RE: multipath device name

["Ariel Gottlieb" <arielg@xxxxxxxxxxxx>]

Title: Re: multipath device name

Erez,

Add the following to your multipath.conf  file:

 

defaults {

        udev_dir                /dev

        polling_interval        2

        failback                immediate

        no_path_retry           3

}

 

Regards,

Ariel

---

From: dm-devel-bounces@xxxxxxxxxx [mailto:dm-devel-bounces@xxxxxxxxxx] On Behalf Of Erez Zilber
Sent: Monday, January 28, 2008 10:23 PM
To: device-mapper development
Subject: RE: multipath device name

 

> Yes, I meant the above. Check if you have any problems with your
> multipath.conf file. Make sure you enclose "multipath {}" within
> "multipaths {}" block. Run 'multipath -t' and make sure your changes are
> listed in its output.
>
> What is your multipath.conf file?

Problem solved:

I copied /usr/share/doc/packages/multipath-tools/multipath.conf.annotated and uncommented the block with the "red" device. The problem is that I didn't remove the comments from 'multipaths {' and the '}' at the end of the block. After uncommenting it, I see /dev/mapper/red.

 

Any idea about the other question that I had on this thread (about slow and strange fail over)? Any help will be appreciated.

 

Thanks,

Erez

--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel