hello
i have strange problem with multipath
my configuration is: sunfire x4100 with 2 lsi sas 3442-e cards connected
to promise vtrak e310s (mptsas driver)
after i boot and multipath-tools is not installed, it look like this
redneck:~# lsscsi
[0:0:0:0] cd/dvd AMI Virtual CDROM 1.00 /dev/scd0
[1:0:0:0] disk AMI Virtual Floppy 1.00 /dev/sdb
[2:0:0:0] disk Promise VTrak E310s 0322 /dev/sda
[3:0:0:0] disk Promise VTrak E310s 0322 /dev/sdc
[4:0:0:0] disk SEAGATE ST973402SSUN72G 0400 -
[4:0:1:0] disk SEAGATE ST973402SSUN72G 0400 -
[4:1:0:0] disk LSILOGIC Logical Volume 3000 /dev/sdd
redneck:~# pvs
Found duplicate PV tS0KIb4H0CVGAspUqdWIkZSUVSwMlwib: using /dev/sdc
not /dev/sda
PV VG Fmt Attr PSize PFree
/dev/sdc vg0 lvm2 a- 2.32T 3.00G
and i want create multipath failover device with sda and sdc (and on top
of that device i want use LVM)
when i install multipath-tools (debian 4.0)
apt-get install multipath-tools
it automatically start multipathd, but it is in D state, it freeze somewhere
multipathd -k dont work
sda/sdc is not accessible, every proces accessing sda/sdc go to D state
and after some minutes there are some mesasges from kernel:
Oct 18 21:00:15 redneck kernel: mptscsih: ioc1: attempting task abort!
(sc=ffff8102157fc080)
Oct 18 21:00:15 redneck kernel: sd 0:0:0:0: [sda] CDB: Read(10): 28 00
00 00 00 00 00 00 01 00
Oct 18 21:00:19 redneck kernel: mptbase: ioc0: LogInfo(0x31140000):
Originator={PL}, Code={IO Executed}, SubCode(0x0000)
Oct 18 21:00:19 redneck kernel: mptscsih: ioc0: task abort: SUCCESS
(sc=ffff8102157fc080)
Oct 18 21:00:29 redneck kernel: mptscsih: ioc0: attempting task abort!
(sc=ffff8102157fc080)
Oct 18 21:00:29 redneck kernel: sd 0:0:0:0: [sda] CDB: Test Unit Ready:
00 00 00 00 00 00
Oct 18 21:00:34 redneck kernel: mptbase: ioc0: LogInfo(0x31140000):
Originator={PL}, Code={IO Executed}, SubCode(0x0000)
Oct 18 21:00:34 redneck kernel: mptscsih: ioc0: task abort: SUCCESS
(sc=ffff8102157fc080)
Oct 18 21:00:34 redneck kernel: mptscsih: ioc0: attempting task abort!
(sc=ffff8104163c30c0)
Oct 18 21:00:34 redneck kernel: sd 0:0:0:0: [sda] CDB: Read(10): 28 00
00 00 00 00 00 00 01 00
Oct 18 21:00:39 redneck kernel: mptbase: ioc0: LogInfo(0x31140000):
Originator={PL}, Code={IO Executed}, SubCode(0x0000)
Oct 19 21:00:39 redneck kernel: mptscsih: ioc0: task abort: SUCCESS
(sc=ffff8104163c30c0)
Oct 18 21:00:49 redneck kernel: mptscsih: ioc0: attempting task abort!
(sc=ffff8104163c30c0)
Oct 18 21:00:49 redneck kernel: sd 0:0:0:0: [sda] CDB: Test Unit Ready:
00 00 00 00 00 00
Oct 18 21:00:50 redneck kernel: mptbase: ioc0: LogInfo(0x31140000):
Originator={PL}, Code={IO Executed}, SubCode(0x0000)
Oct 18 21:00:50 redneck kernel: mptscsih: ioc0: Response
Code(0x00000005): F/W: The requested task failed.
Oct 18 21:00:50 redneck kernel: mptscsih: ioc0: task abort: SUCCESS
(sc=ffff8104163c30c0)
Oct 18 21:00:50 redneck kernel: mptscsih: ioc0: attempting target reset!
(sc=ffff8102157fc080)
Oct 18 21:00:50 redneck kernel: sd 0:0:0:0: [sda] CDB: Read(10): 28 00
00 00 00 00 00 00 01 00
Oct 18 21:00:52 redneck kernel: mptscsih: ioc0: Issue of TaskMgmt failed!
Oct 18 21:00:52 redneck kernel: mptscsih: ioc0: target reset: FAILED
(sc=ffff8102157fc080)
Oct 18 21:00:52 redneck kernel: mptscsih: ioc0: attempting bus reset!
(sc=ffff8102157fc080)
Oct 18 21:00:52 redneck kernel: sd 0:0:0:0: [sda] CDB: Read(10): 28 00
00 00 00 00 00 00 01 00
Oct 18 21:01:07 redneck kernel: mptbase: Initiating ioc0 recovery
Oct 18 21:01:07 redneck kernel: mptscsih: ioc0: Issue of TaskMgmt failed!
Oct 18 21:01:07 redneck kernel: mptscsih: ioc0: bus reset: FAILED
(sc=ffff8102157fc080)
Oct 18 21:01:07 redneck kernel: mptscsih: ioc0: attempting host reset!
(sc=ffff8102157fc080)
Oct 18 21:01:07 redneck kernel: mptbase: Initiating ioc0 recovery
Oct 18 21:01:21 redneck kernel: mptscsih: ioc0: host reset: SUCCESS
(sc=ffff8102157fc080)
Oct 18 21:01:21 redneck kernel: sd 0:0:0:0: scsi: Device offlined - not
ready after error recovery
Oct 18 21:01:21 redneck kernel: sd 0:0:0:0: scsi: Device offlined - not
ready after error recovery
Oct 18 21:01:21 redneck kernel: sd 0:0:0:0: rejecting I/O to offline device
where can be the problem ? in mptsas/mptscsih/mptbase driver or
dm-multipath ?
thanks
--
Pavel Stano
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
