On Fri, Apr 24, 2009 at 10:24 PM, Chandra Seetharaman <sekharan@xxxxxxxxxx> wrote: > Hi Flavio, Hi Chandra ;) > > Since you are using LSI's (I think it is not IBM's :) rdac driver, which > do provide multipathing functionality (as you see only one device per > lun) why do you want to use dm-multipath ? I'm using dm-multipath to group LUN's at different storages. But, IBM DS4700 ERM just allows (really makes sense) read-write operations on the primary storage device, so this is why I need to different prio for paths. > > >From your explanation it looks like you want to use mirroring on top of > the multipathed storage (but you are trying to use multipath) ?! correct > me if I am wrong. Yes, exactly is. But the LSI RDAC driver is doing the one multipath channel (channel-A) for the the read-write LUN's (all r/w LUN's are in the same primary storage and have the same scsi_id) and another multipath channel (channel-B) for all read-only LUN's (all r/o LUN's are in the same *secundary* storage and have the same scsi_id). So, I've 2 devices that says to be the "same" by ERM, but one as primary=rw and another as secundary=ro, to reach primary i've channel-A and reach secundary i've channel-B. What I'm doing is: Grouping channel-A + channel-B into a single mpath device, and it is working as expected (i dont know if someone that really know about it would consider me a freak-crazy man, but it works). > > Following are based on my understanding as explained above :) > > BTW, dm-multipath will change the path group only when all the paths in > a path group fails. And, as soon as a path in the higher priority path > group comes back up (path checker returns success), dm-multipath will > start sending I/Os on that path. > > Looks like changing the "secondary=read-only" to primary=read-write is > not getting reflected in your prio callout functionality. > Here you figure out my problem with annoying log messages :). So I'd understand i need to change prio when changing storage primary/secundary role. :) > Since your path checker (tur) returns success for the path with higher > priority, mutipathd daemon reinstates that path, and since the path > priority of that group is higher than the other one, it is made the > active one, and i/os are sent on that path, which fails and that leads > to failing the path... but.... (goto the start of this paragraph :) > Ouch! ... I almost go into a infinity loop here ;). Well, you point my problem, now i'll think someway to calculate prio (inside that really restrict namespace) dynamically when changing the path. Really thanks, you make things a bit clear for me :). And if you (or anyone else) understand my scenario and knows it is not a good approach, please let me know before start production. Thanks all. -- Flávio do Carmo Júnior aka waKKu > > On Fri, 2009-04-24 at 20:47 -0300, Flavio Junior wrote: >> Hi folks, good evening. >> >> My idea is set dm-multipath to only change from a path if it fails. >> How can I do that? >> >> Setup is something as: >> >> - 2x DS4700 IBM Storages >> - 4x Fiber Switches (2 for each storage) >> - 4x Path to each LUN (2 controllers x 2 switches) - But it shows to >> me as a single device, because I'm using IBM