Probably there was a tiny window when no paths where available. Check
'multipath -l' whether it shows
"queue_if_no_path" somewhere. If not, look at the "no_path_retry" keyword
in multipath.conf.
Mit freundlichem Gruß / Regards,
Stefan Bader
SW Linux on zSeries Development
Stefan.Bader@xxxxxxxxxx
IBM Deutschland Entwicklung GmbH
Vorsitzender des Aufsichtsrats: Martin Jetter
Geschäftsführung: Herbert Kircher
Sitz der Gesellschaft: Böblingen
Registergericht: Amtsgericht Stuttgart, HRB 243294
----------------------------------------------------------------------------------
When all other means of communication fail, try words.
dm-devel-bounces@xxxxxxxxxx wrote on 20.07.2007 20:03:36:
> Hello,
>
> We have a DF600F connected via 2 paths to a rhel5 server running
> device-mapper-multipath 0.4.7 from Red Hat. We are using pp_hds_modular
> v1.14 instead of mpath_prio_hds_modular that came with the package, as
it
> is only v1.12.
>
> When we disconnect a cable to an hba, the devices are all marked as
faulty
> and the other path is used and it recovers when the cable is
reconnected.
> However, on Tuesday the technician from Hitachi came to perform a
> microcode update. He first took controller 0 on the DF600F offline.
> multipath -ll reported the devices on that path as faulty and as active
> when the controller was back online. He then repeated the process with
> controller 1 and multipath also reported the devices on that path as
> faulty and then active when it was back online. But the postgresql
vacuum
> I was running during this time crashed with i/o errors and the
filesystem
> on the lvm2 volume was mounted in read-only mode.
>
> Below are the logs. The devices sdb, sdc, sdd and sde are on the
> controller 0 path and the devices sdf, sdg, sdh and sdi are on the
> controller 1 path. Any ideas why the multipathing
> didn't work?
>
> Jul 17 09:25:53 rhel5 multipathd: 1HITACHI_D60052410003: load table
> [0 348200960 multipath 0 0 2 1 round-robin 0 1 1 8:48 1000 round-
> robin 0 1 1 8:112 1000]
> Jul 17 09:25:53 rhel5 kernel: device-mapper: multipath: Failing path
8:16.
> Jul 17 09:25:53 rhel5 multipathd: 1HITACHI_D60052410004: load table
> [0 348205056 multipath 0 0 2 1 round-robin 0 1 1 8:128 1000 round-
> robin 0 1 1 8:64 1000]
> Jul 17 09:25:53 rhel5 multipathd: 1HITACHI_D60052410001: event
> checker started
> Jul 17 09:25:53 rhel5 multipathd: 1HITACHI_D60052410002: event
> checker started
> Jul 17 09:25:53 rhel5 multipathd: 1HITACHI_D60052410003: event
> checker started
> Jul 17 09:25:53 rhel5 multipathd: 1HITACHI_D60052410004: event
> checker started
> Jul 17 09:25:53 rhel5 multipathd: path checkers start up
> Jul 17 09:25:53 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:25:53 rhel5 multipathd: checker failed path 8:16 in map
> 1HITACHI_D60052410001
> Jul 17 09:25:53 rhel5 multipathd: 1HITACHI_D60052410001: remaining
> active paths: 1
> Jul 17 09:25:53 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:25:53 rhel5 kernel: device-mapper: multipath: Failing path
8:32.
> Jul 17 09:25:53 rhel5 multipathd: checker failed path 8:32 in map
> 1HITACHI_D60052410002
> Jul 17 09:25:53 rhel5 kernel: device-mapper: multipath: Failing path
8:48.
> Jul 17 09:25:53 rhel5 multipathd: 1HITACHI_D60052410002: remaining
> active paths: 1
> Jul 17 09:25:53 rhel5 kernel: device-mapper: multipath: Failing path
8:64.
> Jul 17 09:25:53 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:25:53 rhel5 multipathd: checker failed path 8:48 in map
> 1HITACHI_D60052410003
> Jul 17 09:25:53 rhel5 multipathd: 1HITACHI_D60052410003: remaining
> active paths: 1
> Jul 17 09:25:53 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:25:53 rhel5 multipathd: checker failed path 8:64 in map
> 1HITACHI_D60052410004
> Jul 17 09:25:53 rhel5 multipathd: 1HITACHI_D60052410004: remaining
> active paths: 1
> Jul 17 09:25:58 rhel5 multipathd: sdb: readsector0 checker reports path
is up
> Jul 17 09:25:58 rhel5 multipathd: 8:16: reinstated
> Jul 17 09:25:58 rhel5 multipathd: 1HITACHI_D60052410001: remaining
> active paths: 2
> Jul 17 09:25:58 rhel5 multipathd: sdc: readsector0 checker reports path
is up
> Jul 17 09:25:58 rhel5 multipathd: 8:32: reinstated
> Jul 17 09:25:58 rhel5 multipathd: 1HITACHI_D60052410002: remaining
> active paths: 2
> Jul 17 09:25:58 rhel5 multipathd: sdd: readsector0 checker reports path
is up
> Jul 17 09:25:58 rhel5 multipathd: 8:48: reinstated
> Jul 17 09:25:58 rhel5 multipathd: 1HITACHI_D60052410003: remaining
> active paths: 2
> Jul 17 09:25:58 rhel5 multipathd: sde: readsector0 checker reports path
is up
> Jul 17 09:25:58 rhel5 multipathd: 8:64: reinstated
> Jul 17 09:25:58 rhel5 multipathd: 1HITACHI_D60052410004: remaining
> active paths: 2
> Jul 17 09:26:34 rhel5 kernel: lpfc 0000:04:00.0: 0:1305 Link Down
> Event x2 received Data: x2 x20 x0
> Jul 17 09:26:35 rhel5 kernel: lpfc 0000:04:00.0: 0:1303 Link Up
> Event x3 received Data: x3 x1 x4 x1
> Jul 17 09:27:04 rhel5 kernel: rport-1:0-0: blocked FC remote port
> time out: saving binding
> Jul 17 09:27:04 rhel5 kernel: lpfc 0000:04:00.0: 0:0203 Devloss
> timeout on WWPN 50:6:e:80:0:43:b8:91 NPort xe8 Data: x8 x7 x1
> Jul 17 09:27:04 rhel5 kernel: device-mapper: multipath: Failing path
8:16.
> Jul 17 09:27:04 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:27:04 rhel5 multipathd: checker failed path 8:16 in map
> 1HITACHI_D60052410001
> Jul 17 09:27:04 rhel5 multipathd: 1HITACHI_D60052410001: remaining
> active paths: 1
> Jul 17 09:27:04 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:27:04 rhel5 multipathd: checker failed path 8:32 in map
> 1HITACHI_D60052410002
> Jul 17 09:27:04 rhel5 kernel: device-mapper: multipath: Failing path
8:32.
> Jul 17 09:27:04 rhel5 multipathd: 1HITACHI_D60052410002: remaining
> active paths: 1
> Jul 17 09:27:04 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:27:04 rhel5 multipathd: checker failed path 8:48 in map
> 1HITACHI_D60052410003
> Jul 17 09:27:04 rhel5 kernel: device-mapper: multipath: Failing path
8:48.
> Jul 17 09:27:04 rhel5 multipathd: 1HITACHI_D60052410003: remaining
> active paths: 1
> Jul 17 09:27:04 rhel5 kernel: device-mapper: multipath: Failing path
8:64.
