Hi,
On Wed, 12 Dec 2007 11:09:12 +0200, Boaz Harrosh <bharrosh@xxxxxxxxxxx> wrote:
> > Index: 2.6.24-rc4/drivers/block/xsysace.c
> > ===================================================================
> > --- 2.6.24-rc4.orig/drivers/block/xsysace.c
> > +++ 2.6.24-rc4/drivers/block/xsysace.c
> > @@ -703,7 +703,7 @@ static void ace_fsm_dostate(struct ace_d
> >
> > /* bio finished; is there another one? */
> > i = ace->req->current_nr_sectors;
> > - if (end_that_request_first(ace->req, 1, i)) {
> > + if (__blk_end_request(ace->req, 0, i)) {
>
> end_that_request_first() took sectors __blk_end_request() now takes
> bytes
Thank you for pointing it out! And I'm very sorry for the bug.
I have checked all conversions between sectors and bytes through
all patches again, and I found no other miss conversions.
Below is the revised patch for xsysace.
Thanks,
Kiyoshi Ueda
Subject: [PATCH 20/30] blk_end_request: changing xsysace (take 4)
This patch converts xsysace to use blk_end_request interfaces.
Related 'uptodate' arguments are converted to 'error'.
xsysace is a little bit different from "normal" drivers.
xsysace driver has a state machine in it.
It calls end_that_request_first() and end_that_request_last()
from different states. (ACE_FSM_STATE_REQ_TRANSFER and
ACE_FSM_STATE_REQ_COMPLETE, respectively.)
However, those states are consecutive and without any interruption
inbetween.
So we can just follow the standard conversion rule (b) mentioned in
the patch subject "[PATCH 01/30] blk_end_request: add new request
completion interface".
In ace_fsm_dostate(), the variable 'i' was used only for passing
sector size of the request to end_that_request_first().
So I removed it and changed the code to pass the size in bytes
directly to __blk_end_request().
Cc: Grant Likely <grant.likely@xxxxxxxxxxxx>
Signed-off-by: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
Signed-off-by: Jun'ichi Nomura <j-nomura@xxxxxxxxxxxxx>
---
drivers/block/xsysace.c | 9 ++-------
1 files changed, 2 insertions(+), 7 deletions(-)
Index: 2.6.24-rc4/drivers/block/xsysace.c
===================================================================
--- 2.6.24-rc4.orig/drivers/block/xsysace.c
+++ 2.6.24-rc4/drivers/block/xsysace.c
@@ -483,7 +483,6 @@ static void ace_fsm_dostate(struct ace_d
u32 status;
u16 val;
int count;
- int i;
#if defined(DEBUG)
dev_dbg(ace->dev, "fsm_state=%i, id_req_count=%i\n",
@@ -688,7 +687,6 @@ static void ace_fsm_dostate(struct ace_d
}
/* Transfer the next buffer */
- i = 16;
if (ace->fsm_task == ACE_TASK_WRITE)
ace->reg_ops->dataout(ace);
else
@@ -702,8 +700,8 @@ static void ace_fsm_dostate(struct ace_d
}
/* bio finished; is there another one? */
- i = ace->req->current_nr_sectors;
- if (end_that_request_first(ace->req, 1, i)) {
+ if (__blk_end_request(ace->req, 0,
+ blk_rq_cur_bytes(ace->req))) {
/* dev_dbg(ace->dev, "next block; h=%li c=%i\n",
* ace->req->hard_nr_sectors,
* ace->req->current_nr_sectors);
@@ -718,9 +716,6 @@ static void ace_fsm_dostate(struct ace_d
break;
case ACE_FSM_STATE_REQ_COMPLETE:
- /* Complete the block request */
- blkdev_dequeue_request(ace->req);
- end_that_request_last(ace->req, 1);
ace->req = NULL;
/* Finished request; go to idle state */
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
