Frederic TEMPORELLI wrote:
Hello,
When using multipath-tools 0.4.7, I would like to reports that DDN
S2A8500 disk array reports a wrong status whith 'readsector0' checker.
'directio' seems to be the right checker for such storage system (see
following logs).
Can you update hwtable.c in this way ?
multipathd logs when using 'readsector0':
[root@iotiger2 ~]# multipathd -d -v3
Jul 26 10:53:59 | --------start up--------
Jul 26 10:53:59 | read /etc/multipath.conf
Jul 26 10:53:59 | dm-0: blacklisted
Jul 26 10:53:59 | dm-1: blacklisted
Jul 26 10:53:59 | dm-2: blacklisted
Jul 26 10:53:59 | dm-3: blacklisted
Jul 26 10:53:59 | hda: blacklisted
Jul 26 10:53:59 | loop0: blacklisted
Jul 26 10:53:59 | loop1: blacklisted
Jul 26 10:53:59 | loop2: blacklisted
Jul 26 10:53:59 | loop3: blacklisted
Jul 26 10:53:59 | loop4: blacklisted
Jul 26 10:53:59 | loop5: blacklisted
Jul 26 10:53:59 | loop6: blacklisted
Jul 26 10:53:59 | loop7: blacklisted
Jul 26 10:53:59 | ram0: blacklisted
Jul 26 10:53:59 | ram1: blacklisted
Jul 26 10:53:59 | ram2: blacklisted
...
Jul 26 10:53:59 | sdc: not found in pathvec
Jul 26 10:53:59 | sdc: mask = 0x1f
Jul 26 10:53:59 | sdc: bus = 1
Jul 26 10:53:59 | sdc: dev_t = 8:32
Jul 26 10:53:59 | sdc: size = 571416576
Jul 26 10:53:59 | sdc: vendor = DDN
Jul 26 10:53:59 | sdc: product = S2A 8500
Jul 26 10:53:59 | sdc: rev = 5.22
Jul 26 10:53:59 | sdc: h:b:t:l = 4:0:0:0
Jul 26 10:53:59 | sdc: tgt_node_name = 0x20000001ff0302a8
Jul 26 10:53:59 | sdc: serial =
Jul 26 10:53:59 | sdc: path checker = readsector0 (config file default)
Jul 26 10:53:59 | sdc: state = 1
Jul 26 10:53:59 | sdc: checker msg is "readsector0 checker reports path
is down"
Jul 26 10:53:59 | sdc: getuid = /sbin/scsi_id -g -u -s /block/%n (config
file default)
Jul 26 10:53:59 | sdc: uid = 360001ff02002110102a8fe1c220f0100 (callout)
Jul 26 10:53:59 | sdd: not found in pathvec
Jul 26 10:53:59 | sdd: mask = 0x1f
Jul 26 10:53:59 | sdd: bus = 1
Jul 26 10:53:59 | sdd: dev_t = 8:48
Jul 26 10:53:59 | sdd: size = 571416576
Jul 26 10:53:59 | sdd: vendor = DDN
Jul 26 10:53:59 | sdd: product = S2A 8500
Jul 26 10:53:59 | sdd: rev = 5.22
Jul 26 10:53:59 | sdd: h:b:t:l = 4:0:0:1
Jul 26 10:53:59 | sdd: tgt_node_name = 0x20000001ff0302a8
Jul 26 10:53:59 | sdd: serial =
Jul 26 10:53:59 | sdd: path checker = readsector0 (config file default)
Jul 26 10:53:59 | sdd: state = 1
Jul 26 10:53:59 | sdd: checker msg is "readsector0 checker reports path
is down"
Jul 26 10:53:59 | sdd: getuid = /sbin/scsi_id -g -u -s /block/%n (config
file default)
Jul 26 10:53:59 | sdd: uid = 360001ff02002110102a8fe20220f0300 (callout)
Jul 26 10:53:59 | sde: not found in pathvec
...
then, multipathd logs when using 'directio':
Jul 26 10:56:09 | --------start up--------
Jul 26 10:56:09 | read /etc/multipath.conf
Jul 26 10:56:09 | dm-0: blacklisted
Jul 26 10:56:09 | dm-1: blacklisted
Jul 26 10:56:09 | dm-2: blacklisted
Jul 26 10:56:09 | dm-3: blacklisted
Jul 26 10:56:09 | dm-4: blacklisted
Jul 26 10:56:09 | hda: blacklisted
Jul 26 10:56:09 | loop0: blacklisted
Jul 26 10:56:09 | loop1: blacklisted
Jul 26 10:56:09 | loop2: blacklisted
Jul 26 10:56:09 | loop3: blacklisted
Jul 26 10:56:09 | loop4: blacklisted
Jul 26 10:56:09 | loop5: blacklisted
Jul 26 10:56:09 | loop6: blacklisted
Jul 26 10:56:09 | loop7: blacklisted
Jul 26 10:56:09 | ram0: blacklisted
Jul 26 10:56:09 | ram1: blacklisted
Jul 26 10:56:09 | ram2: blacklisted
...
