org/ |
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
