Hi all, Please look at the output from "multipath -ll" backup (360019b9000d7e1100000444b46be82c4) dm-1 DELL ,MD3000 [size=200G][features=0][hwhandler=1 rdac] \_ round-robin 0 [prio=3][active] \_ 1:0:1:2 sdh 8:112 [active][ready] \_ round-robin 0 [prio=0][enabled] \_ 1:0:0:2 sdd 8:48 [active][ghost] xen (360019b9000d7e1100000445a47314b36) dm-0 DELL ,MD3000 [size=200G][features=0][hwhandler=1 rdac] \_ round-robin 0 [prio=3][enabled] \_ 1:0:0:3 sde 8:64 [active][ready] \_ round-robin 0 [prio=0][enabled] \_ 1:0:1:3 sdi 8:128 [active][ghost] vmware (360019b9000d7e1100000444846be81b6) dm-3 DELL ,MD3000 [size=200G][features=0][hwhandler=1 rdac] \_ round-robin 0 [prio=3][enabled] \_ 1:0:0:0 sdb 8:16 [active][ready] \_ round-robin 0 [prio=0][enabled] \_ 1:0:1:0 sdf 8:80 [active][ghost] data (360019b9000d7ddab0000493846be81e5) dm-2 DELL ,MD3000 [size=200G][features=0][hwhandler=1 rdac] \_ round-robin 0 [prio=3][active] \_ 1:0:1:1 sdg 8:96 [active][ready] \_ round-robin 0 [prio=0][enabled] \_ 1:0:0:1 sdc 8:32 [active][ghost] See the xen and vmware disks. They both display enable / enable instead of active / enable. Is this correct? Or is a disaster waiting to happen? Please advice! Sander -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel