Hello, This is a sanity check for myself, I just want to make sure I'm not missing something. If I set features to be "1 queue_if_no_path" and I run multipath -v2 I get [size=12 GB][features="1 queue_if_no_path"][hwhandler="0"] \_ round-robin 0 \_ 2:0:0:0 sdb 8:16 [ready] \_ 3:0:0:0 sdf 8:80 [ready] But if I then do a multipath -ll I get [size=12 GB][features="0"][hwhandler="0"] \_ round-robin 0 [active] \_ 2:0:0:0 sdb 8:16 [active][ready] \_ 3:0:0:0 sdf 8:80 [active][ready] Now when multipath -v2 is run, the maps arent printed until domap is hit in coalesce_paths, at which point the mpp has had features set from the configuration. Howerver, with multipath -ll, it never hits coalesce_paths, it just pulls the information out of mpp->params, which is something like params = 0 0 1 1 round-robin 0 2 1 8:48 100 8:112 100 It doesn't look like the features is getting put into the params list. My question is this, is anyone else using features "1 queue_if_no_path", and if you are do you see the same things I do? If you are good theres a bug and that needs to be addressed, if you aren't then would you mind posting your multipath.conf to see if I've just fudged this all up? Thank you, Josef -- dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
