This patch updates the hp_sw device handler to properly
check the return codes etc.
And adds the 'correct' machine definitions.
Signed-off-by: Hannes Reinecke <hare@xxxxxxx>
Signed-off-by: Chandra Seetharaman <sekharan@xxxxxxxxxx>
---
drivers/scsi/device_handler/scsi_dh_hp_sw.c | 272 +++++++++++++++++++++++----
1 files changed, 234 insertions(+), 38 deletions(-)
diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
index 78259bc..9c7a1f8 100644
--- a/drivers/scsi/device_handler/scsi_dh_hp_sw.c
+++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
@@ -4,6 +4,7 @@
*
* Copyright (C) 2006 Red Hat, Inc. All rights reserved.
* Copyright (C) 2006 Mike Christie
+ * Copyright (C) 2008 Hannes Reinecke <hare@xxxxxxx>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -25,13 +26,18 @@
#include <scsi/scsi_eh.h>
#include <scsi/scsi_dh.h>
-#define HP_SW_NAME "hp_sw"
+#define HP_SW_NAME "hp_sw"
-#define HP_SW_TIMEOUT (60 * HZ)
-#define HP_SW_RETRIES 3
+#define HP_SW_TIMEOUT (60 * HZ)
+#define HP_SW_RETRIES 3
+
+#define HP_SW_PATH_UNINITIALIZED -1
+#define HP_SW_PATH_ACTIVE 0
+#define HP_SW_PATH_PASSIVE 1
struct hp_sw_dh_data {
unsigned char sense[SCSI_SENSE_BUFFERSIZE];
+ int path_state;
int retries;
};
@@ -42,51 +48,161 @@ static inline struct hp_sw_dh_data *get_hp_sw_data(struct scsi_device *sdev)
return ((struct hp_sw_dh_data *) scsi_dh_data->buf);
}
-static int hp_sw_done(struct scsi_device *sdev)
+/*
+ * tur_done - Handle TEST UNIT READY return status
+ * @sdev: sdev the command has been sent to
+ * @errors: blk error code
+ *
+ * Returns SCSI_DH_DEV_OFFLINED if the sdev is on the passive path
+ */
+static int tur_done(struct scsi_device *sdev, unsigned char *sense)
{
- struct hp_sw_dh_data *h = get_hp_sw_data(sdev);
struct scsi_sense_hdr sshdr;
- int rc;
-
- sdev_printk(KERN_INFO, sdev, "hp_sw_done\n");
+ int ret;
- rc = scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE, &sshdr);
- if (!rc)
+ ret = scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr);
+ if (!ret) {
+ sdev_printk(KERN_WARNING, sdev,
+ "%s: sending tur failed, no sense available\n",
+ HP_SW_NAME);
+ ret = SCSI_DH_IO;
goto done;
+ }
switch (sshdr.sense_key) {
+ case UNIT_ATTENTION:
+ ret = SCSI_DH_IMM_RETRY;
+ break;
case NOT_READY:
- if ((sshdr.asc == 0x04) && (sshdr.ascq == 3)) {
- rc = SCSI_DH_RETRY;
- h->retries++;
+ if ((sshdr.asc == 0x04) && (sshdr.ascq == 2)) {
+ /*
+ * LUN not ready - Initialization command required
+ *
+ * This is the passive path
+ */
+ ret = SCSI_DH_DEV_OFFLINED;
break;
}
- /* fall through */
+ /* Fallthrough */
default:
- h->retries++;
- rc = SCSI_DH_IMM_RETRY;
+ sdev_printk(KERN_WARNING, sdev,
+ "%s: sending tur failed, sense %x/%x/%x\n",
+ HP_SW_NAME, sshdr.sense_key, sshdr.asc,
+ sshdr.ascq);
+ break;
}
done:
- if (rc == SCSI_DH_OK || rc == SCSI_DH_IO)
- h->retries = 0;
- else if (h->retries > HP_SW_RETRIES) {
- h->retries = 0;
+ return ret;
+}
+
+/*
+ * hp_sw_tur - Send TEST UNIT READY
+ * @sdev: sdev command should be sent to
+ *
+ * Use the TEST UNIT READY command to determine
+ * the path state.
