On Thu, Feb 5, 2009 at 8:16 PM, Bryn M. Reeves <bmr@xxxxxxxxxx> wrote:
Ok. I'll look into disabling mpp, and test the device-mapper failover by pulling cables and manually switching controller modules during
disk access.
Thank you.
ChristianChristian Røsnes wrote:That looks better! Seems like device-mapper multipath is configuring these OK now. You might want to just check that mpp is fully disabled if you're going with device-mapper (and also test some cable-pulls to make sure the RDAC failover happens properly) but this is certainly picking up your hw handler configuration now.
# multipath -ll
mpathe (36002219000918b4c00005b6c497e6632) dm-4 DELL,MD Virtual Disk
[size=5.5T][features=1 queue_if_no_path][hwhandler=1 rdac]
\_ round-robin 0 [prio=6][active]
\_ 9:0:0:1 sdi 8:128 [active][ready]
Ok. I'll look into disabling mpp, and test the device-mapper failover by pulling cables and manually switching controller modules during
disk access.
Thank you.
-- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
