On Wed, Nov 02, 2005 at 04:32:06PM -0500, goggin, edward wrote:
> On Date: Mon, 31 Oct 2005 08:58:06 -0500
> Brian Long <brilong@xxxxxxxxx> wrote
>
> >
> > On Wed, 2005-10-26 at 15:37 -0400, Phil Lowden (plowden) wrote:
> > > I'm using LVM2 with device-mapper-multipath 0.4.5 on GA
> > RHEL 4 update 2
> > > release, kernel version 2.6.9-22.ELsmp. Storage is 4 Clariion CX600
> > > LUNs,
> > > 2 with a primary path on SP A and 2 on SP B. HBAs are QLA3240 with
> > > firmware 3.03.15 IPX and the RedHat-distributed driver version
> > > 8.01.00b5-rh2.
> > >
> > > When I disrupt one path by disabling a host or SP switch port,
> > > failover works great but failback doesn't happen automatically
> > > with the current config (below). By this I mean
> > > when the connection to e.g. SP B is restored, all
> > > 4 LUNs stay trespassed to SP A. Is this by design?
> > > Or is there support for automatic failback, i.e.
> > > I/O is paused and a trespass is issued to restore
> > > the 2 SP B LUNs to their primary paths?
> > >
> > > Of course manual failback is possible, but without
> > > quiescing I/O I found I was able to munge my LVM2
> > > objects up quite nicely. Manual failback with quiesced
> > > I/O is fine.
> >
> > No one has automatic failback working on Clarrion storage?
>
> Unfortunately, this doesn't just work "out of the box" yet.
>
> You need to setup a default failback setting of immediate in the
> /etc/multipath.conf configuration file, ...
>
> defaults {
> failback immediate
> }
>
> ... or selectively set the failback setting to immediate in the
> multipath config file for each EMC CLARiiON logical unit
>
> multipaths {
> multipath {
> wwid 360061 ...
> failback immediate
> }
> ...
> }
>
> Setting this attribute value for the entire EMC CLARiiON class of
> devices via the multipath config file "device" attribute doesn't
> work because of a bug (mpp->hwe field is never set for multipathd)
> in the multipathd code which is patched to work by the single line
> patch below. Due to the same bug, a patch I submitted many weeks
> ago to libmultipath/hwtable.c to setup the default failback policy
> for EMC CLARiiON to immediate also does not work.
>
> Once the distributors pick up both this single line change and the
> change in hwtable.c, immediate path group failback for CLARiiON
> will just work.
These changes are both in the RHEL4 U3 code.
> -------------------------------------------------------------------
> diff --git a/multipathd/main.c b/multipathd/main.c
> --- a/multipathd/main.c
> +++ b/multipathd/main.c
> @@ -146,6 +146,7 @@ adopt_paths (struct vectors * vecs, stru
> if (!strncmp(mpp->wwid, pp->wwid, WWID_SIZE)) {
> condlog(4, "%s ownership set", pp->dev_t);
> pp->mpp = mpp;
> + mpp->hwe = pp->hwe;
> }
> }
> }
>
> --
>
> dm-devel@xxxxxxxxxx
> https://www.redhat.com/mailman/listinfo/dm-devel
--
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
