RE: DM does not activate the paths if there are more than one path in path group during failover

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Here is full output of multipath -ll mpathf before the test.

[root@mymachine ~]# multipath -ll mpathf
error calling out /lib/udev/scsi_id -g -u -d /dev/sda
error calling out /lib/udev/scsi_id -g -u -d /dev/sdb
error calling out /lib/udev/scsi_id -g -u -d /dev/sdc
error calling out /lib/udev/scsi_id -g -u -d /dev/sdd
error calling out /lib/udev/scsi_id -g -u -d /dev/sdk
error calling out /lib/udev/scsi_id -g -u -d /dev/sdn
mpathf (3600a0b80000f519c0000cc8a48fc7d0b) dm-2 LSI,INF-01-00
[size=2.0G][features=0][hwhandler=1 rdac]
\_ round-robin 0 [prio=200][active]
 \_ 3:0:0:0 sde 8:64  [active][ready]
 \_ 3:0:2:0 sdg 8:96  [active][ready]
\_ round-robin 0 [prio=0][enabled]
 \_ 3:0:1:0 sdf 8:80  [active][ghost]
 \_ 3:0:3:0 sdh 8:112 [active][ghost]

Thanks
Babu Moger

-----Original Message-----
From: Chandra Seetharaman [mailto:sekharan@xxxxxxxxxx]
Sent: Tuesday, November 11, 2008 11:10 AM
To: Moger, Babu
Cc: linux-scsi@xxxxxxxxxxxxxxx; device-mapper development; andmike@xxxxxxxxxxxxxxxxxx
Subject: RE: DM does not activate the paths if there are more than one path in path group during failover


On Tue, 2008-11-11 at 10:07 -0700, Moger, Babu wrote:
> Is your multipathd running?
>   Yes, multipathd deamon is running.
>
> BTW, why is the physical path state is showing "undef", it should be "ghost" or "ready"
>
>   This is because i am running the mainstream multipath-tools. That is the reason you are seeing "undef".  I have reverted back to native tools and i am still seeing the problem. Here the output of multipath -ll with native tools.
>
> mpathf (3600a0b80000f519c0000cc8a48fc7d0b) dm-2 LSI,INF-01-00
> [size=2.0G][features=0][hwhandler=1 rdac]
> \_ round-robin 0 [prio=0][active]
>  \_ 3:0:1:0 sdf 8:80  [active][ready]
>  \_ 3:0:3:0 sdh 8:112 [failed][ready]
>

can you send me the full o/p multipath -ll mpathf;

prio=0 means that this path group is connected to the passive
controller, in which case "failed" is correct.

>
>
> -----Original Message-----
> From: Chandra Seetharaman [mailto:sekharan@xxxxxxxxxx]
> Sent: Monday, November 10, 2008 8:06 PM
> To: Moger, Babu
> Cc: linux-scsi@xxxxxxxxxxxxxxx; device-mapper development; andmike@xxxxxxxxxxxxxxxxxx
> Subject: Re: DM does not activate the paths if there are more than one path in path group during failover
>
>
> On Mon, 2008-11-10 at 17:45 -0700, Moger, Babu wrote:
> > Hi All,
> >   I have noticed one more problem with device mapper today.
> >
> > Summary:  If there are more than one path in the path group, device mapper does not activate the all the paths during the failover. DM only activates the first path in the path group. It does not call the function activate_path for the second path (or third so on). This seems like a major problem for me. Current code does not keep track of whether the path is already activated or not.  This leads DM using only first path and all other paths become unusable. This happens during the failover.
>
> We do not need to send activate to each "path" as all paths in a path group lead to the same controller and that controller is activated when the activate is sent on the first path itself.
>
> Is your multipathd running ?
>
> BTW, why is the physical path state is showing "undef", it should be "ghost" or "ready"
> >
> > Test case.
> > 1. Start the IO with all the paths.
> > 2. Fail the active path.
> > 3. Failover (mode select) will happen and passive path will be
> > activated 4. Only first path in path group is activated and other paths will be failed. I would expect the DM to activate all the paths in the path group. However this does not happen.
> >
> > Output of multipath -ll before the test.
> >
> > mpathf (3600a0b80000f519c0000cc8a48fc7d0b) dm-2 LSI,INF-01-00
> > [size=2.0G][features=0][hwhandler=1 rdac][rw] \_ round-robin 0
> > [prio=4][enabled]  \_ 3:0:0:0 sde 8:64  [active][undef] running  \_
> > 3:0:2:0 sdg 8:96  [active][undef] running \_ round-robin 0
> > [prio=2][enabled]  \_ 3:0:1:0 sdf 8:80  [active][undef] running  \_
> > 3:0:3:0 sdh 8:112 [active][undef] running
> >
> >
> > Output of multipath -ll after the test. Notice that second path has failed.
> >
> > mpathf (3600a0b80000f519c0000cc8a48fc7d0b) dm-2 LSI,INF-01-00
> > [size=2.0G][features=0][hwhandler=1 rdac][rw] \_ round-robin 0
> > [prio=2][enabled]  \_ 3:0:1:0 sdf 8:80  [active][undef] running  \_
> > 3:0:3:0 sdh 8:112 [failed][undef] running
> >
> >
> > Here is the patch, I have used to work-around the problem. I am sure
> > this is not the place we want to add the fix. However, this patch
> > should give you understanding of the problem. This patch will set the
> > flags
> > m->pg_init_required and m->queue_io whenever D-M select new path in the path group whenever the repeat_count is exhausted.
> >
> > --- linux-2.6.28-rc4/drivers/md/dm-mpath.c.orig 2008-11-10
> > 17:50:24.000000000 -0600
> > +++ linux-2.6.28-rc4/drivers/md/dm-mpath.c      2008-11-10 17:51:36.000000000 -0600
> > @@ -245,6 +245,10 @@ static int __choose_path_in_pg(struct mu
> >         if (!path)
> >                 return -ENXIO;
> >
> > +       /* Set the pg_init_required flag to activate this path */
> > +       m->pg_init_required = 1;
> > +       m->queue_io = 1;
> > +
> >         m->current_pgpath = path_to_pgpath(path);
> >
> >         if (m->current_pg != pg)
> >
> >
> >
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel

[Index of Archives]     [DM Crypt]     [Fedora Desktop]     [ATA RAID]     [Fedora Marketing]     [Fedora Packaging]     [Fedora SELinux]     [Yosemite Discussion]     [KDE Users]     [Fedora Docs]

  Powered by Linux