> Erez Zilber [erezz@xxxxxxxxxxxx] wrote:
> > And another question:
> >
> > I've added the following entry to multipath.conf:
> >
> > multipath {
> > wwid 3600c0ff000d508d7def2894702000000
> > alias red
> > }
> >
> > which should represent the following device:
> >
> > 3600c0ff000d508d7def2894702000000dm-1 DotHill,R/Evo 2730-2R
> > [size=82G][features=0][hwhandler=0]
> > \_ round-robin 0 [prio=0][enabled]
> > \_ 16:0:0:0 sdc 8:32 [failed][faulty]
> > \_ round-robin 0 [prio=0][active]
> > \_ 17:0:0:0 sdd 8:48 [active][undef]
> >
> > Where should I see "red"? Is it under /dev somewhere?
>
> If it worked, it should be /dev/mapper/red, but I have a suspicion that it
> didn't work for you based on your above 'multipath -l' output.
No, it didn't work. Do I need to do anything special to make it work?
Thanks,
Erez
<<winmail.dat>>
-- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
