I never saw any response on this, though a side comment on my other
thread did get one query that I tried to direct to here, so I figured
I'd repost and see if anyone had any ideas.
Re-attaching the original docs as well.
Thanks in advance,
Rick
-----Original Message-----
From: dm-devel-bounces@xxxxxxxxxx [mailto:dm-devel-bounces@xxxxxxxxxx]
On Behalf Of Greene, Rick
Sent: Thursday, January 31, 2008 3:20 PM
To: device-mapper development
Subject: Multipath not rebuilding correctly on reboot
Now that I seem to have multipath and my XP 1024 working together, I've
found a new issue. Someone recently had a similar thread going, but I
saw no ultimate resolution.
My problem is that when I reboot my server, the multipath configuration
is not coming back the way it was before. I moved the two external
tools I use to find the UID into /etc (they had bin in /usr/bin and
/sbin), updated the multipath.conf file (and one of the scripts) to
reflect this, but odd things are still happening.
Attached is initial_view.txt, which shows what multipath is coming up
with when I do the commands shown (the bulk of the file is multipath -v3
output, but at the bottom of the file is a multipath -ll output as
well). It (seems to) correctly shows that I have 4 disks, each visible
via two separate paths.
After I reboot, however, I get different results. Once it showed 4
paths for mpath0, and 2 paths for mpath1, 2, and 3. Next time it
correctly showed mpath0, mpath1, and mpath3, but didn't show mpath2 at
all. On the next attempt I got everything correct, and the very next
one only showed mpath0 and mpath1.
The post_reboot.txt file shows the contents of the /var/log/boot.log
file and the output of the dmesg command, along with the "multipath -ll"
view from the most recent reboot.
I then manually did a "multipath -v2" and the missing two paths then
came back. The file manual_run.txt shows those results plus the updated
"multipath -ll".
Do I need to just make my own /etc/init.d script to do a "multipath -v2"
at the end of booting to make sure it all gets covered, along with the
requisite LVM & mount commands to get the VG that is on these disks
working right?
Thanks in advance,
Rick
# multipath -v2
create: mpath2 (00040026_05:85)
[size=13 GB][features="0"][hwhandler="0"]
\_ round-robin 0
\_ 1:0:0:2 sdc 8:32 [ready]
\_ 2:0:0:2 sdg 8:96 [ready]
create: mpath3 (00040026_05:86)
[size=13 GB][features="0"][hwhandler="0"]
\_ round-robin 0
\_ 1:0:0:3 sdd 8:48 [ready]
\_ 2:0:0:3 sdh 8:112 [ready]
[root@corux38 ~]# multipath -ll
mpath2 (00040026_05:85)
[size=13 GB][features="0"][hwhandler="0"]
\_ round-robin 0 [active]
\_ 1:0:0:2 sdc 8:32 [active][ready]
\_ 2:0:0:2 sdg 8:96 [active][ready]
mpath1 (00040026_05:84)
[size=13 GB][features="0"][hwhandler="0"]
\_ round-robin 0 [enabled]
\_ 2:0:0:1 sdf 8:80 [active][ready]
\_ 1:0:0:1 sdb 8:16 [active][ready]
mpath0 (00040026_05:83)
[size=13 GB][features="0"][hwhandler="0"]
\_ round-robin 0 [enabled]
\_ 2:0:0:0 sde 8:64 [active][ready]
\_ 1:0:0:0 sda 8:0 [active][ready]
mpath3 (00040026_05:86)
[size=13 GB][features="0"][hwhandler="0"]
\_ round-robin 0 [active]
\_ 1:0:0:3 sdd 8:48 [active][ready]
\_ 2:0:0:3 sdh 8:112 [active][ready]
# dmesg
Bootdata ok (command line is ro root=/dev/vg00/root rhgb quiet)
Linux version 2.6.9-55.ELsmp (brewbuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Fri Apr 20 16:36:54 EDT 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bfff3000 (usable)
BIOS-e820: 00000000bfff3000 - 00000000bfffb000 (ACPI data)
BIOS-e820: 00000000bfffb000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
ACPI: RSDP (v002 HP ) @ 0x00000000000f4f00
ACPI: XSDT (v001 HP P51 0x00000002 Ò 0x0000162e) @ 0x00000000bfff3300
ACPI: FADT (v003 HP P51 0x00000002 Ò 0x0000162e) @ 0x00000000bfff3380
ACPI: SPCR (v001 HP SPCRRBSU 0x00000001 Ò 0x0000162e) @ 0x00000000bfff3140
ACPI: MCFG (v001 HP ProLiant 0x00000001 0x00000000) @ 0x00000000bfff31c0
ACPI: MADT (v001 HP 00000083 0x00000002 0x00000000) @ 0x00000000bfff3200
ACPI: SSDT (v001 HP SSDTP 0x00000001 INTL 0x20030228) @ 0x00000000bfff8000
ACPI: DSDT (v001 HP DSDT 0x00000001 INTL 0x20030228) @ 0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-00000000bfff3000
Bootmem setup node 0 0000000000000000-00000000bfff3000
On node 0 totalpages: 786419
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 782323 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
Processor #6 15:4 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
Processor #7 15:4 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
Setting APIC routing to flat
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec80400] gsi_base[48])
IOAPIC[2]: apic_id 10, version 32, address 0xfec80400, GSI 48-71
ACPI: IOAPIC (id[0x0b] address[0xfec84000] gsi_base[72])
IOAPIC[3]: apic_id 11, version 32, address 0xfec84000, GSI 72-95
ACPI: IOAPIC (id[0x0c] address[0xfec84400] gsi_base[96])
IOAPIC[4]: apic_id 12, version 32, address 0xfec84400, GSI 96-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
Checking aperture...
