Is it correct that if an LUN is seen over 2 Paths,
1 active 1 standby i cannot fdisk the standby device?
#multipath -l
(3600601604032190097fd5fbefd22db11)
[size=11 GB][features="1 queue_if_no_path"][hwhandler="1 emc"]
\_ round-robin 0 [active]
\_ 3:0:0:7 sdi 8:128 [active][ready]
\_ round-robin 0 [enabled]
\_ 3:0:1:7 sdq 65:0 [active][ready]
#fdisk -l /dev/sdi
Disk /dev/sdi: 11.8 GB, 11811160064 bytes
255 heads, 63 sectors/track, 1435 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdi1 1 1435 11526606 83 Linux
#fdisk -l /dev/sdq
--> creates in /var/log/messages
Sep 28 12:01:22 saptf2 kernel: end_request: I/O error, dev sdq, sector 0
Sep 28 12:01:22 saptf2 kernel: Buffer I/O error on device sdq, logical block 0
Regards Manuel Herr
-- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
