> -----Original Message----- > From: linux-scsi-owner@xxxxxxxxxxxxxxx > [mailto:linux-scsi-owner@xxxxxxxxxxxxxxx] On Behalf Of Hannes Reinecke > Sent: Friday, July 21, 2006 7:41 AM > To: Mike Christie > Cc: dm-devel@xxxxxxxxxx; linux-scsi@xxxxxxxxxxxxxxx; agk@xxxxxxxxxx > Subject: Re: [PATCH RFC] move scsi parts of dm hw handlers to > scsi layer > > Am Fr 21.07.2006 13:20 schrieb Mike Christie <michaelc@xxxxxxxxxxx>: > > > Currently dm-multipath has what it calls hw_handlers that contain hw > > details and currently those handlers can be used to failover storage > > works, LSI/Engenio RDAC mode, and EMC Clariion boxes. This code is a > > little strange in dm-multipath and they are doing scsi no > good (think > > about problems initializing scsi disks/paths when they are in a > > passive > > path that requires explicit/manual activation and we retry over and > > over > > and over). > > > Yes, good idea. And it would even solve the problem of > getting all this > weird > error messages during booting as now these handlers are > independently of > of > the multipathing configuration and we're now able to handle > weird path > configurations natively. > > > The patch below begins to push the scsi hw handler code down to the > > scsi > > layer. I only began to covert dm-emc.c and it only hooks in at the > > sense > > decoding in scsi_error.c. I wanted to make sure I was going > about the > > module loading and binding correctly. With a new target bus we could > > do > > some driver model stuff instead, but I was not sure if that was > > appropriate for this? > > > Why don't we use scsi_devinfo for this? > We have to have some sort of device table anyway as these handlers are > far from being generic, so any sense code which triggers action on one > device might be perfectly ok for others. > > Easiest way would be to have one BLIST flag for each hardware handler > and merge the respective hardware handler into that target if the > blacklist entry matches. > > > Next up would be to get Jens's cmd type tree and work on the message > > passing code. > > > > And this patch currently does not work since I do not have > a Clariion > > box and I do not know what to match for the {vendor, model} tuple. I > > think it was something like DCG or DGC and the model had different > > RAID > > strings depending on how it was setup and could have some > other string > > if it did not use RAID. If you have a Clariion or you work > for EMC and > > happen to know this info could you pass those strings to me? > > > IIRC this is > > 'DGC' 'DISK' > 'DGC' 'RAID 10' > 'DGC' 'RAID 5' And 'DGC' 'LUNZ' What about supporting a wildcard model string? > > Hrmph. There is one bit which doesn't quite work out. > While the hardware handler knows how to handle error codes and how to > switch > paths for a specific device, it doesn't know _when_ to switch it. > I don't think it's a clever idea to switch paths whenever you > encounter > an > passive path. Seems like you could do a nice ping-pong that way ... > > Cheers, > > Hannes > > - > To unsubscribe from this list: send the line "unsubscribe > linux-scsi" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