Built 1 zonelists
Kernel command line: ro root=/dev/vg00/root rhgb quiet console=tty0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 3.579545 MHz PM timer.
time.c: Detected 3400.312 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Memory: 3089236k/3145676k available (2112k kernel code, 0k reserved, 1305k data, 208k init)
Calibrating delay using timer specific routine.. 6807.48 BogoMIPS (lpj=3403744)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
using mwait in idle threads.
CPU0: Initial APIC ID: 0, Physical Processor ID: 0
Using IO APIC NMI watchdog
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU0: Initial APIC ID: 0, Physical Processor ID: 0
CPU0: Intel(R) Xeon(TM) CPU 3.40GHz stepping 01
per-CPU timeslice cutoff: 1023.90 usecs.
task migration cache decay timeout: 1 msecs.
Booting processor 1/6 rip 6000 rsp 10037e05f58
Initializing CPU#1
Calibrating delay using timer specific routine.. 6799.32 BogoMIPS (lpj=3399660)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU1: Initial APIC ID: 6, Physical Processor ID: 3
Intel(R) Xeon(TM) CPU 3.40GHz stepping 01
Booting processor 2/1 rip 6000 rsp 10037e3df58
Initializing CPU#2
Calibrating delay using timer specific routine.. 6799.31 BogoMIPS (lpj=3399655)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU2: Initial APIC ID: 1, Physical Processor ID: 0
Intel(R) Xeon(TM) CPU 3.40GHz stepping 01
Booting processor 3/7 rip 6000 rsp 100016f3f58
Initializing CPU#3
Calibrating delay using timer specific routine.. 6799.18 BogoMIPS (lpj=3399591)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU3: Initial APIC ID: 7, Physical Processor ID: 3
Intel(R) Xeon(TM) CPU 3.40GHz stepping 01
Total of 4 processors activated (27205.30 BogoMIPS).
activating NMI Watchdog ... done.
testing NMI watchdog ... OK.
Using local APIC timer interrupts.
Detected 12.501 MHz APIC timer.
checking TSC synchronization across 4 CPUs: passed.
Brought up 4 CPUs
time.c: Using PIT/TSC based timekeeping.
checking if image is initramfs... it is
NET: Registered protocol family 16
PCI: Using configuration type 1
PCI: Using MMCONFIG at e0000000
mtrr: v2.0 (20020519)
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0.PCXA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0.PCXB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0.PCXC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0.PCXD._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7 10 11)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
GSI 18 sharing vector 0xB9 and IRQ 18
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169
GSI 19 sharing vector 0xC1 and IRQ 19
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:00:1f.1[A]: no GSI
GSI 20 sharing vector 0xC9 and IRQ 20
ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 25 (level, low) -> IRQ 201
GSI 21 sharing vector 0xD1 and IRQ 21
ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 26 (level, low) -> IRQ 209
GSI 22 sharing vector 0xD9 and IRQ 22
ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 51 (level, low) -> IRQ 217
GSI 23 sharing vector 0xE1 and IRQ 23
ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 78 (level, low) -> IRQ 225
GSI 24 sharing vector 0xE9 and IRQ 24
ACPI: PCI Interrupt 0000:07:04.0[A] -> GSI 74 (level, low) -> IRQ 233
GSI 25 sharing vector 0x32 and IRQ 25
ACPI: PCI Interrupt 0000:07:05.0[A] -> GSI 73 (level, low) -> IRQ 50
GSI 26 sharing vector 0x3A and IRQ 26
ACPI: PCI Interrupt 0000:0a:01.0[A] -> GSI 97 (level, low) -> IRQ 58
GSI 27 sharing vector 0x42 and IRQ 27
ACPI: PCI Interrupt 0000:0a:01.1[B] -> GSI 98 (level, low) -> IRQ 66
GSI 28 sharing vector 0x4A and IRQ 28
ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 21 (level, low) -> IRQ 74
GSI 29 sharing vector 0x52 and IRQ 29
ACPI: PCI Interrupt 0000:01:04.2[B] -> GSI 22 (level, low) -> IRQ 82
PCI-DMA: Disabling IOMMU.
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1201791896.599:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key B7CA3C9BE2FAFC39
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
ACPI: Processor [CPU2] (supports C1)
ACPI: Processor [CPU3] (supports C1)
ACPI: Thermal Zone [THM0] (8 C)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI interrupt 0000:00:1f.1[A]: no GSI
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x0500-0x0507, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x0508-0x050f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: DV-28E-N, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS/2 Generic Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 262144 (order: 10, 4194304 bytes)
TCP: Hash tables configured (established 262144 bind 262144)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
cpufreq: CPU0 - ACPI performance management activated.
cpufreq: *P0: 3400 MHz, 103000 mW, 100 uS
cpufreq: P1: 2800 MHz, 77469 mW, 100 uS
cpufreq: CPU1 - ACPI performance management activated.
cpufreq: *P0: 3400 MHz, 103000 mW, 100 uS
cpufreq: P1: 2800 MHz, 77469 mW, 100 uS
cpufreq: CPU2 - ACPI performance management activated.
cpufreq: *P0: 3400 MHz, 103000 mW, 100 uS
cpufreq: P1: 2800 MHz, 77469 mW, 100 uS
cpufreq: CPU3 - ACPI performance management activated.
