dm-devel-bounces@xxxxxxxxxx wrote on 09/10/2006 03:23:55 PM: > Heya, > > Just to make sure that I've covered everything I partitioned the > > disk as /dev/sdc and then used lvm2 command: > > > sorry, I've missed that before. /dev/sdc is only _one_ of your paths > to a LUN. multipath will take the right 2 of those sd* to create one > dm device file. Have a look if there's somethign in /dev/mapper, also > check your udev rules, you need this line in there: > > KERNEL=="dm-[0-9]*", PROGRAM="/sbin/devmap_name %M %m", NAME="%k", > SYMLINK="%c" > > most distros have a line like > #KERNEL=="dm-[0-9]*", NAME="" > in there, you need to comment it out if you add the lien above. > > > Hope that helped, > > best regards > > Bernd Zeimetz Bernd, I haven't had a chance to work on this for a couple of days but I did get do some reading. I'm wondering if I'm using the correct driver for this. I have been trying to use the QLogic driver shipped with SLES. Should I be using the non-EMC driver from the Qlogic website? Regards, John -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