> Jul 17 09:27:09 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:27:09 rhel5 multipathd: checker failed path 8:64 in map
> 1HITACHI_D60052410004
> Jul 17 09:27:09 rhel5 multipathd: 1HITACHI_D60052410004: remaining
> active paths: 1
> Jul 17 09:27:09 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:27:09 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:27:09 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:27:09 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:27:14 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:27:14 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:27:14 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:27:14 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:27:18 rhel5 kernel: lpfc 0000:04:00.0: 0:1305 Link Down
> Event x4 received Data: x4 x20 x0
> Jul 17 09:27:19 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:27:19 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:27:19 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:27:19 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:27:24 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:27:24 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:27:24 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:27:24 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:27:29 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:27:29 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:27:29 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:27:29 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:27:34 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:27:34 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:27:34 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:27:34 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:27:39 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:27:39 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:27:39 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:27:39 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:27:43 rhel5 kernel: lpfc 0000:04:00.0: 0:1303 Link Up
> Event x5 received Data: x5 x1 x4 x1
> Jul 17 09:27:44 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:27:49 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:27:49 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:27:49 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:27:49 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:27:49 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:27:49 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:27:49 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:27:54 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:27:59 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:27:59 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:27:59 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:27:59 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:27:59 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:27:59 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:27:59 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:28:04 rhel5 kernel: lpfc 0000:04:00.0: 0:1305 Link Down
> Event x6 received Data: x6 x20 x0
> Jul 17 09:28:04 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:28:04 rhel5 kernel: lpfc 0000:04:00.0: 0:1303 Link Up
> Event x7 received Data: x7 x1 x4 x1
> Jul 17 09:28:07 rhel5 kernel: lpfc 0000:04:00.0: 0:1305 Link Down
> Event x8 received Data: x8 x20 x0
> Jul 17 09:28:08 rhel5 kernel: lpfc 0000:04:00.0: 0:1303 Link Up
> Event x9 received Data: x9 x1 x8 x1
> Jul 17 09:28:08 rhel5 kernel: lpfc 0000:04:00.0: 0:1305 Link Down
> Event xa received Data: xa x20 x0
> Jul 17 09:28:09 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:28:09 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:28:09 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:28:09 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:28:09 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:28:09 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:28:09 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:28:10 rhel5 kernel: lpfc 0000:04:00.0: 0:1303 Link Up
> Event xb received Data: xb x1 x4 x1
> Jul 17 09:28:14 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:28:19 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:28:19 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:28:19 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:28:19 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:28:19 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:28:19 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:28:19 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:28:24 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:28:24 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:28:24 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:28:24 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:28:24 rhel5 multipathd: sdh: readsector0 checker reports
> path is down
> Jul 17 09:28:24 rhel5 multipathd: checker failed path 8:112 in map
> 1HITACHI_D60052410003
> Jul 17 09:28:24 rhel5 multipathd: 1HITACHI_D60052410003: remaining
> active paths: 0
> Jul 17 09:28:24 rhel5 kernel: device-mapper: multipath: Failing path
8:112.
> Jul 17 09:28:24 rhel5 kernel: device-mapper: multipath: Failing path
8:128.
> Jul 17 09:28:24 rhel5 multipathd: sdi: readsector0 checker reports
> path is down
> Jul 17 09:28:24 rhel5 multipathd: checker failed path 8:128 in map
> 1HITACHI_D60052410004
> Jul 17 09:28:24 rhel5 multipathd: 1HITACHI_D60052410004: remaining
> active paths: 0
> Jul 17 09:28:24 rhel5 kernel: lpfc 0000:04:00.0: 0:1305 Link Down
> Event xc received Data: xc x20 x0
> Jul 17 09:28:29 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:28:29 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:28:29 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:28:29 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:28:29 rhel5 multipathd: sdh: readsector0 checker reports path
is up
> Jul 17 09:28:29 rhel5 multipathd: 8:112: reinstated