cpufreq: *P0: 3400 MHz, 103000 mW, 100 uS
cpufreq: P1: 2800 MHz, 77469 mW, 100 uS
ACPI wakeup devices:
ACPI: (supports S0 S4 S5)
Freeing unused kernel memory: 208k freed
SCSI subsystem initialized
HP CISS Driver (v 2.6.14.RH2)
cciss: Device 0x46 has been found at bus 4 dev 3 func 0
ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 51 (level, low) -> IRQ 217
cciss: using DAC cycles
blocks= 71122559 block_size= 512
heads= 255, sectors= 32, cylinders= 8716
blocks= 71122559 block_size= 512
heads= 255, sectors= 32, cylinders= 8716
blocks= 71122559 block_size= 512
heads= 255, sectors= 32, cylinders= 8716
cciss/c0d0: p1 p2
blocks= 71122559 block_size= 512
heads= 255, sectors= 32, cylinders= 8716
cciss/c0d1: unknown partition table
device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@xxxxxxxxxx
hda: packet command error: status=0x51 { DriveReady SeekComplete Error }
hda: packet command error: error=0x50
ide: failed opcode was 100
cdrom: open failed.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 4 roles, 355 types, 26 bools
security: 55 classes, 22610 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
libata version 2.00 loaded.
Emulex LightPulse Fibre Channel SCSI driver 8.0.16.27
Copyright(c) 2003-2006 Emulex. All rights reserved.
ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 78 (level, low) -> IRQ 225
lpfc 0000:06:02.0: 0:1303 Link Up Event x1 received Data: x1 xf7 x8 x0
scsi0 : Emulex LP9002L-F2 2Gb PCI Fibre Channel Adapter on PCI bus 06 device 10 irq 225
ACPI: PCI Interrupt 0000:07:04.0[A] -> GSI 74 (level, low) -> IRQ 233
lpfc 0000:07:04.0: 1:1303 Link Up Event x1 received Data: x1 xf7 x8 x0
scsi1 : Emulex LP9002 2Gb PCI Fibre Channel Adapter on PCI bus 07 device 20 irq 233
Vendor: HP Model: OPEN-E Rev: 2114
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 28452960 512-byte hdwr sectors (14568 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 28452960 512-byte hdwr sectors (14568 MB)
SCSI device sda: drive cache: write back
sda: sda1
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
Vendor: HP Model: OPEN-E Rev: 2114
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdb: 28452960 512-byte hdwr sectors (14568 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 28452960 512-byte hdwr sectors (14568 MB)
SCSI device sdb: drive cache: write back
sdb: unknown partition table
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 1
Vendor: HP Model: OPEN-E Rev: 2114
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdc: 28452960 512-byte hdwr sectors (14568 MB)
SCSI device sdc: drive cache: write back
SCSI device sdc: 28452960 512-byte hdwr sectors (14568 MB)
SCSI device sdc: drive cache: write back
sdc: unknown partition table
Attached scsi disk sdc at scsi1, channel 0, id 0, lun 2
Vendor: HP Model: OPEN-E Rev: 2114
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdd: 28452960 512-byte hdwr sectors (14568 MB)
SCSI device sdd: drive cache: write back
SCSI device sdd: 28452960 512-byte hdwr sectors (14568 MB)
SCSI device sdd: drive cache: write back
sdd: unknown partition table
Attached scsi disk sdd at scsi1, channel 0, id 0, lun 3
ACPI: PCI Interrupt 0000:07:05.0[A] -> GSI 73 (level, low) -> IRQ 50
Losing some ticks... checking if CPU frequency changed.
lpfc 0000:07:05.0: 2:1303 Link Up Event x1 received Data: x1 xf7 x8 x0
scsi2 : Emulex LP9002 2Gb PCI Fibre Channel Adapter on PCI bus 07 device 28 irq 50
Vendor: HP Model: OPEN-E Rev: 2114
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sde: 28452960 512-byte hdwr sectors (14568 MB)
SCSI device sde: drive cache: write back
SCSI device sde: 28452960 512-byte hdwr sectors (14568 MB)
SCSI device sde: drive cache: write back
sde: sde1
Attached scsi disk sde at scsi2, channel 0, id 0, lun 0
Vendor: HP Model: OPEN-E Rev: 2114
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdf: 28452960 512-byte hdwr sectors (14568 MB)
SCSI device sdf: drive cache: write back
SCSI device sdf: 28452960 512-byte hdwr sectors (14568 MB)
SCSI device sdf: drive cache: write back
sdf: unknown partition table
Attached scsi disk sdf at scsi2, channel 0, id 0, lun 1
Vendor: HP Model: OPEN-E Rev: 2114
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdg: 28452960 512-byte hdwr sectors (14568 MB)
SCSI device sdg: drive cache: write back
SCSI device sdg: 28452960 512-byte hdwr sectors (14568 MB)
SCSI device sdg: drive cache: write back
sdg: unknown partition table
Attached scsi disk sdg at scsi2, channel 0, id 0, lun 2
Vendor: HP Model: OPEN-E Rev: 2114
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdh: 28452960 512-byte hdwr sectors (14568 MB)
SCSI device sdh: drive cache: write back
SCSI device sdh: 28452960 512-byte hdwr sectors (14568 MB)
SCSI device sdh: drive cache: write back
sdh: unknown partition table
Attached scsi disk sdh at scsi2, channel 0, id 0, lun 3
inserting floppy driver for 2.6.9-55.ELsmp
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Intel(R) PRO/1000 Network Driver - version 7.2.7-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0000:0a:01.0[A] -> GSI 97 (level, low) -> IRQ 58
e1000: 0000:0a:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:11:0a:64:7e:da
divert: allocating divert_blk for eth0
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:0a:01.1[B] -> GSI 98 (level, low) -> IRQ 66
e1000: 0000:0a:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:11:0a:64:7e:db
divert: allocating divert_blk for eth1
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
tg3.c:v3.64-rh (July 31, 2006)
ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 25 (level, low) -> IRQ 201
divert: allocating divert_blk for eth2
eth2: Tigon3 [partno(N/A) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:14:38:bf:5a:51
eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[0]
eth2: dma_rwctrl[769f4000] dma_mask[64-bit]
ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 26 (level, low) -> IRQ 209
