On Monday May 28, davidsen@xxxxxxx wrote: > There are two things I'm not sure you covered. > > First, disks which don't support flush but do have a "cache dirty" > status bit you can poll at times like shutdown. If there are no drivers > which support these, it can be ignored. There are really devices like that? So to implement a flush, you have to stop sending writes and wait and poll - maybe poll every millisecond? That wouldn't be very good for performance.... maybe you just wouldn't bother with barriers on that sort of device? Which reminds me: What is the best way to turn off barriers? Several filesystems have "-o nobarriers" or "-o barriers=0", or the inverse. md/raid currently uses barriers to write metadata, and there is no way to turn that off. I'm beginning to wonder if that is best. Maybe barrier support should be a function of the device. i.e. the filesystem or whatever always sends barrier requests where it thinks it is appropriate, and the block device tries to honour them to the best of its ability, but if you run blockdev --enforce-barriers=no /dev/sda then you lose some reliability guarantees, but gain some throughput (a bit like the 'async' export option for nfsd). > > Second, NAS (including nbd?). Is there enough information to handle this > "really rigt?" NAS means lots of things, including NFS and CIFS where this doesn't apply. For 'nbd', it is entirely up to the protocol. If the protocol allows a barrier flag to be sent to the server, then barriers should just work. If it doesn't, then either the server disables write-back caching, or flushes every request, or you lose all barrier guarantees. For 'iscsi', I guess it works just the same as SCSI... NeilBrown -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