> Jul 17 09:28:29 rhel5 multipathd: 1HITACHI_D60052410003: remaining
> active paths: 1
> Jul 17 09:28:29 rhel5 multipathd: sdi: readsector0 checker reports path
is up
> Jul 17 09:28:29 rhel5 multipathd: 8:128: reinstated
> Jul 17 09:28:29 rhel5 multipathd: 1HITACHI_D60052410004: remaining
> active paths: 1
> Jul 17 09:28:34 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:28:39 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:28:39 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:28:39 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:28:39 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:28:39 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:28:39 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:28:39 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:28:44 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:28:44 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:28:44 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:28:44 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:28:49 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:28:49 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:28:49 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:28:49 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:28:54 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:28:54 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:28:54 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:28:54 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:28:59 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:28:59 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:28:59 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:28:59 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:29:04 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:29:04 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:29:04 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:29:04 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:29:09 rhel5 kernel: lpfc 0000:04:00.0: 0:1303 Link Up
> Event xd received Data: xd x1 x8 x2
> Jul 17 09:29:09 rhel5 multipathd: sdb: readsector0 checker reports
> path is down
> Jul 17 09:29:10 rhel5 multipathd: sdc: readsector0 checker reports
> path is down
> Jul 17 09:29:10 rhel5 multipathd: sdd: readsector0 checker reports
> path is down
> Jul 17 09:29:10 rhel5 multipathd: sde: readsector0 checker reports
> path is down
> Jul 17 09:29:15 rhel5 multipathd: sdb: readsector0 checker reports path
is up
> Jul 17 09:29:15 rhel5 multipathd: 8:16: reinstated
> Jul 17 09:29:15 rhel5 multipathd: 1HITACHI_D60052410001: remaining
> active paths: 2
> Jul 17 09:29:15 rhel5 multipathd: sdc: readsector0 checker reports path
is up
> Jul 17 09:29:15 rhel5 multipathd: 8:32: reinstated
> Jul 17 09:29:15 rhel5 multipathd: 1HITACHI_D60052410002: remaining
> active paths: 2
> Jul 17 09:29:15 rhel5 multipathd: sdd: readsector0 checker reports path
is up
> Jul 17 09:29:15 rhel5 multipathd: 8:48: reinstated
> Jul 17 09:29:15 rhel5 multipathd: 1HITACHI_D60052410003: remaining
> active paths: 2
> Jul 17 09:29:15 rhel5 multipathd: sde: readsector0 checker reports path
is up
> Jul 17 09:29:15 rhel5 multipathd: 8:64: reinstated
> Jul 17 09:29:15 rhel5 multipathd: 1HITACHI_D60052410004: remaining
> active paths: 2
> Jul 17 09:32:39 rhel5 kernel: lpfc 0000:05:00.0: 1:1305 Link Down
> Event x2 received Data: x2 x20 x0
> Jul 17 09:32:41 rhel5 kernel: lpfc 0000:05:00.0: 1:1303 Link Up
> Event x3 received Data: x3 x1 x4 x1
> Jul 17 09:33:09 rhel5 kernel: rport-2:0-0: blocked FC remote port
> time out: saving binding
> Jul 17 09:33:09 rhel5 kernel: sd 2:0:0:1: SCSI error: return code =
0x00010000
> Jul 17 09:33:09 rhel5 kernel: end_request: I/O error, dev sdf, sector
65184640
> Jul 17 09:33:09 rhel5 kernel: lpfc 0000:05:00.0: 1:0203 Devloss
> timeout on WWPN 50:6:e:80:0:43:b8:93 NPort xe2 Data: x8 x7 x1
> Jul 17 09:33:09 rhel5 kernel: sd 2:0:0:1: SCSI error: return code =
0x00010000
> Jul 17 09:33:09 rhel5 kernel: end_request: I/O error, dev sdf, sector
65920
> Jul 17 09:33:09 rhel5 kernel: sd 2:0:0:1: SCSI error: return code =
0x00010000
> Jul 17 09:33:09 rhel5 multipathd: sdf: readsector0 checker reports
> path is down
> Jul 17 09:33:09 rhel5 kernel: end_request: I/O error, dev sdf, sector
21410968
> Jul 17 09:33:09 rhel5 kernel: sd 2:0:0:1: SCSI error: return code =
0x00010000
> Jul 17 09:33:09 rhel5 kernel: end_request: I/O error, dev sdf, sector
18297136
> Jul 17 09:33:09 rhel5 multipathd: checker failed path 8:80 in map
> 1HITACHI_D60052410001
> Jul 17 09:33:09 rhel5 kernel: Buffer I/O error on device dm-0,
> logical block 4574198
> Jul 17 09:33:09 rhel5 multipathd: 1HITACHI_D60052410001: remaining
> active paths: 1
> Jul 17 09:33:09 rhel5 kernel: lost page write due to I/O error on dm-0
> Jul 17 09:33:10 rhel5 kernel: sd 2:0:0:1: SCSI error: return code =
0x00010000
> Jul 17 09:33:10 rhel5 kernel: end_request: I/O error, dev sdf, sector
18300736
> Jul 17 09:33:10 rhel5 kernel: Buffer I/O error on device dm-0,
> logical block 4575096
> Jul 17 09:33:10 rhel5 kernel: lost page write due to I/O error on dm-0
> Jul 17 09:33:10 rhel5 kernel: Buffer I/O error on device dm-0,
> logical block 4575097
> Jul 17 09:33:10 rhel5 kernel: lost page write due to I/O error on dm-0
> Jul 17 09:33:10 rhel5 kernel: Buffer I/O error on device dm-0,
> logical block 4575098
> Jul 17 09:33:10 rhel5 kernel: lost page write due to I/O error on dm-0
> Jul 17 09:33:10 rhel5 kernel: sd 2:0:0:1: SCSI error: return code =
0x00010000
> Jul 17 09:33:10 rhel5 kernel: end_request: I/O error, dev sdf, sector
18300928
> Jul 17 09:33:10 rhel5 kernel: Buffer I/O error on device dm-0,
> logical block 4575152
> Jul 17 09:33:10 rhel5 kernel: lost page write due to I/O error on dm-0
> Jul 17 09:33:10 rhel5 kernel: Buffer I/O error on device dm-0,
> logical block 4575153
> Jul 17 09:33:10 rhel5 kernel: lost page write due to I/O error on dm-0
> Jul 17 09:33:10 rhel5 kernel: device-mapper: multipath: Failing path
8:80.