divert: allocating divert_blk for eth3
eth3: Tigon3 [partno(N/A) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:14:38:bf:5a:50
eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth3: dma_rwctrl[769f4000] dma_mask[64-bit]
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
hw_random hardware driver 1.0.0 loaded
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 193, pci mem ffffff0010086000
SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 169, io base 0000000000002000
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 177, io base 0000000000002020
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 185, io base 0000000000002040
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169
uhci_hcd 0000:00:1d.3: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: irq 169, io base 0000000000002060
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ACPI: Power Button (FF) [PWRF]
EXT3 FS on dm-0, internal journal
device-mapper: dm-multipath version 1.0.5 loaded
device-mapper: dm-round-robin version 1.0.0 loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on cciss/c0d0p1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev cciss/c0d0p1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-1, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-2, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-3, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-4, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-5, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-6, type ext3), uses xattr
Adding 2097144k swap on /dev/vg00/swap1. Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
IA-32 Microcode Update Driver: v1.14 <tigran@xxxxxxxxxxx>
microcode: CPU0 already at revision 0x12 (current=0x12)
microcode: CPU1 already at revision 0x12 (current=0x12)
microcode: CPU2 already at revision 0x12 (current=0x12)
microcode: CPU3 already at revision 0x12 (current=0x12)
microcode: No new microdata for cpu 1
microcode: No new microdata for cpu 2
microcode: No new microdata for cpu 0
microcode: No new microdata for cpu 3
IA-32 Microcode Update Driver v1.14 unregistered
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (8192 buckets, 65536 max) - 456 bytes per conntrack
e1000: eth1: e1000_watchdog_task: NIC Link is Up 100 Mbps Half Duplex
i2c /dev entries driver
NET: Registered protocol family 10
Disabled Privacy Extensions on device ffffffff80408540(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
eth1: no IPv6 routers present
# cat /var/log/boot.log
Jan 31 15:02:31 corux38 syslog: syslogd startup succeeded
Jan 31 15:02:31 corux38 syslog: klogd startup succeeded
Jan 31 15:02:31 corux38 irqbalance: irqbalance startup succeeded
Jan 31 15:02:31 corux38 multipathd: multipathd startup succeeded
Jan 31 15:02:31 corux38 portmap: portmap startup succeeded
Jan 31 15:02:32 corux38 rc: Starting lm_sensors: succeeded
Jan 31 15:02:32 corux38 xinetd: xinetd startup succeeded
Jan 31 15:02:32 corux38 ntpd: ntpd startup succeeded
Jan 31 15:02:32 corux38 vsftpd: vsftpd vsftpd succeeded
Jan 31 15:02:33 corux38 ssh-server-g3: Starting ssh-server-g3
Jan 31 10:01:59 corux38 rc.sysinit: -e
Jan 31 10:02:01 corux38 start_udev: Starting udev: succeeded
Jan 31 10:02:25 corux38 rc.sysinit: -e
Jan 31 10:02:25 corux38 sysctl: net.ipv4.ip_forward = 0
Jan 31 10:02:25 corux38 sysctl: net.ipv4.conf.default.rp_filter = 1
Jan 31 10:02:25 corux38 sysctl: net.ipv4.conf.default.accept_source_route = 0
Jan 31 10:02:25 corux38 sysctl: kernel.sysrq = 0
Jan 31 10:02:25 corux38 sysctl: kernel.core_uses_pid = 1
Jan 31 10:02:25 corux38 sysctl: net.ipv4.conf.all.accept_source_route = 0
Jan 31 10:02:25 corux38 sysctl: net.ipv4.tcp_max_syn_backlog = 4096
Jan 31 10:02:25 corux38 sysctl: net.ipv4.conf.all.rp_filter = 1
Jan 31 10:02:25 corux38 sysctl: net.ipv4.tcp_syncookies = 1
Jan 31 10:02:25 corux38 sysctl: net.ipv4.conf.all.accept_redirects = 0
Jan 31 10:02:25 corux38 sysctl: net.ipv4.conf.default.accept_redirects = 0
Jan 31 10:02:25 corux38 sysctl: fs.file-max = 524288
Jan 31 10:02:25 corux38 sysctl: kernel.sem = 1024 32000 32 4096
Jan 31 10:02:25 corux38 rc.sysinit: Configuring kernel parameters: succeeded
Jan 31 15:02:26 corux38 date: Thu Jan 31 15:02:26 EST 2008
Jan 31 15:02:26 corux38 rc.sysinit: Setting clock (localtime): Thu Jan 31 15:02:26 EST 2008 succeeded
Jan 31 15:02:26 corux38 rc.sysinit: Loading default keymap succeeded
Jan 31 15:02:26 corux38 rc.sysinit: Setting hostname corux38: succeeded
Jan 31 15:02:26 corux38 fsck: /dev/vg00/root: clean, 4335/131072 files, 48559/262144 blocks
Jan 31 15:02:26 corux38 rc.sysinit: Checking root filesystem succeeded
Jan 31 15:02:26 corux38 rc.sysinit: Remounting root filesystem in read-write mode: succeeded
Jan 31 15:02:26 corux38 lvm.static: 8 logical volume(s) in volume group vg00 now active
Jan 31 15:02:26 corux38 rc.sysinit: Setting up Logical Volume Management: succeeded
Jan 31 15:02:26 corux38 fsck: /boot: clean, 38/26104 files, 17822/104388 blocks
Jan 31 15:02:26 corux38 fsck: /dev/vg00/home: clean, 132/262144 files, 20580/524288 blocks
Jan 31 15:02:27 corux38 fsck: /dev/vg00/opt: clean, 83/524288 files, 36957/1048576 blocks
Jan 31 15:02:27 corux38 fsck: /dev/vg00/tmp: clean, 34/131072 files, 13541/262144 blocks
Jan 31 15:02:27 corux38 fsck: /dev/vg00/usr: clean, 30250/524288 files, 169645/1048576 blocks
Jan 31 15:02:27 corux38 fsck: /dev/vg00/usrlocal: clean, 46/270368 files, 17525/540672 blocks
Jan 31 15:02:27 corux38 fsck: /dev/vg00/var: clean, 395/1048576 files, 49124/2097152 blocks
Jan 31 15:02:27 corux38 rc.sysinit: Checking filesystems succeeded
Jan 31 15:02:27 corux38 rc.sysinit: Mounting local filesystems: succeeded
Jan 31 15:02:27 corux38 rc.sysinit: Enabling swap space: succeeded
Jan 31 15:02:28 corux38 microcode_ctl: microcode_ctl startup succeeded
Jan 31 15:02:36 corux38 ssh-server-g3: done.