+ */
+static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h)
+{
+ struct request *req;
+ int ret;
+
+ req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO);
+ if (!req)
+ return SCSI_DH_RES_TEMP_UNAVAIL;
+
+ req->cmd_type = REQ_TYPE_BLOCK_PC;
+ req->cmd_flags |= REQ_FAILFAST;
+ req->cmd_len = COMMAND_SIZE(TEST_UNIT_READY);
+ memset(req->cmd, 0, MAX_COMMAND_SIZE);
+ req->cmd[0] = TEST_UNIT_READY;
+ req->timeout = HP_SW_TIMEOUT;
+ req->sense = h->sense;
+ memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE);
+ req->sense_len = 0;
+
+retry:
+ ret = blk_execute_rq(req->q, NULL, req, 1);
+ if (ret == -EIO) {
+ if (req->sense_len > 0) {
+ ret = tur_done(sdev, h->sense);
+ } else {
+ sdev_printk(KERN_WARNING, sdev,
+ "%s: sending tur failed with %x\n",
+ HP_SW_NAME, req->errors);
+ ret = SCSI_DH_IO;
+ }
+ } else {
+ h->path_state = HP_SW_PATH_ACTIVE;
+ ret = SCSI_DH_OK;
+ }
+ if (ret == SCSI_DH_IMM_RETRY)
+ goto retry;
+ if (ret == SCSI_DH_DEV_OFFLINED) {
+ h->path_state = HP_SW_PATH_PASSIVE;
+ ret = SCSI_DH_OK;
+ }
+
+ blk_put_request(req);
+
+ return ret;
+}
+
+/*
+ * start_done - Handle START STOP UNIT return status
+ * @sdev: sdev the command has been sent to
+ * @errors: blk error code
+ */
+static int start_done(struct scsi_device *sdev, unsigned char *sense)
+{
+ struct scsi_sense_hdr sshdr;
+ int rc;
+
+ rc = scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr);
+ if (!rc) {
+ sdev_printk(KERN_WARNING, sdev,
+ "%s: sending start_stop_unit failed, "
+ "no sense available\n",
+ HP_SW_NAME);
+ return SCSI_DH_IO;
+ }
+ switch (sshdr.sense_key) {
+ case NOT_READY:
+ if ((sshdr.asc == 0x04) && (sshdr.ascq == 3)) {
+ /*
+ * LUN not ready - manual intervention required
+ *
+ * Switch-over in progress, retry.
+ */
+ rc = SCSI_DH_RETRY;
+ break;
+ }
+ /* fall through */
+ default:
+ sdev_printk(KERN_WARNING, sdev,
+ "%s: sending start_stop_unit failed, sense %x/%x/%x\n",
+ HP_SW_NAME, sshdr.sense_key, sshdr.asc,
+ sshdr.ascq);
rc = SCSI_DH_IO;
}
+
return rc;
}
-static int hp_sw_activate(struct scsi_device *sdev)
+/*
+ * hp_sw_start_stop - Send START STOP UNIT command
+ * @sdev: sdev command should be sent to
+ *
+ * Sending START STOP UNIT activates the SP.
+ */
+static int hp_sw_start_stop(struct scsi_device *sdev, struct hp_sw_dh_data *h)
{
- struct hp_sw_dh_data *h = get_hp_sw_data(sdev);
struct request *req;
- int ret = SCSI_DH_RES_TEMP_UNAVAIL;
+ int ret, retry;
- req = blk_get_request(sdev->request_queue, WRITE, GFP_ATOMIC);
+ req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO);
if (!req)
- goto done;
-
- sdev_printk(KERN_INFO, sdev, "sending START_STOP.");
+ return SCSI_DH_RES_TEMP_UNAVAIL;
req->cmd_type = REQ_TYPE_BLOCK_PC;
req->cmd_flags |= REQ_FAILFAST;
@@ -98,19 +214,78 @@ static int hp_sw_activate(struct scsi_device *sdev)
req->sense = h->sense;
memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE);
req->sense_len = 0;
+ retry = h->retries;
+retry:
ret = blk_execute_rq(req->q, NULL, req, 1);
- if (!ret) /* SUCCESS */
- ret = hp_sw_done(sdev);
- else
+ if (ret == -EIO) {
+ if (req->sense_len > 0) {
+ ret = start_done(sdev, h->sense);
+ } else {
+ sdev_printk(KERN_WARNING, sdev,
+ "%s: sending start_stop_unit failed with %x\n",
+ HP_SW_NAME, req->errors);
+ ret = SCSI_DH_IO;
+ }
+ } else
+ ret = SCSI_DH_OK;
+
+ if (ret == SCSI_DH_RETRY) {
+ if (--retry)
+ goto retry;
ret = SCSI_DH_IO;
-done:
+ }
+
+ blk_put_request(req);
+
+ return ret;
+}
+
+static int hp_sw_prep_fn(struct scsi_device *sdev, struct request *req)
+{
+ struct hp_sw_dh_data *h = get_hp_sw_data(sdev);
+ int ret = BLKPREP_OK;
+
+ if (h->path_state != HP_SW_PATH_ACTIVE) {
+ ret = BLKPREP_KILL;
+ req->cmd_flags |= REQ_QUIET;
+ }
+ return ret;
+
+}
+
+/*
+ * hp_sw_activate - Activate a path
+ * @sdev: sdev on the path to be activated
+ *
+ * The HP Active/Passive firmware is pretty simple;
+ * the passive path reports NOT READY with sense codes
+ * 0x04/0x02; a START STOP UNIT command will then
+ * activate the passive path (and deactivate the
+ * previously active one).