Jul 26 10:56:09 | sdc: not found in pathvec
Jul 26 10:56:09 | sdc: mask = 0x1f
Jul 26 10:56:09 | sdc: bus = 1
Jul 26 10:56:09 | sdc: dev_t = 8:32
Jul 26 10:56:09 | sdc: size = 571416576
Jul 26 10:56:09 | sdc: vendor = DDN
Jul 26 10:56:09 | sdc: product = S2A 8500
Jul 26 10:56:09 | sdc: rev = 5.22
Jul 26 10:56:09 | sdc: h:b:t:l = 4:0:0:0
Jul 26 10:56:09 | sdc: tgt_node_name = 0x20000001ff0302a8
Jul 26 10:56:09 | sdc: serial =
Jul 26 10:56:09 | sdc: path checker = directio (config file default)
Jul 26 10:56:09 | sdc: state = 0
Jul 26 10:56:09 | sdc: getprio = /bin/true (config file default)
Jul 26 10:56:09 | sdc: prio = 0
Jul 26 10:56:09 | sdc: getuid = /sbin/scsi_id -g -u -s /block/%n (config
file default)
Jul 26 10:56:09 | sdc: uid = 360001ff02002110102a8fe1c220f0100 (callout)
Jul 26 10:56:09 | sdd: not found in pathvec
Jul 26 10:56:09 | sdd: mask = 0x1f
Jul 26 10:56:09 | sdd: bus = 1
Jul 26 10:56:09 | sdd: dev_t = 8:48
Jul 26 10:56:09 | sdd: size = 571416576
Jul 26 10:56:09 | sdd: vendor = DDN
Jul 26 10:56:09 | sdd: product = S2A 8500
Jul 26 10:56:09 | sdd: rev = 5.22
Jul 26 10:56:09 | sdd: h:b:t:l = 4:0:0:1
Jul 26 10:56:09 | sdd: tgt_node_name = 0x20000001ff0302a8
Jul 26 10:56:09 | sdd: serial =
Jul 26 10:56:09 | sdd: path checker = directio (config file default)
Jul 26 10:56:09 | sdd: state = 0
Jul 26 10:56:09 | sdd: getprio = /bin/true (config file default)
Jul 26 10:56:09 | sdd: prio = 0
Jul 26 10:56:09 | sdd: getuid = /sbin/scsi_id -g -u -s /block/%n (config
file default)
Jul 26 10:56:09 | sdd: uid = 360001ff02002110102a8fe20220f0300 (callout)
Jul 26 10:56:09 | sde: not found in pathvec
Jul 26 10:56:09 | sde: mask = 0x1f
Jul 26 10:56:09 | sde: bus = 1
Jul 26 10:56:09 | sde: dev_t = 8:64
Jul 26 10:56:09 | sde: size = 571416576
Jul 26 10:56:09 | sde: vendor = DDN
Jul 26 10:56:09 | sde: product = S2A 8500
Jul 26 10:56:09 | sde: rev = 5.22
Jul 26 10:56:09 | sde: h:b:t:l = 4:0:0:2
Jul 26 10:56:09 | sde: tgt_node_name = 0x20000001ff0302a8
Jul 26 10:56:09 | sde: serial =
Jul 26 10:56:09 | sde: path checker = directio (config file default)
Jul 26 10:56:09 | sde: state = 0
Jul 26 10:56:09 | sde: getprio = /bin/true (config file default)
Jul 26 10:56:09 | sde: prio = 0
Jul 26 10:56:09 | sde: getuid = /sbin/scsi_id -g -u -s /block/%n (config
file default)
Jul 26 10:56:09 | sde: uid = 360001ff02002110102a8fe24220f0500 (callout)
...
Have you tested the 'tur' checker?
I'd generally prefer that one as it doesn't require a disk read ...
Cheers,
Hannes
--
Dr. Hannes Reinecke hare@xxxxxxx
SuSE Linux Products GmbH S390 & zSeries
Maxfeldstraße 5 +49 911 74053 688
90409 Nürnberg http://www.suse.de
--
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