> Jul 17 09:33:10 rhel5 kernel: sd 2:0:0:1: SCSI error: return code =
0x00010000
> Jul 17 09:33:10 rhel5 kernel: end_request: I/O error, dev sdf, sector
18301184
> Jul 17 09:33:10 rhel5 kernel: Buffer I/O error on device dm-0,
> logical block 4575216
> Jul 17 09:33:10 rhel5 kernel: lost page write due to I/O error on dm-0
> Jul 17 09:33:10 rhel5 kernel: Buffer I/O error on device dm-0,
> logical block 4575217
> Jul 17 09:33:10 rhel5 kernel: lost page write due to I/O error on dm-0
> Jul 17 09:33:10 rhel5 kernel: Buffer I/O error on device dm-0,
> logical block 4575218
> Jul 17 09:33:10 rhel5 kernel: lost page write due to I/O error on dm-0
> Jul 17 09:33:10 rhel5 kernel: Buffer I/O error on device dm-0,
> logical block 4575219
> Jul 17 09:33:10 rhel5 kernel: lost page write due to I/O error on dm-0
> Jul 17 09:33:10 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:10 rhel5 kernel: end_request: I/O error, dev sdg, sector
66008
> Jul 17 09:33:10 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:10 rhel5 kernel: end_request: I/O error, dev sdg, sector
18300672
> Jul 17 09:33:10 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:10 rhel5 kernel: end_request: I/O error, dev sdg, sector
18300824
> Jul 17 09:33:10 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:10 rhel5 kernel: end_request: I/O error, dev sdg, sector
18300896
> Jul 17 09:33:10 rhel5 kernel: sd 2:0:0:1: SCSI error: return code =
0x00010000
> Jul 17 09:33:10 rhel5 kernel: end_request: I/O error, dev sdf, sector
66008
> Jul 17 09:33:10 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:10 rhel5 kernel: end_request: I/O error, dev sdg, sector
18300936
> Jul 17 09:33:10 rhel5 kernel: Aborting journal on device dm-0.
