This patch enables request-based dm.
o Request-based dm and bio-based dm coexist, since there are
some target drivers which are more fitting to bio-based dm.
Also, there are other bio-based devices in the kernel
(e.g. md, loop).
Since bio-based device can't receive struct request,
there are some limitations on device stacking between
bio-based and request-based.
type of underlying device
bio-based requeset-based
----------------------------------------------
bio-based OK OK
request-based NG OK
The device type is recognized by the queue flag in the kernel,
so dm follows that.
o The type of a dm device is decided at the first table loading time.
Until then, mempool creations are deferred, since mempools for
request-based dm are different from those for bio-based dm.
Once the type of a dm device is decided, the type can't be changed.
o Currently, request-based dm supports only tables that have a single
target. To support multiple targets, we need to support request
splitting or prevent bio/request from spanning multiple targets.
The former needs lots of changes in the block layer, and the latter
needs that all target drivers support merge() function.
Both will take a time.
Signed-off-by: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
Signed-off-by: Jun'ichi Nomura <j-nomura@xxxxxxxxxxxxx>
Cc: Alasdair G Kergon <agk@xxxxxxxxxx>
---
drivers/md/dm-ioctl.c | 13 ++++
drivers/md/dm-table.c | 68 +++++++++++++++++++++++
drivers/md/dm.c | 123 ++++++++++++++++++++++++++++++++++--------
drivers/md/dm.h | 15 +++++
include/linux/device-mapper.h | 1
5 files changed, 197 insertions(+), 23 deletions(-)
Index: 2.6.27-rc8/drivers/md/dm-table.c
===================================================================
--- 2.6.27-rc8.orig/drivers/md/dm-table.c
+++ 2.6.27-rc8/drivers/md/dm-table.c
@@ -108,6 +108,8 @@ static void combine_restrictions_low(str
lhs->bounce_pfn = min_not_zero(lhs->bounce_pfn, rhs->bounce_pfn);
lhs->no_cluster |= rhs->no_cluster;
+
+ lhs->no_request_stacking |= rhs->no_request_stacking;
}
/*
@@ -526,6 +528,8 @@ void dm_set_device_limits(struct dm_targ
rs->bounce_pfn = min_not_zero(rs->bounce_pfn, q->bounce_pfn);
rs->no_cluster |= !test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags);
+
+ rs->no_request_stacking |= !blk_queue_stackable(q);
}
EXPORT_SYMBOL_GPL(dm_set_device_limits);
@@ -738,6 +742,66 @@ int dm_table_add_target(struct dm_table
return r;
}
+int dm_table_set_type(struct dm_table *t)
+{
+ int i;
+ int bio_based = 0, request_based = 0;
+ struct dm_target *tgt;
+
+ for (i = 0; i < t->num_targets; i++) {
+ tgt = t->targets + i;
+ if (tgt->type->map_rq)
+ request_based = 1;
+ else
+ bio_based = 1;
+
+ if (bio_based && request_based) {
+ DMWARN("Inconsistent table: different target types"
+ " can't be mixed up");
+ return -EINVAL;
+ }
+ }
+
+ if (bio_based) {
+ /* We must use this table as bio-based */
+ t->limits.no_request_stacking = 1;
+ return 0;
+ }
+
+ BUG_ON(!request_based); /* No targets in this table */
+
+ /* Non-request-stackable devices can't be used for request-based dm */
+ if (t->limits.no_request_stacking) {
+ DMWARN("table load rejected: including non-request-stackable"
+ " devices");
+ return -EINVAL;
+ }
+
+ /*
+ * Request-based dm supports only tables that have a single target now.
+ * To support multiple targets, request splitting support is needed,
+ * and that needs lots of changes in the block-layer.
+ * (e.g. request completion process for partial completion.)
+ */
+ if (t->num_targets > 1) {
+ DMWARN("Request-based dm doesn't support multiple targets yet");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+int dm_table_get_type(struct dm_table *t)
+{
+ return t->limits.no_request_stacking ?
+ DM_TYPE_BIO_BASED : DM_TYPE_REQUEST_BASED;
+}
+
+int dm_table_request_based(struct dm_table *t)
+{
+ return dm_table_get_type(t) == DM_TYPE_REQUEST_BASED;
+}
+
static int setup_indexes(struct dm_table *t)
{
int i;
@@ -868,6 +932,10 @@ void dm_table_set_restrictions(struct dm
else
queue_flag_set_unlocked(QUEUE_FLAG_CLUSTER, q);
+ if (t->limits.no_request_stacking)
+ queue_flag_clear_unlocked(QUEUE_FLAG_STACKABLE, q);
+ else
+ queue_flag_set_unlocked(QUEUE_FLAG_STACKABLE, q);
}
unsigned int dm_table_get_num_targets(struct dm_table *t)
Index: 2.6.27-rc8/drivers/md/dm.c
===================================================================
--- 2.6.27-rc8.orig/drivers/md/dm.c
+++ 2.6.27-rc8/drivers/md/dm.c
@@ -160,6 +160,8 @@ struct mapped_device {
struct bio_set *bs;
+ unsigned int mempool_type; /* Type of mempools above. */
+
/*
* Event handling.
*/
@@ -1712,10 +1714,22 @@ static struct mapped_device *alloc_dev(i
INIT_LIST_HEAD(&md->uevent_list);
spin_lock_init(&md->uevent_lock);
- md->queue = blk_alloc_queue(GFP_KERNEL);
+ md->queue = blk_init_queue(dm_request_fn, NULL);
if (!md->queue)
goto bad_queue;
+ /*
+ * Request-based dm devices cannot be stacked on top of bio-based dm
+ * devices. The type of this dm device has not been decided yet,
+ * although we initialized the queue using blk_init_queue().
+ * The type is decided at the first table loading time.
+ * To prevent problematic device stacking, clear the queue flag
+ * for request stacking support until then.
+ *
+ * This queue is new, so no concurrency on the queue_flags.
+ */
+ queue_flag_clear_unlocked(QUEUE_FLAG_STACKABLE, md->queue);
+ md->saved_make_request_fn = md->queue->make_request_fn;
md->queue->queuedata = md;
md->queue->backing_dev_info.congested_fn = dm_any_congested;
md->queue->backing_dev_info.congested_data = md;
@@ -1723,18 +1737,9 @@ static struct mapped_device *alloc_dev(i
blk_queue_bounce_limit(md->queue, BLK_BOUNCE_ANY);
md->queue->unplug_fn = dm_unplug_all;
blk_queue_merge_bvec(md->queue, dm_merge_bvec);
-
- md->io_pool = mempool_create_slab_pool(MIN_IOS, _io_cache);
- if (!md->io_pool)
- goto bad_io_pool;
-
- md->tio_pool = mempool_create_slab_pool(MIN_IOS, _tio_cache);
- if (!md->tio_pool)
- goto bad_tio_pool;
-
- md->bs = bioset_create(16, 16);
- if (!md->bs)
- goto bad_no_bioset;
+ blk_queue_softirq_done(md->queue, dm_softirq_done);
+ blk_queue_prep_rq(md->queue, dm_prep_fn);
+ blk_queue_lld_busy(md->queue, dm_lld_busy);
md->disk = alloc_disk(1);
if (!md->disk)
@@ -1769,12 +1774,6 @@ static struct mapped_device *alloc_dev(i
bad_thread:
put_disk(md->disk);
bad_disk:
- bioset_free(md->bs);
-bad_no_bioset:
- mempool_destroy(md->tio_pool);
-bad_tio_pool:
- mempool_destroy(md->io_pool);
-bad_io_pool:
blk_cleanup_queue(md->queue);
bad_queue:
free_minor(minor);
@@ -1796,9 +1795,12 @@ static void free_dev(struct mapped_devic
bdput(md->suspended_bdev);
}
destroy_workqueue(md->wq);
- mempool_destroy(md->tio_pool);
- mempool_destroy(md->io_pool);
- bioset_free(md->bs);
+ if (md->tio_pool)
+ mempool_destroy(md->tio_pool);
+ if (md->io_pool)
+ mempool_destroy(md->io_pool);
+ if (md->bs)
+ bioset_free(md->bs);
del_gendisk(md->disk);
free_minor(minor);
@@ -1861,6 +1863,16 @@ static int __bind(struct mapped_device *
dm_table_get(t);
dm_table_event_callback(t, event_callback, md);
+ /*
+ * The queue hasn't been stopped yet, if the old table type wasn't
+ * for request-based during suspension. So stop it to prevent
+ * I/O mapping before resume.
+ * This must be done before setting the queue restrictions,
+ * because request-based dm may be run just after the setting.
+ */
+ if (dm_table_request_based(t) && !blk_queue_stopped(q))
+ stop_queue(q);
+
write_lock(&md->map_lock);
md->map = t;
dm_table_set_restrictions(t, q);
@@ -2010,7 +2022,13 @@ static void __flush_deferred_io(struct m
struct bio *c;
while ((c = bio_list_pop(&md->deferred))) {
- if (__split_bio(md, c))
+ /*
+ * Some bios might have been queued here during suspension
+ * before setting of request-based dm in resume
+ */
+ if (dm_request_based(md))
+ generic_make_request(c);
+ else if (__split_bio(md, c))
bio_io_error(c);
}
@@ -2428,6 +2446,65 @@ int dm_noflush_suspending(struct dm_targ
}
EXPORT_SYMBOL_GPL(dm_noflush_suspending);
+int dm_init_md_mempool(struct mapped_device *md, int type)
+{
+ if (unlikely(type == DM_TYPE_NONE)) {
+ DMWARN("no type is specified, can't initialize mempool");
+ return -EINVAL;
+ }
+
+ if (md->mempool_type == type)
+ return 0;
+
+ if (md->map) {
+ /* The md has been using, can't change the mempool type */
+ DMWARN("can't change mempool type after a table is bound");
+ return -EINVAL;
+ }
+
+ /* Not using the md yet, we can still change the mempool type */
+ if (md->mempool_type != DM_TYPE_NONE) {
+ mempool_destroy(md->io_pool);
+ md->io_pool = NULL;
+ mempool_destroy(md->tio_pool);
+ md->tio_pool = NULL;
+ bioset_free(md->bs);
+ md->bs = NULL;
+ md->mempool_type = DM_TYPE_NONE;
+ }
+
+ md->io_pool = (type == DM_TYPE_BIO_BASED) ?