rdac driver too. >> >> Now, I've a primary storage as read-write AND a secundary mirrored >> (bit by bit synchronous) as read-only. Of course, the LUN id's at each >> storage are different so comes my first "hack" using getuid_callout to >> group paths, and prio_callout to set priority higher for primary >> storage and lower for secundary one. >> >> Everything is working like a charm, configured as: >> >> Link: http://pastebin.com/f4de2f7ca >> >> # multipath.conf >> defaults { >> user_friendly_names yes >> path_grouping_policy failover >> path_checker tur >> hardware_handler "rdac" >> # getuid_callout "/sbin/scsi_id -g -u -s /block/%n" >> getuid_callout "/etc/multipath/get_lun_path.sh %n" >> # prio_callout /bin/true >> prio_callout "/bin/bash >> /etc/multipath/get_lun_path.sh %n prio" >> failback 8 >> } >> >> devices { >> device { >> vendor "dummy" >> product "dummy" >> prio_callout "/sbin/scsi_id" >> } >> } >> >> [root@pinky ~]# cat /etc/multipath/get_lun_path.sh >> #!/bin/bash >> >> DEVICE="$(/sbin/scsi_id -g -u -s /block/$1)" >> SCSI_ID_TABLE="/etc/multipath/scsi_id_multipath" >> >> if [ $# -lt 1 ]; then >> exit 1 >> fi >> >> if [ "$2" == "prio" ]; then >> while read SCSI_ID WWID PRIO; do [ "$SCSI_ID" == "${DEVICE}" ] >> && echo $PRIO; done < $SCSI_ID_TABLE >> exit 0 >> else >> while read SCSI_ID WWID PRIO; do [ "$SCSI_ID" == "${DEVICE}" ] >> && echo $WWID; done < $SCSI_ID_TABLE >> exit 0 >> fi >> >> [root@pinky ~]# cat /etc/multipath/scsi_id_multipath >> 3600a0b800048834e0000150149dcc594 HomeMaildir1 2 >> 3600a0b80004884c4000016e649dcc5a5 HomeMaildir2 2 >> 3600a0b80004884c4000016e449dcc534 WebPages 2 >> 3600a0b800048834e000014ff49dcc51b MailQuorumDisk 2 >> 3600a0b800048834e0000172c49e76cbb FileSystemDLM 2 >> 3600a0b80004885b40000b78f49dcd7f8 MailQuorumDisk 1 >> 3600a0b80004885b40000b79149dcd817 HomeMaildir1 1 >> 3600a0b80004885a00000c13349dcd9e5 HomeMaildir2 1 >> 3600a0b80004885b40000baa149ec46b5 FileSystemDLM 1 >> 3600a0b80004885a00000c13149dcd9c3 WebPages 1 >> >> [root@pinky ~]# multipath -ll >> fs_dlm0 (FileSystemDLM) dm-8 IBM,VirtualDisk >> [size=300M][features=0][hwhandler=0][rw] >> \_ round-robin 0 [prio=2][active] >> \_ 3:0:0:4 sdf 8:80 [active][ready] >> \_ round-robin 0 [prio=1][enabled] >> \_ 3:0:1:3 sdj 8:144 [active][ready] >> homemaildir1 (HomeMaildir2) dm-5 IBM,VirtualDisk >> [size=25G][features=0][hwhandler=0][rw] >> \_ round-robin 0 [prio=2][active] >> \_ 3:0:0:1 sdc 8:32 [active][ready] >> \_ round-robin 0 [prio=1][enabled] >> \_ 3:0:1:2 sdi 8:128 [active][ready] >> webpages0 (WebPages) dm-6 IBM,VirtualDisk >> [size=4.0G][features=0][hwhandler=0][rw] >> \_ round-robin 0 [prio=2][active] >> \_ 3:0:0:2 sdd 8:48 [active][ready] >> \_ round-robin 0 [prio=1][enabled] >> \_ 3:0:1:4 sdk 8:160 [active][ready] >> homemaildir0 (HomeMaildir1) dm-4 IBM,VirtualDisk >> [size=25G][features=0][hwhandler=0][rw] >> \_ round-robin 0 [prio=2][active] >> \_ 3:0:0:0 sdb 8:16 [active][ready] >> \_ round-robin 0 [prio=1][enabled] >> \_ 3:0:1:1 sdh 8:112 [active][ready] >> qdisk0 (MailQuorumDisk) dm-7 IBM,VirtualDisk >> [size=200M][features=0][hwhandler=0][rw] >> \_ round-robin 0 [prio=2][active] >> \_ 3:0:0:3 sde 8:64 [active][ready] >> \_ round-robin 0 [prio=1][enabled] >> \_ 3:0:1:0 sdg 8:96 [active][ready] >> >> ##### >> >> The problem comes when my higher priority path goes down (it happens >> if I change secundary=read-only storage role to primary=read-write), >> so dm-multipath fail to secundary path but it keeps trying to change >> back for my "primary" path, and fill /var/log/messages with it (is at >> last of above post link): >> >> Apr 24 20:26:52 cerebro multipathd: homemaildir0: switch to path group #2 >> Apr 24 20:26:53 cerebro kernel: 91 >> [RAIDarray.mpp]IBM_DS4700_SITE1:1:0:0 Unrecognized SK - 7 >> Apr 24 20:26:53 cerebro kernel: 492 >> [RAIDarray.mpp]IBM_DS4700_SITE1:1:0:0 IO FAILURE. vcmnd SN 20095 pdev >> H1:C0:T1:L0 0x07/0x27/0x00 0x08000002 mpp_status:1 >> Apr 24 20:26:53 cerebro kernel: sd 3:0:1:0: SCSI error: return code = 0x08000002 >> Apr 24 20:26:53 cerebro kernel: sdg: Current: sense key: Data Protect >> Apr 24 20:26:53 cerebro kernel: Add. Sense: Write protected >> Apr 24 20:26:53 cerebro kernel: >> Apr 24 20:26:53 cerebro kernel: end_request: I/O error, dev sdg, sector 1289 >> Apr 24 20:26:53 cerebro kernel: device-mapper: multipath: Failing path 8:96. >> Apr 24 20:26:53 cerebro multipathd: dm-5: add map (uevent) >> Apr 24 20:26:53 cerebro multipathd: dm-5: devmap already registered >> Apr 24 20:26:58 cerebro multipathd: 8:96: mark as failed >> Apr 24 20:26:58 cerebro multipathd: homemaildir0: remaining active paths: 1 >> Apr 24 20:26:58 cerebro multipathd: sdg: tur checker reports path is up >> Apr 24 20:26:58 cerebro multipathd: 8:96: reinstated >> Apr 24 20:26:58 cerebro multipathd: homemaildir0: remaining active paths: 2 >> Apr 24 20:26:58 cerebro multipathd: dm-5: add map (uevent) >> Apr 24 20:26:58 cerebro multipathd: dm-5: devmap already registered >> Apr 24 20:27:06 cerebro multipathd: homemaildir0: switch to path group #2 >> Apr 24 20:27:07 cerebro kernel: 91 >> [RAIDarray.mpp]IBM_DS4700_SITE1:1:0:0 Unrecognized SK - 7 >> Apr 24 20:27:07 cerebro kernel: 492 >> [RAIDarray.mpp]IBM_DS4700_SITE1:1:0:0 IO FAILURE. vcmnd SN 20212 pdev >> H1:C0:T1:L0 0x07/0x27/0x00 0x08000002 mpp_status:1 >> Apr 24 20:27:07 cerebro kernel: sd 3:0:1:0: SCSI error: return code = 0x08000002 >> Apr 24 20:27:07 cerebro kernel: sdg: Current: sense key: Data Protect >> Apr 24 20:27:07 cerebro kernel: Add. Sense: Write protected >> Apr 24 20:27:07 cerebro kernel: >> Apr 24 20:27:07 cerebro kernel: end_request: I/O error, dev sdg, sector 1289 >> Apr 24 20:27:07 cerebro kernel: device-mapper: multipath: Failing path 8:96. >> Apr 24 20:27:07 cerebro multipathd: dm-5: add map (uevent) >> Apr 24 20:27:07 cerebro multipathd: dm-5: devmap already registered >> Apr 24 20:27:07 cerebro multipathd: 8:96: mark as failed >> Apr 24 20:27:07 cerebro multipathd: homemaildir0: remaining active paths: 1 >> Apr 24 20:27:12 cerebro multipathd: sdg: tur checker reports path is up >> Apr 24 20:27:12 cerebro multipathd: 8:96: reinstated >> Apr 24 20:27:12 cerebro multipathd: homemaildir0: remaining active paths: 2 >> Apr 24 20:27:12 cerebro multipathd: dm-5: add map (uevent) >> Apr 24 20:27:12 cerebro multipathd: dm-5: devmap already registered >> Apr 24 20:27:20 cerebro multipathd: homemaildir0: switch to path group #2 >> Apr 24 20:27:21 