Hi Nuno, I would suggest you to move the rdac specific configuration information to device section and retry. Are you running the multipathd command ? Here is how my rdac configuration looks in multipath.conf -------------------------- devices { device { vendor "IBM" product "1815" hardware_handler "1 rdac" path_checker rdac failback immediate path_grouping_policy group_by_prio prio_callout "/sbin/mpath_prio_tpc /dev/%n" } } ----------------------------- Let me know how it goes, chandra On Mon, 2007-09-24 at 14:39 +0100, Nuno Fernandes wrote: > Hi, > > We've bought and IBM BladecenterH and IBM DS4700 storage. > We are using Redhat Enterprise Linux 5 and we are trying to put multipath > working. > > RHEL5 we are using uses 2.6.18-8.1.3.el5xen. We've ported rdac patch > (http://kernel.org/pub/linux/kernel/people/agk/patches/2.6/2.6.21/dm-mpath-rdac.patch) > to RHEL5 kernel. We've also updated multipath-tools to support > mpath_prio_rdac. > > Our multipath.conf is: > > devnode_blacklist { > devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*" > devnode "^hd[a-z]" > devnode "^cciss!c[0-9]d[0-9]*" > #USB 4G Flash drive inside HS21 > devnode "sda" > } > > defaults { > multipath_tool "/sbin/multipath -v0" > udev_dir /dev > polling_interval 5 > default_selector "round-robin 0" > default_getuid_callout "/sbin/scsi_id -g -u -s /block/%n" > #default_prio_callout "/bin/true" > failback immediate > path_checker rdac > hardware_handler "1 rdac" > prio_callout "/sbin/mpath_prio_tpc /dev/%n" > path_grouping_policy group_by_prio > } > > multipaths { > multipath { > wwid 3600a0b8000320bea0000048f46e52137 > alias client_data > } > } > > When we start multipath -v2 it creates multipath devices. I can see 2 active > paths (active controler) and 2 ghost paths (standby controler). > When i unplug 2 active fibre that connect the fabric to DS4700, multipath > reports I/O errors and doesn't failover the controler. > > Any ideas? > > Thanks for any help > Nuno Fernandes > > -- > dm-devel mailing list > dm-devel@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/dm-devel -- ---------------------------------------------------------------------- Chandra Seetharaman | Be careful what you choose.... - sekharan@xxxxxxxxxx | .......you may get it. ---------------------------------------------------------------------- -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel