The multipathd, on boot, seems to get some of the devices, but not all. To keep the thread clean, can you look for my email dated January 31 with the subject "Multipath not rebuilding correctly on reboot"? There is a full description there with output files showing the state things appear in at a several key points. If you can't find that email, I'll resend. Thanks, Rick -----Original Message----- From: dm-devel-bounces@xxxxxxxxxx [mailto:dm-devel-bounces@xxxxxxxxxx] On Behalf Of malahal@xxxxxxxxxx Sent: Thursday, February 07, 2008 2:53 PM To: dm-devel@xxxxxxxxxx Subject: Re: Multipath and getuid_callout issues withHPXP1024diskarray Greene, Rick [rick.greene@xxxxxxxxxxxx] wrote: > Works fine, except for an odd issue at reboot times, for which I've got > a separate unanswered query out to this list. Is it possible that your paths were not ready when multipath tried to configure your paths as part of the boot process? Will they get configured correctly when you restart the rc service (multipathd)? If they get configured correctly when you run 'service multipathd restart', I would assume that the problem is udev related, and a udevsettle in the /etc/init.d/multipathd init script may help! I am out of ideas and just shooting in the dark! :-) --Malahal. -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