> Jul 17 09:33:10 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:10 rhel5 kernel: end_request: I/O error, dev sdg, sector
18301184
> Jul 17 09:33:10 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:10 rhel5 kernel: end_request: I/O error, dev sdg, sector
18301360
> Jul 17 09:33:10 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:10 rhel5 kernel: end_request: I/O error, dev sdg, sector
18301520
> Jul 17 09:33:10 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:10 rhel5 kernel: end_request: I/O error, dev sdg, sector
18334080
> Jul 17 09:33:10 rhel5 kernel: sd 2:0:0:4: SCSI error: return code =
0x00010000
> Jul 17 09:33:10 rhel5 kernel: end_request: I/O error, dev sdi, sector
19444000
> Jul 17 09:33:10 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:10 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411072
> Jul 17 09:33:10 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:11 rhel5 kernel: end_request: I/O error, dev sdg, sector
65184640
> Jul 17 09:33:11 rhel5 kernel: sd 2:0:0:4: SCSI error: return code =
0x00010000
> Jul 17 09:33:11 rhel5 kernel: end_request: I/O error, dev sdi, sector
19449856
> Jul 17 09:33:11 rhel5 kernel: sd 2:0:0:3: SCSI error: return code =
0x00010000
> Jul 17 09:33:11 rhel5 kernel: end_request: I/O error, dev sdh, sector
19450272
> Jul 17 09:33:11 rhel5 kernel: sd 2:0:0:1: SCSI error: return code =
0x00010000
> Jul 17 09:33:11 rhel5 kernel: end_request: I/O error, dev sdf, sector
65184592
> Jul 17 09:33:11 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:11 rhel5 kernel: end_request: I/O error, dev sdg, sector
65184512
> Jul 17 09:33:11 rhel5 kernel: sd 2:0:0:4: SCSI error: return code =
0x00010000
> Jul 17 09:33:11 rhel5 kernel: end_request: I/O error, dev sdi, sector
19450368
> Jul 17 09:33:11 rhel5 kernel: sd 2:0:0:3: SCSI error: return code =
0x00010000
> Jul 17 09:33:11 rhel5 kernel: end_request: I/O error, dev sdh, sector
19449760
> Jul 17 09:33:11 rhel5 kernel: sd 2:0:0:1: SCSI error: return code =
0x00010000
> Jul 17 09:33:11 rhel5 kernel: end_request: I/O error, dev sdf, sector
65184464
> Jul 17 09:33:11 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:11 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:11 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:11 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:11 rhel5 kernel: device-mapper: multipath: Failing path
8:96.
> Jul 17 09:33:11 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:11 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:11 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:11 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:11 rhel5 kernel: device-mapper: multipath: Failing path
8:112.
> Jul 17 09:33:11 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:11 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:11 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:11 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:11 rhel5 kernel: device-mapper: multipath: Failing path
8:128.
> Jul 17 09:33:11 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:11 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:11 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:11 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:11 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:11 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:11 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:11 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:11 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:11 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:11 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:11 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:11 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:11 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:11 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:11 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:11 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:11 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:11 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:11 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:11 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:11 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:11 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:12 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:12 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:12 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:12 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:12 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:12 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:12 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:12 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:12 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:12 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:12 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:12 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:12 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:12 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:12 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:12 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:12 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:12 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:12 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:12 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:12 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:12 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:12 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:12 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:12 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:12 rhel5 kernel: sd 2:0:0:2: SCSI error: return code =
0x00010000
> Jul 17 09:33:12 rhel5 kernel: end_request: I/O error, dev sdg, sector
21411096
> Jul 17 09:33:12 rhel5 kernel: ext3_abort called.
> Jul 17 09:33:12 rhel5 kernel: EXT3-fs error (device dm-0):
> ext3_journal_start_sb: Detected aborted journal
> Jul 17 09:33:12 rhel5 kernel: Remounting filesystem read-only
>
> The scsi and i/o errors repeat until the machine was rebooted when all
was
> fine again.
>
> Here is the contents of /etc/multipath.conf:
>
> # This is an example configuration file for device mapper multipath.
> # For a complete list of the default configuration values, see
> # /usr/share/doc/device-mapper-multipath-0.4.5/multipath.conf.defaults
> # For a list of configuration options with descriptions, see
> # /usr/share/doc/device-mapper-multipath-0.4.5/multipath.conf.annotated
>
>
> # Blacklist all devices by default. Remove this to enable multipathing
> # on the default devices.
> blacklist {
> devnode "sda"
> }
>
> ## By default, devices with vendor = "IBM" and product = "S/390.*" are
> ## blacklisted. To enable mulitpathing on these devies, uncomment the
> ## following lines.
> #blacklist_exceptions {
> # device {
> # vendor "IBM"
> # product "S/390.*"
> # }
> #}
>
> ## Use user friendly names, instead of using WWIDs as names.
> defaults {
> #user_friendly_names yes
> }
>
> devices {
> device {
> vendor "HITACHI"
> product "DF.*"
> path_grouping_policy group_by_prio
> prio_callout "/sbin/pp_hds_modular %d"
> path_checker readsector0
> getuid_callout "/sbin/scsi_id -g -u -s /block/%n"
> failback immediate
> }
> }
>
>
>
> Any help is appreciated.
>
> Thanks,
>
> Trevor
>
> --
> dm-devel mailing list
> dm-devel@xxxxxxxxxx
> https://www.redhat.com/mailman/listinfo/dm-devel
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
