On Sat, Dec 01 2007 at 1:35 +0200, Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx> wrote:
> This patch converts bidi of scsi mid-layer to use blk_end_request().
>
> rq->next_rq represents a pair of bidi requests.
> (There are no other use of 'next_rq' of struct request.)
> For both requests in the pair, end_that_request_chunk() should be
> called before end_that_request_last() is called for one of them.
> Since the calls to end_that_request_first()/chunk() and
> end_that_request_last() are packaged into blk_end_request(),
> the handling of next_rq completion has to be moved into
> blk_end_request(), too.
>
> Bidi sets its specific value to rq->data_len before the request is
> completed so that upper-layer can read it.
> This setting must be between end_that_request_chunk() and
> end_that_request_last(), because rq->data_len may be used
> in end_that_request_chunk() by blk_trace and so on.
> To satisfy the requirement, use blk_end_request_callback() which
> is added in PATCH 25 only for the tricky drivers.
>
> If bidi didn't reuse rq->data_len and added new members to request
> for the specific value, it could set before end_that_request_chunk()
> and use the standard blk_end_request() like below.
>
> void scsi_end_bidi_request(struct scsi_cmnd *cmd)
> {
> struct request *req = cmd->request;
>
> rq->resid = scsi_out(cmd)->resid;
> rq->next_rq->resid = scsi_in(cmd)->resid;
>
> if (blk_end_request(req, 1, req->data_len))
> BUG();
>
> scsi_release_buffers(cmd);
> scsi_next_command(cmd);
> }
>
> Signed-off-by: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
> Signed-off-by: Jun'ichi Nomura <j-nomura@xxxxxxxxxxxxx>
> ---
> block/ll_rw_blk.c | 18 +++++++++++++
> drivers/scsi/scsi_lib.c | 66 ++++++++++++++++++++++++------------------------
> 2 files changed, 52 insertions(+), 32 deletions(-)
>
> Index: 2.6.24-rc3-mm2/drivers/scsi/scsi_lib.c
> ===================================================================
> --- 2.6.24-rc3-mm2.orig/drivers/scsi/scsi_lib.c
> +++ 2.6.24-rc3-mm2/drivers/scsi/scsi_lib.c
> @@ -629,28 +629,6 @@ void scsi_run_host_queues(struct Scsi_Ho
> scsi_run_queue(sdev->request_queue);
> }
>
> -static void scsi_finalize_request(struct scsi_cmnd *cmd, int uptodate)
> -{
> - struct request_queue *q = cmd->device->request_queue;
> - struct request *req = cmd->request;
> - unsigned long flags;
> -
> - add_disk_randomness(req->rq_disk);
> -
> - spin_lock_irqsave(q->queue_lock, flags);
> - if (blk_rq_tagged(req))
> - blk_queue_end_tag(q, req);
> -
> - end_that_request_last(req, uptodate);
> - spin_unlock_irqrestore(q->queue_lock, flags);
> -
> - /*
> - * This will goose the queue request function at the end, so we don't
> - * need to worry about launching another command.
> - */
> - scsi_next_command(cmd);
> -}
> -
> /*
> * Function: scsi_end_request()
> *
> @@ -921,6 +899,20 @@ void scsi_release_buffers(struct scsi_cm
> EXPORT_SYMBOL(scsi_release_buffers);
>
> /*
> + * Called from blk_end_request_callback() after all DATA in rq and its next_rq
> + * are completed before rq is completed/freed.
> + */
> +static int scsi_end_bidi_request_cb(struct request *rq)
> +{
> + struct scsi_cmnd *cmd = rq->special;
> +
> + rq->data_len = scsi_out(cmd)->resid;
> + rq->next_rq->data_len = scsi_in(cmd)->resid;
> +
> + return 0;
> +}
> +
> +/*
> * Bidi commands Must be complete as a whole, both sides at once.
> * If part of the bytes were written and lld returned
> * scsi_in()->resid and/or scsi_out()->resid this information will be left
> @@ -931,22 +923,32 @@ void scsi_end_bidi_request(struct scsi_c
> {
> struct request *req = cmd->request;
>
> - end_that_request_chunk(req, 1, req->data_len);
> - req->data_len = scsi_out(cmd)->resid;
> -
> - end_that_request_chunk(req->next_rq, 1, req->next_rq->data_len);
> - req->next_rq->data_len = scsi_in(cmd)->resid;
> -
> - scsi_release_buffers(cmd);
> -
> /*
> *FIXME: If ll_rw_blk.c is changed to also put_request(req->next_rq)
> - * in end_that_request_last() then this WARN_ON must be removed.
> + * in blk_end_request() then this WARN_ON must be removed.
> * for now, upper-driver must have registered an end_io.
> */
> WARN_ON(!req->end_io);
>
> - scsi_finalize_request(cmd, 1);
> + /*
> + * blk_end_request() family take care of data completion of next_rq.
> + *
> + * req->data_len and req->next_rq->data_len must be set after
> + * all data are completed, since they may be referenced during
> + * the data completion process.
> + * So use the callback feature of blk_end_request() here.
> + *
> + * NOTE: If bidi doesn't reuse the data_len field for upper-layer's
> + * reference (e.g. adds new members for it to struct request),
> + * we can use the standard blk_end_request() interface here.
> + */
> + if (blk_end_request_callback(req, 1, req->data_len,
> + scsi_end_bidi_request_cb))
> + /* req has not been completed */
> + BUG();
> +
> + scsi_release_buffers(cmd);
> + scsi_next_command(cmd);
> }
>
> /*
> Index: 2.6.24-rc3-mm2/block/ll_rw_blk.c
> ===================================================================
> --- 2.6.24-rc3-mm2.orig/block/ll_rw_blk.c
> +++ 2.6.24-rc3-mm2/block/ll_rw_blk.c
> @@ -3817,6 +3817,12 @@ int blk_end_request(struct request *rq,
> if (blk_fs_request(rq) || blk_pc_request(rq)) {
> if (__end_that_request_first(rq, uptodate, nr_bytes))
> return 1;
> +
> + /* Bidi request must be completed as a whole */
> + if (blk_bidi_rq(rq) &&
> + __end_that_request_first(rq->next_rq, uptodate,
> + blk_rq_bytes(rq->next_rq)))
> + return 1;
> }
>
> add_disk_randomness(rq->rq_disk);
> @@ -3840,6 +3846,12 @@ int __blk_end_request(struct request *rq
> if (blk_fs_request(rq) || blk_pc_request(rq)) {
> if (__end_that_request_first(rq, uptodate, nr_bytes))
> return 1;
> +
> + /* Bidi request must be completed as a whole */
> + if (blk_bidi_rq(rq) &&
> + __end_that_request_first(rq->next_rq, uptodate,
> + blk_rq_bytes(rq->next_rq)))
> + return 1;
> }
>
> add_disk_randomness(rq->rq_disk);
> @@ -3884,6 +3896,12 @@ int blk_end_request_callback(struct requ
> if (blk_fs_request(rq) || blk_pc_request(rq)) {
> if (__end_that_request_first(rq, uptodate, nr_bytes))
> return 1;
> +
> + /* Bidi request must be completed as a whole */
> + if (blk_bidi_rq(rq) &&
> + __end_that_request_first(rq->next_rq, uptodate,
> + blk_rq_bytes(rq->next_rq)))
> + return 1;
> }
>
> /* Special feature for tricky drivers */
rq->data_len = scsi_out(cmd)->resid is Not Just a problem of bidi
it is a General problem of scsi residual handling, and user code.
Even today before any bidi. at scsi_lib.c at scsi_io_completion()
we do req->data_len = scsi_get_resid(cmd);
( or: req->data_len = cmd->resid; depends which version you look)
And then call scsi_end_request() which calls __end_that_request_first/last
So it is assumed even today that req->data_len is not touched by
__end_that_request_first/last unless __end_that_request_first returned
that there is more work to do and the command is resubmitted in which
case the resid information is discarded.
So if the regular resid handling is acceptable - Set req->data_len
before the call to __end_that_request_first/last, or blk_end_request()
in your case, then here goes your second client of the _callback and
it can be removed.
But if it is found that req->data_len is touched and the resid information
gets lost, than it should be fixed for the common uni-io case, by - for example
- pass resid to the blk_end_request() function.
(So in any way the _callback can go)
Boaz
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
