On Mon, 2008-02-11 at 12:18 -0700, Matthew Wilcox wrote:
> On Mon, Feb 11, 2008 at 10:27:46AM -0800, Chandra Seetharaman wrote:
> > On Sat, 2008-02-09 at 05:45 -0700, Matthew Wilcox wrote:
> > > On Mon, Feb 04, 2008 at 01:19:30PM -0800, Chandra Seetharaman wrote:
> > > > The device does send these error messages currently, but it takes some
> > > > time to get the check condition back, which adds up the time to boot
> > > > especially when the # of LUNS is huge.
> > > >
> > > > For example, in my test configuration, I had 40 luns, and the time
> > > > difference (with this patch and without it) to boot is 171 seconds and
> > > > 1426 seconds.
> > >
> > > Was that with sync or async SCSI bus scanning?
> >
> > I didn't change anything, IOW, i did default scanning, which I would
> > guess sync ?!
>
> That would depend on your CONFIG_SCSI_SCAN_ASYNC setting.
>
> Try booting with 'scsi_mod.scan=async' and without this patch, and see
> how long it takes.
Hi Matthew,
scanning in async mode did not help in reducing the boot time.
I even changed the configuration, such that 20 active luns and 20
passive luns are in each path, it still didn't change the time it took
to reboot.
regards,
chandra
>
--
----------------------------------------------------------------------
Chandra Seetharaman | Be careful what you choose....
- sekharan@xxxxxxxxxx | .......you may get it.
----------------------------------------------------------------------
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
