[PATCH 02/13] block: add request submission interface

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch adds blk_submit_request(), a generic request submission
interface for request stacking drivers.
Request-based dm will use it to submit their clones to underlying
devices.

blk_rq_check_limits() is also added because it is possible that
the lower queue has stronger limitations than the upper queue
if multiple drivers are stacking at request-level.
Not only for blk_submit_request()'s internal use, the function
will be used by request-based dm when the queue limitation is
modified (e.g. by replacing dm's table).


Signed-off-by: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
Signed-off-by: Jun'ichi Nomura <j-nomura@xxxxxxxxxxxxx>
Cc: Jens Axboe <jens.axboe@xxxxxxxxxx>
---
 block/blk-core.c       |   81 +++++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/blkdev.h |    2 +
 2 files changed, 83 insertions(+)

Index: 2.6.27-rc6/block/blk-core.c
===================================================================
--- 2.6.27-rc6.orig/block/blk-core.c
+++ 2.6.27-rc6/block/blk-core.c
@@ -1517,6 +1517,87 @@ void submit_bio(int rw, struct bio *bio)
 EXPORT_SYMBOL(submit_bio);
 
 /**
+ * blk_rq_check_limits - Helper function to check a request for the queue limit
+ * @q:  the queue
+ * @rq: the request being checked
+ *
+ * Description:
+ *    @rq may have been made based on weaker limitations of upper-level queues
+ *    in request stacking drivers, and it may violate the limitation of @q.
+ *    Since the block layer and the underlying device driver trust @rq
+ *    after it is inserted to @q, it should be checked against @q before
+ *    the insertion using this generic function.
+ *
+ *    This function should also be useful for request stacking drivers
+ *    in some cases below, so export this fuction.
+ *    Request stacking drivers like request-based dm may change the queue
+ *    limits while requests are in the queue (e.g. dm's table swapping).
+ *    Such request stacking drivers should check those requests agaist
+ *    the new queue limits again when they dispatch those requests,
+ *    although such checkings are also done against the old queue limits
+ *    when submitting requests.
+ */
+int blk_rq_check_limits(struct request_queue *q, struct request *rq)
+{
+	if (rq->nr_sectors > q->max_sectors ||
+	    rq->data_len > q->max_hw_sectors << 9) {
+		printk(KERN_ERR "%s: over max size limit.\n", __func__);
+		return -EIO;
+	}
+
+	/*
+	 * queue's settings related to segment counting like q->bounce_pfn
+	 * may differ from that of other stacking queues.
+	 * Recalculate it to check the request correctly on this queue's
+	 * limitation.
+	 */
+	blk_recalc_rq_segments(rq);
+	if (rq->nr_phys_segments > q->max_phys_segments ||
+	    rq->nr_hw_segments > q->max_hw_segments) {
+		printk(KERN_ERR "%s: over max segments limit.\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(blk_rq_check_limits);
+
+/**
+ * blk_submit_request - Helper for stacking drivers to submit a request
+ * @q:  the queue to submit the request
+ * @rq: the request being queued
+ */
+int blk_submit_request(struct request_queue *q, struct request *rq)
+{
+	unsigned long flags;
+
+	if (blk_rq_check_limits(q, rq))
+		return -EIO;
+
+#ifdef CONFIG_FAIL_MAKE_REQUEST
+	if (rq->rq_disk && rq->rq_disk->flags & GENHD_FL_FAIL &&
+	    should_fail(&fail_make_request, blk_rq_bytes(rq)))
+		return -EIO;
+#endif
+
+	spin_lock_irqsave(q->queue_lock, flags);
+
+	/*
+	 * Submitting request must be dequeued before calling this function
+	 * because it will be linked to another request_queue
+	 */
+	BUG_ON(blk_queued_rq(rq));
+
+	drive_stat_acct(rq, 1);
+	__elv_add_request(q, rq, ELEVATOR_INSERT_BACK, 0);
+
+	spin_unlock_irqrestore(q->queue_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(blk_submit_request);
+
+/**
  * __end_that_request_first - end I/O on a request
  * @req:      the request being processed
  * @error:    0 for success, < 0 for error
Index: 2.6.27-rc6/include/linux/blkdev.h
===================================================================
--- 2.6.27-rc6.orig/include/linux/blkdev.h
+++ 2.6.27-rc6/include/linux/blkdev.h
@@ -664,6 +664,8 @@ extern void __blk_put_request(struct req
 extern struct request *blk_get_request(struct request_queue *, int, gfp_t);
 extern void blk_insert_request(struct request_queue *, struct request *, int, void *);
 extern void blk_requeue_request(struct request_queue *, struct request *);
+extern int blk_rq_check_limits(struct request_queue *q, struct request *rq);
+extern int blk_submit_request(struct request_queue *q, struct request *rq);
 extern void blk_plug_device(struct request_queue *);
 extern void blk_plug_device_unlocked(struct request_queue *);
 extern int blk_remove_plug(struct request_queue *);

--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel

[Index of Archives]     [DM Crypt]     [Fedora Desktop]     [ATA RAID]     [Fedora Marketing]     [Fedora Packaging]     [Fedora SELinux]     [Yosemite Discussion]     [KDE Users]     [Fedora Docs]

  Powered by Linux