Jan 31 15:02:28 corux38 vgchange: 8 logical volume(s) in volume group "vg00" monitored
Jan 31 15:02:36 corux38 rc: Starting ssh-server-g3: succeeded
Jan 31 15:02:28 corux38 lvm2-monitor: Starting monitoring for VG vg00: succeeded
Jan 31 15:02:36 corux38 crond: crond startup succeeded
Jan 31 15:02:28 corux38 cpuspeed: cpuspeed startup succeeded
Jan 31 15:02:28 corux38 iptables: succeeded
Jan 31 15:02:36 corux38 atd: atd startup succeeded
Jan 31 15:02:29 corux38 sysctl: net.ipv4.ip_forward = 0
Jan 31 15:02:29 corux38 sysctl: net.ipv4.conf.default.rp_filter = 1
Jan 31 15:02:36 corux38 messagebus: messagebus startup succeeded
Jan 31 15:02:29 corux38 sysctl: net.ipv4.conf.default.accept_source_route = 0
Jan 31 15:02:29 corux38 sysctl: kernel.sysrq = 0
Jan 31 15:02:29 corux38 sysctl: kernel.core_uses_pid = 1
Jan 31 15:02:36 corux38 haldaemon: haldaemon startup succeeded
Jan 31 15:02:29 corux38 sysctl: net.ipv4.conf.all.accept_source_route = 0
Jan 31 15:02:29 corux38 sysctl: net.ipv4.tcp_max_syn_backlog = 4096
Jan 31 15:02:29 corux38 sysctl: net.ipv4.conf.all.rp_filter = 1
Jan 31 15:02:29 corux38 sysctl: net.ipv4.tcp_syncookies = 1
Jan 31 15:02:29 corux38 sysctl: net.ipv4.conf.all.accept_redirects = 0
Jan 31 15:02:29 corux38 sysctl: net.ipv4.conf.default.accept_redirects = 0
Jan 31 15:02:29 corux38 sysctl: fs.file-max = 524288
Jan 31 15:02:29 corux38 sysctl: kernel.sem = 1024 32000 32 4096
Jan 31 15:02:29 corux38 network: Setting network parameters: succeeded
Jan 31 15:02:29 corux38 network: Bringing up loopback interface: succeeded
Jan 31 15:02:31 corux38 network: Bringing up interface eth1: succeeded
Jan 31 15:03:08 corux38 haldaemon: haldaemon -TERM succeeded
Jan 31 15:03:08 corux38 messagebus: messagebus -TERM succeeded
Jan 31 15:03:08 corux38 atd: atd shutdown succeeded
Jan 31 15:03:09 corux38 vsftpd: vsftpd shutdown succeeded
Jan 31 15:03:09 corux38 xinetd: xinetd shutdown succeeded
Jan 31 15:03:09 corux38 crond: crond shutdown succeeded
Jan 31 15:03:09 corux38 ntpd: ntpd shutdown succeeded
Jan 31 15:03:09 corux38 irqbalance: irqbalance shutdown succeeded
Jan 31 15:03:09 corux38 multipathd: multipathd shutdown succeeded
Jan 31 15:03:09 corux38 portmap: portmap shutdown succeeded
Jan 31 15:05:36 corux38 syslog: syslogd startup succeeded
Jan 31 15:05:36 corux38 syslog: klogd startup succeeded
Jan 31 15:05:37 corux38 irqbalance: irqbalance startup succeeded
Jan 31 15:05:37 corux38 multipathd: multipathd startup succeeded
Jan 31 15:05:37 corux38 portmap: portmap startup succeeded
Jan 31 15:05:37 corux38 rc: Starting lm_sensors: succeeded
Jan 31 15:05:37 corux38 xinetd: xinetd startup succeeded
Jan 31 15:05:37 corux38 ntpd: ntpd startup succeeded
Jan 31 15:05:38 corux38 vsftpd: vsftpd vsftpd succeeded
Jan 31 15:05:38 corux38 ssh-server-g3: Starting ssh-server-g3
Jan 31 10:05:03 corux38 rc.sysinit: -e
Jan 31 10:05:05 corux38 start_udev: Starting udev: succeeded
Jan 31 10:05:29 corux38 rc.sysinit: -e
Jan 31 10:05:29 corux38 sysctl: net.ipv4.ip_forward = 0
Jan 31 10:05:29 corux38 sysctl: net.ipv4.conf.default.rp_filter = 1
Jan 31 10:05:29 corux38 sysctl: net.ipv4.conf.default.accept_source_route = 0
Jan 31 10:05:29 corux38 sysctl: kernel.sysrq = 0
Jan 31 10:05:29 corux38 sysctl: kernel.core_uses_pid = 1
Jan 31 10:05:29 corux38 sysctl: net.ipv4.conf.all.accept_source_route = 0
Jan 31 10:05:29 corux38 sysctl: net.ipv4.tcp_max_syn_backlog = 4096
Jan 31 10:05:29 corux38 sysctl: net.ipv4.conf.all.rp_filter = 1
Jan 31 10:05:29 corux38 sysctl: net.ipv4.tcp_syncookies = 1
Jan 31 10:05:29 corux38 sysctl: net.ipv4.conf.all.accept_redirects = 0
Jan 31 10:05:29 corux38 sysctl: net.ipv4.conf.default.accept_redirects = 0
Jan 31 10:05:29 corux38 sysctl: fs.file-max = 524288
Jan 31 10:05:29 corux38 sysctl: kernel.sem = 1024 32000 32 4096
Jan 31 10:05:29 corux38 rc.sysinit: Configuring kernel parameters: succeeded
