Subject: scsi_dh: add lsi rdac device handler From: Chandra Seetharaman <sekharan@xxxxxxxxxx> add LSI RDAC SCSI device handler Signed-off-by: Chandra Seetharaman <sekharan@xxxxxxxxxx> --- drivers/scsi/device_handler/Kconfig | 6 6 + 0 - 0 ! drivers/scsi/device_handler/Makefile | 1 1 + 0 - 0 ! drivers/scsi/device_handler/scsi_dh_rdac.c | 660 660 + 0 - 0 ! 3 files changed, 667 insertions(+) Index: linux-2.6.25-rc2-mm1/drivers/scsi/device_handler/Kconfig =================================================================== --- linux-2.6.25-rc2-mm1.orig/drivers/scsi/device_handler/Kconfig +++ linux-2.6.25-rc2-mm1/drivers/scsi/device_handler/Kconfig @@ -10,3 +10,9 @@ menuconfig SCSI_DH SCSI Device Handlers provide device specific support for devices utilized in multipath configurations. Say Y here to select support for specific hardware. + +config SCSI_DH_RDAC + tristate "LSI RDAC Device Handler" + depends on SCSI_DH + help + If you have a LSI RDAC select y. Otherwise, say N. Index: linux-2.6.25-rc2-mm1/drivers/scsi/device_handler/scsi_dh_rdac.c =================================================================== --- /dev/null +++ linux-2.6.25-rc2-mm1/drivers/scsi/device_handler/scsi_dh_rdac.c @@ -0,0 +1,660 @@ +/* + * Engenio/LSI RDAC SCSI Device Handler + * + * Copyright (C) 2005 Mike Christie. All rights reserved. + * Copyright (C) Chandra Seetharaman, IBM Corp. 2007 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ +#include <scsi/scsi.h> +#include <scsi/scsi_eh.h> +#include <scsi/scsi_dh.h> + +#define RDAC_NAME "rdac" + +/* + * LSI mode page stuff + * + * These struct definitions and the forming of the + * mode page were taken from the LSI RDAC 2.4 GPL'd + * driver, and then converted to Linux conventions. + */ +#define RDAC_QUIESCENCE_TIME 20; +/* + * Page Codes + */ +#define RDAC_PAGE_CODE_REDUNDANT_CONTROLLER 0x2c + +/* + * Controller modes definitions + */ +#define RDAC_MODE_TRANSFER_SPECIFIED_LUNS 0x02 + +/* + * RDAC Options field + */ +#define RDAC_FORCED_QUIESENCE 0x02 + +#define RDAC_TIMEOUT (60 * HZ) +#define RDAC_RETRIES 3 + +struct rdac_mode_6_hdr { + u8 data_len; + u8 medium_type; + u8 device_params; + u8 block_desc_len; +}; + +struct rdac_mode_10_hdr { + u16 data_len; + u8 medium_type; + u8 device_params; + u16 reserved; + u16 block_desc_len; +}; + +struct rdac_mode_common { + u8 controller_serial[16]; + u8 alt_controller_serial[16]; + u8 rdac_mode[2]; + u8 alt_rdac_mode[2]; + u8 quiescence_timeout; + u8 rdac_options; +}; + +struct rdac_pg_legacy { + struct rdac_mode_6_hdr hdr; + u8 page_code; + u8 page_len; + struct rdac_mode_common common; +#define MODE6_MAX_LUN 32 + u8 lun_table[MODE6_MAX_LUN]; + u8 reserved2[32]; + u8 reserved3; + u8 reserved4; +}; + +struct rdac_pg_expanded { + struct rdac_mode_10_hdr hdr; + u8 page_code; + u8 subpage_code; + u8 page_len[2]; + struct rdac_mode_common common; + u8 lun_table[256]; + u8 reserved3; + u8 reserved4; +}; + +struct c9_inquiry { + u8 peripheral_info; + u8 page_code; /* 0xC9 */ + u8 reserved1; + u8 page_len; + u8 page_id[4]; /* "vace" */ + u8 avte_cvp; + u8 path_prio; + u8 reserved2[38]; +}; + +#define SUBSYS_ID_LEN 16 +#define SLOT_ID_LEN 2 + +struct c4_inquiry { + u8 peripheral_info; + u8 page_code; /* 0xC4 */ + u8 reserved1; + u8 page_len; + u8 page_id[4]; /* "subs" */ + u8 subsys_id[SUBSYS_ID_LEN]; + u8 revision[4]; + u8 slot_id[SLOT_ID_LEN]; + u8 reserved[2]; +}; + +struct rdac_controller { + u8 