cerebro kernel: 91 >> [RAIDarray.mpp]IBM_DS4700_SITE1:1:0:0 Unrecognized SK - 7 >> Apr 24 20:27:21 cerebro kernel: 492 >> [RAIDarray.mpp]IBM_DS4700_SITE1:1:0:0 IO FAILURE. vcmnd SN 20305 pdev >> H1:C0:T1:L0 0x07/0x27/0x00 0x08000002 mpp_status:1 >> Apr 24 20:27:21 cerebro kernel: sd 3:0:1:0: SCSI error: return code = 0x08000002 >> Apr 24 20:27:21 cerebro kernel: sdg: Current: sense key: Data Protect >> Apr 24 20:27:21 cerebro kernel: Add. Sense: Write protected >> Apr 24 20:27:21 cerebro kernel: >> Apr 24 20:27:21 cerebro kernel: end_request: I/O error, dev sdg, sector 1289 >> Apr 24 20:27:21 cerebro kernel: device-mapper: multipath: Failing path 8:96. >> Apr 24 20:27:21 cerebro multipathd: dm-5: add map (uevent) >> Apr 24 20:27:21 cerebro multipathd: dm-5: devmap already registered >> Apr 24 20:27:21 cerebro multipathd: 8:96: mark as failed >> Apr 24 20:27:21 cerebro multipathd: homemaildir0: remaining active paths: 1 >> Apr 24 20:27:26 cerebro multipathd: sdg: tur checker reports path is up >> Apr 24 20:27:26 cerebro multipathd: 8:96: reinstated >> Apr 24 20:27:26 cerebro multipathd: homemaildir0: remaining active paths: 2 >> Apr 24 20:27:26 cerebro multipathd: dm-5: add map (uevent) >> Apr 24 20:27:26 cerebro multipathd: dm-5: devmap already registered >> Apr 24 20:27:34 cerebro multipathd: homemaildir0: switch to path group #2 >> Apr 24 20:27:35 cerebro kernel: 91 >> [RAIDarray.mpp]IBM_DS4700_SITE1:1:0:0 Unrecognized SK - 7 >> Apr 24 20:27:35 cerebro kernel: 492 >> [RAIDarray.mpp]IBM_DS4700_SITE1:1:0:0 IO FAILURE. vcmnd SN 20419 pdev >> H1:C0:T1:L0 0x07/0x27/0x00 0x08000002 mpp_status:1 >> Apr 24 20:27:35 cerebro kernel: sd 3:0:1:0: SCSI error: return code = 0x08000002 >> Apr 24 20:27:35 cerebro kernel: sdg: Current: sense key: Data Protect >> Apr 24 20:27:35 cerebro kernel: Add. Sense: Write protected >> Apr 24 20:27:35 cerebro kernel: >> Apr 24 20:27:35 cerebro kernel: end_request: I/O error, dev sdg, sector 1289 >> Apr 24 20:27:35 cerebro kernel: device-mapper: multipath: Failing path 8:96. >> Apr 24 20:27:35 cerebro multipathd: dm-5: add map (uevent) >> Apr 24 20:27:35 cerebro multipathd: dm-5: devmap already registered >> Apr 24 20:27:35 cerebro multipathd: 8:96: mark as failed >> Apr 24 20:27:35 cerebro multipathd: homemaildir0: remaining active paths: 1 >> Apr 24 20:27:40 cerebro multipathd: sdg: tur checker reports path is up >> Apr 24 20:27:40 cerebro multipathd: 8:96: reinstated >> Apr 24 20:27:40 cerebro multipathd: homemaildir0: remaining active paths: 2 >> Apr 24 20:27:40 cerebro multipathd: dm-5: add map (uevent) >> Apr 24 20:27:40 cerebro multipathd: dm-5: devmap already registered >> ############# >> >> >> My idea is set dm-multipath to only change from a path if it fails. >> How can I do that? >> >> Any comments, doubts or suggest for this config would be appreciated >> as i'm new to all this hardware/setup. >> >> Thanks in advance. >> >> -- >> >> Flávio do Carmo Júnior aka waKKu >> >> -- >> dm-devel mailing list >> dm-devel@xxxxxxxxxx >> https://www.redhat.com/mailman/listinfo/dm-devel > > -- > dm-devel mailing list > dm-devel@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/dm-devel > -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