Jan 31 15:05:30 corux38 date: Thu Jan 31 15:05:30 EST 2008
Jan 31 15:05:30 corux38 rc.sysinit: Setting clock (localtime): Thu Jan 31 15:05:30 EST 2008 succeeded
Jan 31 15:05:30 corux38 rc.sysinit: Loading default keymap succeeded
Jan 31 15:05:30 corux38 rc.sysinit: Setting hostname corux38: succeeded
Jan 31 15:05:30 corux38 fsck: /dev/vg00/root: clean, 4335/131072 files, 48559/262144 blocks
Jan 31 15:05:30 corux38 rc.sysinit: Checking root filesystem succeeded
Jan 31 15:05:30 corux38 rc.sysinit: Remounting root filesystem in read-write mode: succeeded
Jan 31 15:05:30 corux38 lvm.static: 8 logical volume(s) in volume group vg00 now active
Jan 31 15:05:30 corux38 rc.sysinit: Setting up Logical Volume Management: succeeded
Jan 31 15:05:30 corux38 fsck: /boot: clean, 38/26104 files, 17822/104388 blocks
Jan 31 15:05:30 corux38 fsck: /dev/vg00/home: clean, 132/262144 files, 20580/524288 blocks
Jan 31 15:05:30 corux38 fsck: /dev/vg00/opt: clean, 83/524288 files, 36957/1048576 blocks
Jan 31 15:05:30 corux38 fsck: /dev/vg00/tmp: clean, 34/131072 files, 13541/262144 blocks
Jan 31 15:05:30 corux38 fsck: /dev/vg00/usr: clean, 30250/524288 files, 169645/1048576 blocks
Jan 31 15:05:30 corux38 fsck: /dev/vg00/usrlocal: clean, 46/270368 files, 17525/540672 blocks
Jan 31 15:05:31 corux38 fsck: /dev/vg00/var: clean, 395/1048576 files, 49141/2097152 blocks
Jan 31 15:05:31 corux38 rc.sysinit: Checking filesystems succeeded
Jan 31 15:05:31 corux38 rc.sysinit: Mounting local filesystems: succeeded
Jan 31 15:05:31 corux38 rc.sysinit: Enabling swap space: succeeded
Jan 31 15:05:32 corux38 microcode_ctl: microcode_ctl startup succeeded
Jan 31 15:05:32 corux38 vgchange: 8 logical volume(s) in volume group "vg00" monitored
Jan 31 15:05:32 corux38 lvm2-monitor: Starting monitoring for VG vg00: succeeded
Jan 31 15:05:41 corux38 ssh-server-g3: done.
Jan 31 15:05:32 corux38 cpuspeed: cpuspeed startup succeeded
Jan 31 15:05:41 corux38 rc: Starting ssh-server-g3: succeeded
Jan 31 15:05:32 corux38 iptables: succeeded
Jan 31 15:05:32 corux38 sysctl: net.ipv4.ip_forward = 0
Jan 31 15:05:41 corux38 crond: crond startup succeeded
Jan 31 15:05:32 corux38 sysctl: net.ipv4.conf.default.rp_filter = 1
Jan 31 15:05:41 corux38 atd: atd startup succeeded
Jan 31 15:05:32 corux38 sysctl: net.ipv4.conf.default.accept_source_route = 0
Jan 31 15:05:32 corux38 sysctl: kernel.sysrq = 0
Jan 31 15:05:32 corux38 sysctl: kernel.core_uses_pid = 1
Jan 31 15:05:42 corux38 messagebus: messagebus startup succeeded
Jan 31 15:05:32 corux38 sysctl: net.ipv4.conf.all.accept_source_route = 0
Jan 31 15:05:32 corux38 sysctl: net.ipv4.tcp_max_syn_backlog = 4096
Jan 31 15:05:42 corux38 haldaemon: haldaemon startup succeeded
Jan 31 15:05:32 corux38 sysctl: net.ipv4.conf.all.rp_filter = 1
Jan 31 15:05:32 corux38 sysctl: net.ipv4.tcp_syncookies = 1
Jan 31 15:05:32 corux38 sysctl: net.ipv4.conf.all.accept_redirects = 0
Jan 31 15:05:32 corux38 sysctl: net.ipv4.conf.default.accept_redirects = 0
Jan 31 15:05:32 corux38 sysctl: fs.file-max = 524288
Jan 31 15:05:32 corux38 sysctl: kernel.sem = 1024 32000 32 4096
Jan 31 15:05:32 corux38 network: Setting network parameters: succeeded
Jan 31 15:05:32 corux38 network: Bringing up loopback interface: succeeded
Jan 31 15:05:36 corux38 network: Bringing up interface eth1: succeeded
# multipath -ll
mpath1 (00040026_05:84)
[size=13 GB][features="0"][hwhandler="0"]
\_ round-robin 0 [enabled]
\_ 2:0:0:1 sdf 8:80 [active][ready]
\_ 1:0:0:1 sdb 8:16 [active][ready]
mpath0 (00040026_05:83)
[size=13 GB][features="0"][hwhandler="0"]
\_ round-robin 0 [enabled]
\_ 2:0:0:0 sde 8:64 [active][ready]
\_ 1:0:0:0 sda 8:0 [active][ready]# service multipathd stop
# multipath -F
# service multipathd start
# multipath -v3
load path identifiers cache
#
# all paths in cache :
#
00040026_05:83 1:0:0:0 sda 8:0 HP /OPEN-E /2114
00040026_05:84 1:0:0:1 sdb 8:16 HP /OPEN-E /2114