+ mempool_create_slab_pool(MIN_IOS, _io_cache) :
+ mempool_create_slab_pool(MIN_IOS, _bio_info_cache);
+ if (!md->io_pool)
+ return -ENOMEM;
+
+ md->tio_pool = (type == DM_TYPE_BIO_BASED) ?
+ mempool_create_slab_pool(MIN_IOS, _tio_cache) :
+ mempool_create_slab_pool(MIN_IOS, _rq_tio_cache);
+ if (!md->tio_pool)
+ goto free_io_pool_and_out;
+
+ md->bs = (type == DM_TYPE_BIO_BASED) ?
+ bioset_create(16, 16) : bioset_create(MIN_IOS, MIN_IOS);
+ if (!md->bs)
+ goto free_tio_pool_and_out;
+
+ md->mempool_type = type;
+
+ return 0;
+
+free_tio_pool_and_out:
+ mempool_destroy(md->tio_pool);
+ md->tio_pool = NULL;
+
+free_io_pool_and_out:
+ mempool_destroy(md->io_pool);
+ md->io_pool = NULL;
+
+ return -ENOMEM;
+}
+
static struct block_device_operations dm_blk_dops = {
.open = dm_blk_open,
.release = dm_blk_close,
Index: 2.6.27-rc8/drivers/md/dm.h
===================================================================
--- 2.6.27-rc8.orig/drivers/md/dm.h
+++ 2.6.27-rc8/drivers/md/dm.h
@@ -23,6 +23,13 @@
#define DM_SUSPEND_NOFLUSH_FLAG (1 << 1)
/*
+ * Type of table and mapped_device's mempool
+ */
+#define DM_TYPE_NONE 0
+#define DM_TYPE_BIO_BASED 1
+#define DM_TYPE_REQUEST_BASED 2
+
+/*
* List of devices that a metadevice uses and should open/close.
*/
struct dm_dev_internal {
@@ -47,6 +54,9 @@ void dm_table_postsuspend_targets(struct
int dm_table_resume_targets(struct dm_table *t);
int dm_table_any_congested(struct dm_table *t, int bdi_bits);
int dm_table_any_busy_target(struct dm_table *t);
+int dm_table_set_type(struct dm_table *t);
+int dm_table_get_type(struct dm_table *t);
+int dm_table_request_based(struct dm_table *t);
/*
* To check the return value from dm_table_find_target().
@@ -99,4 +109,9 @@ void dm_kobject_uevent(struct mapped_dev
int dm_kcopyd_init(void);
void dm_kcopyd_exit(void);
+/*
+ * Mempool initializer for a mapped_device
+ */
+int dm_init_md_mempool(struct mapped_device *md, int type);
+
#endif
Index: 2.6.27-rc8/drivers/md/dm-ioctl.c
===================================================================
--- 2.6.27-rc8.orig/drivers/md/dm-ioctl.c
+++ 2.6.27-rc8/drivers/md/dm-ioctl.c
@@ -1045,6 +1045,12 @@ static int populate_table(struct dm_tabl
next = spec->next;
}
+ r = dm_table_set_type(table);
+ if (r) {
+ DMWARN("unable to set table type");
+ return r;
+ }
+
return dm_table_complete(table);
}
@@ -1069,6 +1075,13 @@ static int table_load(struct dm_ioctl *p
goto out;
}
+ r = dm_init_md_mempool(md, dm_table_get_type(t));
+ if (r) {
+ DMWARN("unable to initialize the md mempools for this table");
+ dm_table_put(t);
+ goto out;
+ }
+
down_write(&_hash_lock);
hc = dm_get_mdptr(md);
if (!hc || hc->md != md) {
Index: 2.6.27-rc8/include/linux/device-mapper.h
===================================================================
--- 2.6.27-rc8.orig/include/linux/device-mapper.h
+++ 2.6.27-rc8/include/linux/device-mapper.h
@@ -145,6 +145,7 @@ struct io_restrictions {
unsigned short max_hw_segments;
unsigned short max_phys_segments;
unsigned char no_cluster; /* inverted so that 0 is default */
+ unsigned char no_request_stacking;
};
struct dm_target {
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
