I guess my problems are never completely eliminated... :) Setup device-mapper multipathing in RHEL 4 http://kbase.redhat.com/faq/FAQ_51_7170.shtm Per the above KB, after the multipath daemon is configured and started, "The multipath -v2 command prints out multipathed paths that show which devices are multipathed. If the command does not print anything out, ensure that all SAN connections are set up properly and the system is multipathed." # multipath -v2 I get nothing on my server. Although here's what I do get. # multipath -l 30690a018f015191a6472441d1500f057 [size=4 GB][features="0"][hwhandler="0"] \_ round-robin 0 [active] \_ 3:0:0:0 sdc 8:32 [active][ready] \_ round-robin 0 [enabled] \_ 1:0:1:0 sdb 8:16 [active][ready] # multipath -v3 --- snipped --- # # all paths in cache : # 30690a018f015191a6472441d1500f057 1:0:1:0 sdb 8:16 [active][ready] EQLOGIC / 30690a018f015191a6472441d1500f057 3:0:0:0 sdc 8:32 [active][ready] EQLOGIC / hda blacklisted sda blacklisted --- snipped --- What am I missing? As far as I can tell, I'm following the RHEL KB perfectly and it's still not working as expected (although now I'm much farther than before!). Thanks! Scott -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
