Hi!
It seems I can't create a multipath map to read-only device
in RedHat 5.0, while I was able to do so in RedHat 4.4.
When I change the device to disable write-protect, it's OK.
SCSI device sdf: 33554432 512-byte hdwr sectors (17180 MB)
sdf: Write Protect is on
SCSI device sdf: drive cache: write through
# ls -l /dev/sdf
brw-r----- 1 root disk 8, 80 Aug 20 16:37 /dev/sdf
# dmsetup --version
Library version: 1.02.13 (2006-11-28)
Driver version: 4.11.0
# dmsetup create qqq << EOF
> 0 33554432 multipath 0 0 1 1 round-robin 0 1 1 8:80 1000
> EOF
device-mapper: table: 253:11: multipath: error getting device
device-mapper: ioctl: error adding target to table
device-mapper: reload ioctl failed: Invalid argument
Command failed
When I remove write-protect from the device and rescan it, everything
is OK:
SCSI device sdf: 33554432 512-byte hdwr sectors (17180 MB)
sdf: Write Protect is off
SCSI device sdf: drive cache: write through
# dmsetup create qqq << EOF
> 0 33554432 multipath 0 0 1 1 round-robin 0 1 1 8:80 1000
> EOF
# dmsetup table qqq
0 33554432 multipath 0 0 1 1 round-robin 0 1 1 8:80 1000
Relevant strace:
fstat(4, {st_mode=S_IFREG|0644, st_size=58, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2aaaadfcc000
read(4, "0 33554432 multipath 0 0 1 1 rou"..., 4096) = 58
read(4, "", 4096) = 0
close(4) = 0
munmap(0x2aaaadfcc000, 4096) = 0
ioctl(3, DM_DEV_CREATE, 0x118d3ac0) = 0
ioctl(3, DM_TABLE_LOAD, 0x118d3ac0) = -1 EINVAL (Invalid argument)
What would you advise?
Thanks,
Maxim.
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