00040026_05:85 1:0:0:2 sdc 8:32 HP /OPEN-E /2114
00040026_05:86 1:0:0:3 sdd 8:48 HP /OPEN-E /2114
00040026_05:83 2:0:0:0 sde 8:64 HP /OPEN-E /2114
00040026_05:84 2:0:0:1 sdf 8:80 HP /OPEN-E /2114
00040026_05:85 2:0:0:2 sdg 8:96 HP /OPEN-E /2114
00040026_05:86 2:0:0:3 sdh 8:112 HP /OPEN-E /2114
cciss!c0d0 blacklisted
cciss!c0d1 blacklisted
dm-0 blacklisted
dm-1 blacklisted
dm-2 blacklisted
dm-3 blacklisted
dm-4 blacklisted
dm-5 blacklisted
dm-6 blacklisted
dm-7 blacklisted
fd0 blacklisted
hda blacklisted
md0 blacklisted
ram0 blacklisted
ram10 blacklisted
ram11 blacklisted
ram12 blacklisted
ram13 blacklisted
ram14 blacklisted
ram15 blacklisted
ram1 blacklisted
ram2 blacklisted
ram3 blacklisted
ram4 blacklisted
ram5 blacklisted
ram6 blacklisted
ram7 blacklisted
ram8 blacklisted
ram9 blacklisted
===== path info sda (mask 0x1f) =====
bus = 1
dev_t = 8:0
size = 28452960
vendor = HP
product = OPEN-E
rev = 2114
h:b:t:l = 1:0:0:0
tgt_node_name = 0x50060e80039c5a04
serial = 40026
path checker = tur (controler setting)
state = 2
getprio = /bin/true (internal default)
prio = 0
uid = 00040026_05:83 (cache)
===== path info sdb (mask 0x1f) =====
bus = 1
dev_t = 8:16
size = 28452960
vendor = HP
product = OPEN-E
rev = 2114
h:b:t:l = 1:0:0:1
tgt_node_name = 0x50060e80039c5a04
serial = 40026
path checker = tur (controler setting)
state = 2
getprio = /bin/true (internal default)
prio = 0
uid = 00040026_05:84 (cache)
===== path info sdc (mask 0x1f) =====
bus = 1
dev_t = 8:32
size = 28452960
vendor = HP
product = OPEN-E
rev = 2114
h:b:t:l = 1:0:0:2
tgt_node_name = 0x50060e80039c5a04
serial = 40026
path checker = tur (controler setting)
state = 2
getprio = /bin/true (internal default)
prio = 0
uid = 00040026_05:85 (cache)
===== path info sdd (mask 0x1f) =====
bus = 1
dev_t = 8:48
size = 28452960
vendor = HP
product = OPEN-E
rev = 2114
h:b:t:l = 1:0:0:3
tgt_node_name = 0x50060e80039c5a04
serial = 40026
path checker = tur (controler setting)
state = 2
getprio = /bin/true (internal default)
prio = 0
uid = 00040026_05:86 (cache)
===== path info sde (mask 0x1f) =====
bus = 1
dev_t = 8:64
size = 28452960
vendor = HP
product = OPEN-E
rev = 2114
h:b:t:l = 2:0:0:0
tgt_node_name = 0x50060e80039c5a14
serial = 40026
path checker = tur (controler setting)
state = 2
getprio = /bin/true (internal default)
prio = 0
uid = 00040026_05:83 (cache)
===== path info sdf (mask 0x1f) =====
bus = 1
dev_t = 8:80
size = 28452960
vendor = HP
product = OPEN-E
rev = 2114
h:b:t:l = 2:0:0:1
tgt_node_name = 0x50060e80039c5a14
serial = 40026
path checker = tur (controler setting)
state = 2
getprio = /bin/true (internal default)
prio = 0
uid = 00040026_05:84 (cache)
===== path info sdg (mask 0x1f) =====
bus = 1
dev_t = 8:96
size = 28452960
vendor = HP
product = OPEN-E
rev = 2114
h:b:t:l = 2:0:0:2
tgt_node_name = 0x50060e80039c5a14
serial = 40026
path checker = tur (controler setting)
state = 2
getprio = /bin/true (internal default)
prio = 0
uid = 00040026_05:85 (cache)
===== path info sdh (mask 0x1f) =====
bus = 1
dev_t = 8:112
size = 28452960
vendor = HP
product = OPEN-E
rev = 2114
h:b:t:l = 2:0:0:3
tgt_node_name = 0x50060e80039c5a14
serial = 40026
path checker = tur (controler setting)
state = 2
getprio = /bin/true (internal default)
prio = 0
uid = 00040026_05:86 (cache)
#
# all paths :
#
00040026_05:83 1:0:0:0 sda 8:0 [ready] HP /OPEN-E /2114
00040026_05:84 1:0:0:1 sdb 8:16 [ready] HP /OPEN-E /2114
00040026_05:85 1:0:0:2 sdc 8:32 [ready] HP /OPEN-E /2114
00040026_05:86 1:0:0:3 sdd 8:48 [ready] HP /OPEN-E /2114
00040026_05:83 2:0:0:0 sde 8:64 [ready] HP /OPEN-E /2114
00040026_05:84 2:0:0:1 sdf 8:80 [ready] HP /OPEN-E /2114
00040026_05:85 2:0:0:2 sdg 8:96 [ready] HP /OPEN-E /2114
00040026_05:86 2:0:0:3 sdh 8:112 [ready] HP /OPEN-E /2114
Initialized new bindings file [/var/lib/multipath/bindings]
No matching wwid [00040026_05:83] in bindings file.