+ */
+static int hp_sw_activate(struct scsi_device *sdev)
+{
+ int ret = SCSI_DH_OK;
+ struct hp_sw_dh_data *h = get_hp_sw_data(sdev);
+
+ ret = hp_sw_tur(sdev, h);
+
+ if (ret == SCSI_DH_OK && h->path_state == HP_SW_PATH_PASSIVE) {
+ ret = hp_sw_start_stop(sdev, h);
+ if (ret == SCSI_DH_OK)
+ sdev_printk(KERN_INFO, sdev,
+ "%s: activated path\n",
+ HP_SW_NAME);
+ }
+
return ret;
}
const struct scsi_dh_devlist hp_sw_dh_data_list[] = {
- {"COMPAQ", "MSA"},
- {"HP", "HSV"},
+ {"COMPAQ", "MSA1000 VOLUME"},
+ {"COMPAQ", "HSV110"},
+ {"HP", "HSV100"},
{"DEC", "HSG80"},
{NULL, NULL},
};
@@ -125,30 +300,51 @@ static struct scsi_device_handler hp_sw_dh = {
.attach = hp_sw_bus_attach,
.detach = hp_sw_bus_detach,
.activate = hp_sw_activate,
+ .prep_fn = hp_sw_prep_fn,
};
static int hp_sw_bus_attach(struct scsi_device *sdev)
{
struct scsi_dh_data *scsi_dh_data;
+ struct hp_sw_dh_data *h;
unsigned long flags;
+ int ret;
scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
+ sizeof(struct hp_sw_dh_data) , GFP_KERNEL);
if (!scsi_dh_data) {
- sdev_printk(KERN_ERR, sdev, "Attach Failed %s.\n",
+ sdev_printk(KERN_ERR, sdev, "%s: Attach Failed\n",
HP_SW_NAME);
return 0;
}
scsi_dh_data->scsi_dh = &hp_sw_dh;
+ h = (struct hp_sw_dh_data *) scsi_dh_data->buf;
+ h->path_state = HP_SW_PATH_UNINITIALIZED;
+ h->retries = HP_SW_RETRIES;
+
+ ret = hp_sw_tur(sdev, h);
+ if (ret != SCSI_DH_OK || h->path_state == HP_SW_PATH_UNINITIALIZED)
+ goto failed;
+
+ if (!try_module_get(THIS_MODULE))
+ goto failed;
+
spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
sdev->scsi_dh_data = scsi_dh_data;
spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
- try_module_get(THIS_MODULE);
- sdev_printk(KERN_NOTICE, sdev, "Attached %s.\n", HP_SW_NAME);
+ sdev_printk(KERN_INFO, sdev, "%s: attached to %s path\n",
+ HP_SW_NAME, h->path_state == HP_SW_PATH_ACTIVE?
+ "active":"passive");
return 0;
+
+failed:
+ kfree(scsi_dh_data);
+ sdev_printk(KERN_ERR, sdev, "%s: not attached\n",
+ HP_SW_NAME);
+ return -EINVAL;
}
static void hp_sw_bus_detach( struct scsi_device *sdev )
@@ -162,7 +358,7 @@ static void hp_sw_bus_detach( struct scsi_device *sdev )
spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
module_put(THIS_MODULE);
- sdev_printk(KERN_NOTICE, sdev, "Detached %s\n", HP_SW_NAME);
+ sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n", HP_SW_NAME);
kfree(scsi_dh_data);
}
@@ -180,6 +376,6 @@ static void __exit hp_sw_exit(void)
module_init(hp_sw_init);
module_exit(hp_sw_exit);
-MODULE_DESCRIPTION("HP MSA 1000");
+MODULE_DESCRIPTION("HP Active/Passive driver");
MODULE_AUTHOR("Mike Christie <michaelc@xxxxxxxxxxx");
MODULE_LICENSE("GPL");
--
1.5.2.4
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
