oops, needed a comma after "can": On Thu, 2006-08-03 at 15:41 -0400, Eddie Williams wrote: > If you can, upgrade to 4.004 firmware. This makes the EVA active/active > and perhaps will resolve your problems. It definitely makes it work > better! > > Eddie > On Thu, 2006-08-03 at 12:29 -0500, Ed Wilts wrote: > > On Thu, Aug 03, 2006 at 02:54:47PM +0100, Dave Holland wrote: > > > I have a problem with multipath-tools 0.4.7 (I also tried the latest > > > "git" version) running on Debian (mix of stable/unstable), kernel > > > 2.6.17-1-amd64-k8, libdevmapper 1.02.07-1, udev 0.093-1. The machine is > > > a HP DL385 with QLA2312 FC card. > > > > > > Basically, at boot time, multipath does not recognise all the paths. The > > > underlying LUNs are visible, the mid-layer allocates /dev/sd* device > > > names, but not all the paths are not used: > > > > > > newftp1b:~# lsscsi -d | grep ':1]' > > > [0:0:0:1] disk COMPAQ HSV110 (C)COMPAQ 3028 /dev/sda[8:0] > > > [0:0:1:1] disk COMPAQ HSV110 (C)COMPAQ 3028 /dev/sdi[8:128] > > > [1:0:0:1] disk COMPAQ HSV110 (C)COMPAQ 3028 /dev/sdq[65:0] > > > [1:0:1:1] disk COMPAQ HSV110 (C)COMPAQ 3028 /dev/sdy[65:128] > > > > The EVAs are strange beasts... You are running an EVA5000 with firmware > > 3.028. That makes it an active/passive controller. In addition, > > although each HSV controller in the EVA has 2 paths to each fabric, only > > 1 path is actually ever used and the other is there in case the first > > fails. So...your storage is really available on only 1 of the 4 paths. > > > > My personal solution to the EVAs on Linux is to just use the qlogic > > failover driver. It just works. That's not to say that there isn't a > > problem in the multipath software - I'm just saying that you don't need > > the multipath suite to make stuff work (in this case). > > > > .../Ed > > > > -- > > dm-devel@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/dm-devel -- dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