Created new binding [mpath0] for WWID [00040026_05:83]
pgpolicy = multibus (controler setting)
selector = round-robin 0 (internal default)
features = 0 (internal default)
hwhandler = 0 (internal default)
rr_weight = 2 (config file default)
rr_min_io = 100 (config file default)
no_path_retry = -1 (config file default)
pg_timeout = NONE (internal default)
0 28452960 multipath 0 0 1 1 round-robin 0 2 1 8:0 100 8:64 100
set ACT_CREATE: map does not exists
message mpath0 0 switch_group 1
create: mpath0 (00040026_05:83)
[size=13 GB][features="0"][hwhandler="0"]
\_ round-robin 0
\_ 1:0:0:0 sda 8:0 [ready]
\_ 2:0:0:0 sde 8:64 [ready]
reloading features
No matching wwid [00040026_05:84] in bindings file.
Created new binding [mpath1] for WWID [00040026_05:84]
pgpolicy = multibus (controler setting)
selector = round-robin 0 (internal default)
features = 0 (internal default)
hwhandler = 0 (internal default)
rr_weight = 2 (config file default)
rr_min_io = 100 (config file default)
no_path_retry = -1 (config file default)
pg_timeout = NONE (internal default)
0 28452960 multipath 0 0 1 1 round-robin 0 2 1 8:16 100 8:80 100
set ACT_CREATE: map does not exists
message mpath1 0 switch_group 1
create: mpath1 (00040026_05:84)
[size=13 GB][features="0"][hwhandler="0"]
\_ round-robin 0
\_ 1:0:0:1 sdb 8:16 [ready]
\_ 2:0:0:1 sdf 8:80 [ready]
reloading features
No matching wwid [00040026_05:85] in bindings file.
Created new binding [mpath2] for WWID [00040026_05:85]
pgpolicy = multibus (controler setting)
selector = round-robin 0 (internal default)
features = 0 (internal default)
hwhandler = 0 (internal default)
rr_weight = 2 (config file default)
rr_min_io = 100 (config file default)
no_path_retry = -1 (config file default)
pg_timeout = NONE (internal default)
0 28452960 multipath 0 0 1 1 round-robin 0 2 1 8:32 100 8:96 100
set ACT_CREATE: map does not exists
message mpath2 0 switch_group 1
create: mpath2 (00040026_05:85)
[size=13 GB][features="0"][hwhandler="0"]
\_ round-robin 0
\_ 1:0:0:2 sdc 8:32 [ready]
\_ 2:0:0:2 sdg 8:96 [ready]
reloading features
No matching wwid [00040026_05:86] in bindings file.
Created new binding [mpath3] for WWID [00040026_05:86]
pgpolicy = multibus (controler setting)
selector = round-robin 0 (internal default)
features = 0 (internal default)
hwhandler = 0 (internal default)
rr_weight = 2 (config file default)
rr_min_io = 100 (config file default)
no_path_retry = -1 (config file default)
pg_timeout = NONE (internal default)
0 28452960 multipath 0 0 1 1 round-robin 0 2 1 8:48 100 8:112 100
set ACT_CREATE: map does not exists
message mpath3 0 switch_group 1
create: mpath3 (00040026_05:86)
[size=13 GB][features="0"][hwhandler="0"]
\_ round-robin 0
\_ 1:0:0:3 sdd 8:48 [ready]
\_ 2:0:0:3 sdh 8:112 [ready]
reloading features
# multipath -ll
mpath2 (00040026_05:85)
[size=13 GB][features="0"][hwhandler="0"]
\_ round-robin 0 [active]
\_ 1:0:0:2 sdc 8:32 [active][ready]
\_ 2:0:0:2 sdg 8:96 [active][ready]
mpath1 (00040026_05:84)
[size=13 GB][features="0"][hwhandler="0"]
\_ round-robin 0 [active]
\_ 1:0:0:1 sdb 8:16 [active][ready]
\_ 2:0:0:1 sdf 8:80 [active][ready]
mpath0 (00040026_05:83)
[size=13 GB][features="0"][hwhandler="0"]
\_ round-robin 0 [active]
\_ 1:0:0:0 sda 8:0 [active][ready]
\_ 2:0:0:0 sde 8:64 [active][ready]
mpath3 (00040026_05:86)
[size=13 GB][features="0"][hwhandler="0"]
\_ round-robin 0 [active]
\_ 1:0:0:3 sdd 8:48 [active][ready]
\_ 2:0:0:3 sdh 8:112 [active][ready]
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