subsys_id[SUBSYS_ID_LEN]; + u8 slot_id[SLOT_ID_LEN]; + int use_ms10; + struct kref kref; + struct list_head node; /* list of all controllers */ + union { + struct rdac_pg_legacy legacy; + struct rdac_pg_expanded expanded; + } mode_select; +}; +struct c8_inquiry { + u8 peripheral_info; + u8 page_code; /* 0xC8 */ + u8 reserved1; + u8 page_len; + u8 page_id[4]; /* "edid" */ + u8 reserved2[3]; + u8 vol_uniq_id_len; + u8 vol_uniq_id[16]; + u8 vol_user_label_len; + u8 vol_user_label[60]; + u8 array_uniq_id_len; + u8 array_unique_id[16]; + u8 array_user_label_len; + u8 array_user_label[60]; + u8 lun[8]; +}; + +struct c2_inquiry { + u8 peripheral_info; + u8 page_code; /* 0xC2 */ + u8 reserved1; + u8 page_len; + u8 page_id[4]; /* "swr4" */ + u8 sw_version[3]; + u8 sw_date[3]; + u8 features_enabled; + u8 max_lun_supported; + u8 partitions[239]; /* Total allocation length should be 0xFF */ +}; + +struct rdac_dh_data { + struct rdac_controller *ctlr; +#define UNINITIALIZED_LUN (1 << 8) + unsigned lun; +#define RDAC_STATE_ACTIVE 0 +#define RDAC_STATE_PASSIVE 1 + unsigned char state; + unsigned char sense[SCSI_SENSE_BUFFERSIZE]; + union { + struct c2_inquiry c2; + struct c4_inquiry c4; + struct c8_inquiry c8; + struct c9_inquiry c9; + } inq; +}; + +static LIST_HEAD(ctlr_list); +static DEFINE_SPINLOCK(list_lock); + +static struct request *get_rdac_req(struct scsi_device *sdev, + void *buffer, unsigned buflen, int rw) +{ + struct request *rq; + struct request_queue *q = sdev->request_queue; + struct rdac_dh_data *h = sdev->sdev_dh_data; + + rq = blk_get_request(q, rw, GFP_KERNEL); + + if (!rq) { + sdev_printk(KERN_INFO, sdev, + "get_rdac_req: blk_get_request failed.\n"); + return NULL; + } + + if (buflen && blk_rq_map_kern(q, rq, buffer, buflen, GFP_KERNEL)) { + blk_put_request(rq); + sdev_printk(KERN_INFO, sdev, + "get_rdac_req: blk_rq_map_kern failed.\n"); + return NULL; + } + + memset(&rq->cmd, 0, BLK_MAX_CDB); + rq->sense = h->sense; + memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE); + rq->sense_len = 0; + + rq->cmd_type = REQ_TYPE_BLOCK_PC; + rq->cmd_flags |= REQ_FAILFAST | REQ_NOMERGE; + rq->retries = RDAC_RETRIES; + rq->timeout = RDAC_TIMEOUT; + + return rq; +} + +static struct request *rdac_failover_get(struct scsi_device *sdev) +{ + struct request *rq; + struct rdac_mode_common *common; + unsigned data_size; + struct rdac_dh_data *h = sdev->sdev_dh_data; + + if (h->ctlr->use_ms10) { + struct rdac_pg_expanded *rdac_pg; + + data_size = sizeof(struct rdac_pg_expanded); + rdac_pg = &h->ctlr->mode_select.expanded; + memset(rdac_pg, 0, data_size); + common = &rdac_pg->common; + rdac_pg->page_code = RDAC_PAGE_CODE_REDUNDANT_CONTROLLER + 0x40; + rdac_pg->subpage_code = 0x1; + rdac_pg->page_len[0] = 0x01; + rdac_pg->page_len[1] = 0x28; + rdac_pg->lun_table[h->lun] = 0x81; + } else { + struct rdac_pg_legacy *rdac_pg; + + data_size = sizeof(struct rdac_pg_legacy); + rdac_pg = &h->ctlr->mode_select.legacy; + memset(rdac_pg, 0, data_size); + common = &rdac_pg->common; + rdac_pg->page_code = RDAC_PAGE_CODE_REDUNDANT_CONTROLLER; + rdac_pg->page_len = 0x68; + rdac_pg->lun_table[h->lun] = 0x81; + } + common->rdac_mode[1] = RDAC_MODE_TRANSFER_SPECIFIED_LUNS; + common->quiescence_timeout = RDAC_QUIESCENCE_TIME; + common->rdac_options = RDAC_FORCED_QUIESENCE; + + /* get request for block layer packet command */ + rq = get_rdac_req(sdev, &h->ctlr->mode_select, data_size, WRITE); + if (!rq) + return NULL; + + /* Prepare the command. */ + if (h->ctlr->use_ms10) { + rq->cmd[0] = MODE_SELECT_10; + rq->cmd[7] = data_size >> 8; + rq->cmd[8] = data_size & 0xff; + } else { + rq->cmd[0] = MODE_SELECT; + rq->cmd[4] = data_size; + } + rq->cmd_len = COMMAND_SIZE(rq->cmd[0]); + + return rq; +} + +static void release_controller(struct kref *kref) +{ + struct rdac_controller *ctlr; + ctlr = container_of(kref, struct rdac_controller, kref); + + spin_lock(&list_lock); + list_del(&ctlr->node); + spin_unlock(&list_lock); + kfree(ctlr); +} + +static struct rdac_controller *get_controller(u8 *subsys_id, u8 *slot_id) +{ + struct rdac_controller *ctlr, *tmp; + + spin_lock(&list_lock); + + list_for_each_entry(tmp, &ctlr_list, node) { + if ((memcmp(tmp->subsys_id, subsys_id, SUBSYS_ID_LEN) == 0) && + (memcmp(tmp->slot_id, slot_id, SLOT_ID_LEN) == 0)) { + kref_get(&tmp->kref); + spin_unlock(&list_lock); + return tmp; + } + } + ctlr = kmalloc(sizeof(*ctlr), GFP_ATOMIC); + if (!ctlr) + goto done; + + /* initialize fields of controller */ + memcpy(ctlr->subsys_id, subsys_id, SUBSYS_ID_LEN); + memcpy(ctlr->slot_id, slot_id, SLOT_ID_LEN); + kref_init(&ctlr->kref); + ctlr->use_ms10 = -1; + list_add(&ctlr->node, &ctlr_list); +done: + spin_unlock(&list_lock); + return ctlr; +} + +static int submit_inquiry(struct scsi_device *sdev, int page_code, + unsigned int len) +{ + struct request *rq; + struct request_queue *q = sdev->request_queue; + struct rdac_dh_data *h = sdev->sdev_dh_data; + int err = SCSI_DH_RES_TEMP_UNAVAIL; + + rq = get_rdac_req(sdev, &h->inq, len, READ); + if (!rq) + goto done; + + /* Prepare the command. */ + rq->cmd[0] = INQUIRY; + rq->cmd[1] = 1; + rq->cmd[2] = page_code; + rq->cmd[4] = len; + rq->cmd_len = COMMAND_SIZE(INQUIRY); + err = blk_execute_rq(q, NULL, rq, 1); + if (err == -EIO) + err = SCSI_DH_IO; +done: + return err; +} + +static int get_lun(struct scsi_device *sdev) +{ + int err; + struct c8_inquiry *inqp; + struct rdac_dh_data *h = sdev->sdev_dh_data; + + err = submit_inquiry(sdev, 0xC8, sizeof(struct c8_inquiry)); + if (err == SCSI_DH_OK) { + inqp = &h->inq.c8; + h->lun = inqp->lun[7]; /* currently it uses only one byte */ + } + return err; +} + +#define RDAC_OWNED 0 +#define RDAC_UNOWNED 1 +#define RDAC_FAILED 2 +static int check_ownership(struct scsi_device *sdev) +{ + int err; + struct c9_inquiry *inqp; + struct rdac_dh_data *h = sdev->sdev_dh_data; + + err = submit_inquiry(sdev, 0xC9, sizeof(struct c9_inquiry)); + if (err == SCSI_DH_OK) { + err = RDAC_UNOWNED; + inqp = &h->inq.c9; + /* + * If in AVT mode or if the path already owns the LUN, + * return RDAC_OWNED; + */ + if (((inqp->avte_cvp >> 7) == 0x1) || + ((inqp->avte_cvp & 0x1) != 0)) + err = RDAC_OWNED; + } else + err = RDAC_FAILED; + return err; +} + +static int initialize_controller(struct scsi_device *sdev) +{ + int err; + struct c4_inquiry *inqp; + struct rdac_dh_data *h = sdev->sdev_dh_data; + + err = submit_inquiry(sdev, 0xC4, sizeof(struct c4_inquiry)); + if (err == SCSI_DH_OK) { + inqp = &h->inq.c4; + h->ctlr = get_controller(inqp->subsys_id, inqp->slot_id); + if (!h->ctlr) + err = SCSI_DH_RES_TEMP_UNAVAIL; + } + return err; +} + +static int set_mode_select(struct scsi_device *sdev) +{ + int err; + struct c2_inquiry *inqp; + struct rdac_dh_data *h = sdev->sdev_dh_data; + + err = submit_inquiry(sdev, 0xC2, sizeof(struct c2_inquiry)); + if (err == SCSI_DH_OK) { + inqp = &h->inq.c2; + /* + * If more than MODE6_MAX_LUN luns are supported, use + * mode select 10 + */ + if (inqp->max_lun_supported >= MODE6_MAX_LUN) + h->ctlr->use_ms10 = 1; + else + h->ctlr->use_ms10 = 0; + } + return err; +} + +static int mode_select_handle_sense(struct scsi_device *sdev) +{ + struct scsi_sense_hdr sense_hdr; + struct rdac_dh_data *h = sdev->sdev_dh_data; + int sense, err = SCSI_DH_IO, ret; + + ret = scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE, &sense_hdr); + if (!ret) + goto done; + + err = SCSI_DH_OK; + sense = (sense_hdr.sense_key << 16) | (sense_hdr.asc << 8) | + sense_hdr.ascq; + /* If it is retryable failure, submit the c9 inquiry again */ + if (sense == 0x59136 || sense == 0x68b02 || sense == 0xb8b02 || + sense == 0x62900) { + /* 0x59136 - Command lock contention + * 0x[6b]8b02 - Quiesense in progress or achieved + * 0x62900 - Power On, Reset, or Bus Device Reset + */ + err = SCSI_DH_DEV_TEMP_BUSY; + } + + if (sense) + sdev_printk(KERN_INFO, sdev, + "MODE_SELECT failed with sense 0x%x.\n", sense); +done: + return err; +} + +static int send_mode_select(struct scsi_device *sdev) +{ + struct request *rq; + struct request_queue *q = sdev->request_queue; + struct rdac_dh_data *h = sdev->sdev_dh_data; + int err = SCSI_DH_RES_TEMP_UNAVAIL; + + rq = rdac_failover_get(sdev); + if (!rq) + goto done; + + sdev_printk(KERN_INFO, sdev, "queueing MODE_SELECT command.\n"); + + err = blk_execute_rq(q, NULL, rq, 1); + if (err != SCSI_DH_OK) + err = mode_select_handle_sense(sdev); + if (err == SCSI_DH_OK) + h->state = RDAC_STATE_ACTIVE; +done: + return err; +} + +static int rdac_activate(struct scsi_device *sdev) +{ + struct rdac_dh_data *h = sdev->sdev_dh_data; + int err = SCSI_DH_OK; + + if (h->lun == UNINITIALIZED_LUN) { + err = get_lun(sdev); + if (err != SCSI_DH_OK) + goto done; + } + + err = check_ownership(sdev); + switch (err) { + case RDAC_UNOWNED: + break; + case RDAC_OWNED: + err = SCSI_DH_OK; + goto done; + case RDAC_FAILED: + default: + err = SCSI_DH_IO; + goto done; + } + + if (!h->ctlr) { + err = initialize_controller(sdev); + if (err != SCSI_DH_OK) + goto done; + } + + if (h->ctlr->use_ms10 == -1) { + err = set_mode_select(sdev); + if (err != SCSI_DH_OK) + goto done; + } + + err = send_mode_select(sdev); +done: + return err; +} + +static int rdac_prep_fn(struct scsi_device *sdev) +{ + struct rdac_dh_data *h = sdev->sdev_dh_data; + + return (h->state == RDAC_STATE_ACTIVE) ? BLKPREP_OK : BLKPREP_KILL; +} + +static int rdac_check_sense(struct scsi_device *sdev, + struct scsi_sense_hdr *sense_hdr) +{ + struct rdac_dh_data *h = sdev->sdev_dh_data; + switch (sense_hdr->sense_key) { + case NOT_READY: + if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x81) + /* LUN Not Ready - Storage firmware incompatible + * Manual code synchonisation required. + * + * Nothing we can do here. Try to bypass the path. + */ + return SUCCESS; + if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0xA1) + /* LUN Not Ready - Quiescense in progress + * + * Just retry and wait. + */ + return NEEDS_RETRY; + break; + case ILLEGAL_REQUEST: + if (sense_hdr->asc == 0x94 && sense_hdr->ascq == 0x01) + /* Invalid Request - Current Logical Unit Ownership. + * Controller is not the current owner of the LUN, + * Fail the path, so that the other path be used. + */ + h->state = RDAC_STATE_PASSIVE; + break; + case UNIT_ATTENTION: + if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00) + /* + * Power