On Thu, Jun 25 2009 at 11:48am -0400, Frans Pop <elendil@xxxxxxxxx> wrote: > On Thursday 25 June 2009, Martin K. Petersen wrote: > > >>>>> "Frans" == Frans Pop <elendil@xxxxxxxxx> writes: > > > > Frans> During boot of 2.6.31-rc1 on an arm EABI system I got the > > Frans> following errors: device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) > > Frans> initialised: dm-devel@xxxxxxxxxx device-mapper: table: 254:0: > > Frans> target device sda6 is misaligned device-mapper: table: 254:0: > > Frans> target device sda6 is misaligned device-mapper: table: 254:1: > > Frans> target device sda6 is misaligned device-mapper: table: 254:1: > > Frans> target device sda6 is misaligned > > > > Frans> Please advise and let me know what additional info is needed. > > > > What kind of disk is this? > > It's a standard SATA disk; the driver is sata_mv: > > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: ATA-7: HDT722516DLA380, V43OA91A, max UDMA/133 > ata1.00: 321672960 sectors, multi 0: LBA48 NCQ (depth 31/32) > ata1.00: configured for UDMA/133 > scsi 0:0:0:0: Direct-Access ATA HDT722516DLA380 V43O PQ: 0 ANSI: 5 > sd 0:0:0:0: [sda] 321672960 512-byte logical blocks: (164 GB/153 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sda: sda1 sda2 sda3 sda4 < sda5 sda6 > > > I've just also tested rc1 in the Hercules s390 emulator, and I get exactly > the same there on a virtual dasd disk: > > dasd-eckd 0.0.0121: New DASD 3390/02 (CU 3990/02) with 1113 cylinders, 15 heads, 224 sectors > dasd-eckd 0.0.0121: DASD with 4 KB/block, 801360 KB total size, 48 KB/track, compatible disk layout > dasdb:VOL1/ 0X0121: dasdb1 dasdb2 > [...] > device-mapper: table: 254:0: target device dasdb1 is misaligned > device-mapper: table: 254:0: target device dasdb2 is misaligned > device-mapper: table: 254:0: target device dasdb1 is misaligned > device-mapper: table: 254:0: target device dasdb2 is misaligned In addition to the other commands I asked for in my previous mail; please provide the output from the following commands on both your real and emulated configs: dmsetup ls dmsetup table Mike -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