On, Reset, or Bus Device Reset, just retry. + */ + return NEEDS_RETRY; + break; + } + /* success just means we do not care what scsi-ml does */ + return SUCCESS; +} + +static const struct { + char *vendor; + char *model; +} rdac_dev_list[] = { + {"IBM", "1815"}, + {NULL, NULL}, +}; + +static int rdac_bus_notify(struct notifier_block *, unsigned long, void *); + +static struct scsi_device_handler rdac_dh = { + .name = RDAC_NAME, + .module = THIS_MODULE, + .nb.notifier_call = rdac_bus_notify, + .prep_fn = rdac_prep_fn, + .check_sense = rdac_check_sense, + .activate = rdac_activate, +}; + +/* + * TODO: need some interface so we can set trespass values + */ +static int rdac_bus_notify(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct device *dev = data; + struct scsi_device *sdev = to_scsi_device(dev); + struct rdac_dh_data *dh_data; + int i, found = 0; + unsigned long flags; + + if (action == BUS_NOTIFY_ADD_DEVICE) { + for (i = 0; rdac_dev_list[i].vendor; i++) { + if (!strncmp(sdev->vendor, rdac_dev_list[i].vendor, + strlen(rdac_dev_list[i].vendor)) && + !strncmp(sdev->model, rdac_dev_list[i].model, + strlen(rdac_dev_list[i].model))) { + found = 1; + break; + } + } + if (!found) + goto out; + + dh_data = kzalloc(sizeof(*dh_data), GFP_KERNEL); + if (!dh_data) { + sdev_printk(KERN_ERR, sdev, "Attach failed %s.\n", + RDAC_NAME); + goto out; + } + + dh_data->lun = UNINITIALIZED_LUN; + dh_data->state = RDAC_STATE_ACTIVE; + spin_lock_irqsave(sdev->request_queue->queue_lock, flags); + sdev->sdev_dh_data = dh_data; + sdev->sdev_dh = &rdac_dh; + spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags); + try_module_get(THIS_MODULE); + + sdev_printk(KERN_NOTICE, sdev, "Attached %s.\n", RDAC_NAME); + + } else if (action == BUS_NOTIFY_DEL_DEVICE) { + if (sdev->sdev_dh != &rdac_dh) + goto out; + + spin_lock_irqsave(sdev->request_queue->queue_lock, flags); + dh_data = sdev->sdev_dh_data; + sdev->sdev_dh_data = NULL; + sdev->sdev_dh = NULL; + spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags); + + if (dh_data->ctlr) + kref_put(&dh_data->ctlr->kref, release_controller); + kfree(dh_data); + module_put(THIS_MODULE); + sdev_printk(KERN_NOTICE, sdev, "Dettached %s.\n", + RDAC_NAME); + } + +out: + return 0; +} + +static int __init rdac_init(void) +{ + int r; + + r = scsi_register_device_handler(&rdac_dh); + if (r != 0) + printk(KERN_ERR "Failed to register scsi device handler."); + return r; +} + +static void __exit rdac_exit(void) +{ + scsi_unregister_device_handler(&rdac_dh); +} + +module_init(rdac_init); +module_exit(rdac_exit); + +MODULE_DESCRIPTION("Multipath LSI/Engenio RDAC driver"); +MODULE_AUTHOR("Mike Christie, Chandra Seetharaman"); +MODULE_LICENSE("GPL"); Index: linux-2.6.25-rc2-mm1/drivers/scsi/device_handler/Makefile =================================================================== --- linux-2.6.25-rc2-mm1.orig/drivers/scsi/device_handler/Makefile +++ linux-2.6.25-rc2-mm1/drivers/scsi/device_handler/Makefile @@ -2,3 +2,4 @@ # SCSI Device Handler # obj-$(CONFIG_SCSI_DH) += scsi_dh.o +obj-$(CONFIG_SCSI_DH_RDAC) += scsi_dh_rdac.o -- ---------------------------------------------------------------------- Chandra Seetharaman | Be careful what you choose.... - sekharan@xxxxxxxxxx | .......you may get it. ---------------------------------------------------------------------- -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel