Kernel: 2.6.13.2 on SuSe 9.3 with device-mapper 1.01.05 with multipath 0.4.5. multipath.conf: defaults { multipath_tool "/sbin/multipath -v0" udev_dir /dev polling_interval 10 # default_selector "round-robin 1" default_path_grouping_policy multibus default_getuid_callout "/sbin/scsi_id -g -u -s /block/%n" default_prio_callout "/bin/true" default_features "0" rr_min_io 100 rr_weight priorities } blacklist { devnode "(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*" devnode "hd[a-z][[0-9]*]" devnode "cciss!c[0-9]d[0-9]*[p[0-9]*]" } I can run multipath and see all the drives and it recognizes both paths as follows: linux:~ # multipath create: 320000004cf8f2eda [size=33 GB][features="0"][hwhandler="0"] \_ round-robin 0 \_ 2:0:12:0 sdb 8:16 [ready] \_ 3:0:0:0 sdm 8:192 [ready] create: 320000004cf72cf0e [size=33 GB][features="0"][hwhandler="0"] \_ round-robin 0 \_ 2:0:13:0 sdc 8:32 [ready] \_ 3:0:1:0 sdn 8:208 [ready] create: 320000004cf72d14b [size=33 GB][features="0"][hwhandler="0"] \_ round-robin 0 \_ 2:0:14:0 sdd 8:48 [ready] \_ 3:0:2:0 sdo 8:224 [ready] create: 32000002037cda4b7 [size=33 GB][features="0"][hwhandler="0"] \_ round-robin 0 \_ 2:0:15:0 sde 8:64 [ready] \_ 3:0:3:0 sdp 8:240 [ready] create: 32000002037cd9b96 [size=33 GB][features="0"][hwhandler="0"] \_ round-robin 0 \_ 2:0:16:0 sdf 8:80 [ready] \_ 3:0:4:0 sdq 65:0 [ready] create: 320000004cf72c7e5 [size=33 GB][features="0"][hwhandler="0"] \_ round-robin 0 \_ 2:0:17:0 sdg 8:96 [ready] \_ 3:0:5:0 sdr 65:16 [ready] create: 320000004cf27865a [size=33 GB][features="0"][hwhandler="0"] \_ round-robin 0 \_ 2:0:18:0 sdh 8:112 [ready] \_ 3:0:6:0 sds 65:32 [ready] create: 320000004cf72d19a [size=33 GB][features="0"][hwhandler="0"] \_ round-robin 0 \_ 2:0:19:0 sdi 8:128 [ready] \_ 3:0:7:0 sdt 65:48 [ready] create: 320000004cf72ca99 [size=33 GB][features="0"][hwhandler="0"] \_ round-robin 0 \_ 2:0:20:0 sdj 8:144 [ready] \_ 3:0:8:0 sdu 65:64 [ready] create: 32000002037cd9f05 [size=33 GB][features="0"][hwhandler="0"] \_ round-robin 0 \_ 2:0:21:0 sdk 8:160 [ready] \_ 3:0:9:0 sdv 65:80 [ready] create: 320000004cf72c818 [size=33 GB][features="0"][hwhandler="0"] \_ round-robin 0 \_ 2:0:22:0 sdl 8:176 [ready] \_ 3:0:10:0 sdw 65:96 [ready] But the second I uncomment the default_selector to set round-robin I get these errors: linux:~ # multipath reload: 320000004cf8f2eda [size=33 GB][features="0"][hwhandler="0"] \_ round-robin 1 \_ 2:0:12:0 sdb 8:16 [active][ready] \_ 3:0:0:0 sdm 8:192 [active][ready] device-mapper ioctl cmd 9 failed: Invalid argument device-mapper ioctl cmd 14 failed: No such device or address reload: 320000004cf72cf0e [size=33 GB][features="0"][hwhandler="0"] \_ round-robin 1 \_ 2:0:13:0 sdc 8:32 [active][ready] \_ 3:0:1:0 sdn 8:208 [active][ready] device-mapper ioctl cmd 9 failed: Invalid argument device-mapper ioctl cmd 14 failed: No such device or address reload: 320000004cf72d14b [size=33 GB][features="0"][hwhandler="0"] \_ round-robin 1 \_ 2:0:14:0 sdd 8:48 [active][ready] \_ 3:0:2:0 sdo 8:224 [active][ready] device-mapper ioctl cmd 9 failed: Invalid argument device-mapper ioctl cmd 14 failed: No such device or address reload: 32000002037cda4b7 [size=33 GB][features="0"][hwhandler="0"] \_ round-robin 1 \_ 2:0:15:0 sde 8:64 [active][ready] \_ 3:0:3:0 sdp 8:240 [active][ready] device-mapper ioctl cmd 9 failed: Invalid argument device-mapper ioctl cmd 14 failed: No such device or address reload: 32000002037cd9b96 [size=33 GB][features="0"][hwhandler="0"] \_ round-robin 1 \_ 2:0:16:0 sdf 8:80 [active][ready] \_ 3:0:4:0 sdq 65:0 [active][ready] device-mapper ioctl cmd 9 failed: Invalid argument device-mapper ioctl cmd 14 failed: No such device or address reload: 320000004cf72c7e5 [size=33 GB][features="0"][hwhandler="0"] \_ round-robin 1 \_ 2:0:17:0 sdg 8:96 [active][ready] \_ 3:0:5:0 sdr 65:16 [active][ready] device-mapper ioctl cmd 9 failed: Invalid argument device-mapper ioctl cmd 14 failed: No such device or address reload: 320000004cf27865a [size=33 GB][features="0"][hwhandler="0"] \_ round-robin 1 \_ 2:0:18:0 sdh 8:112 [active][ready] \_ 3:0:6:0 sds 65:32 [active][ready] device-mapper ioctl cmd 9 failed: Invalid argument device-mapper ioctl cmd 14 failed: No such device or address reload: 320000004cf72d19a [size=33 GB][features="0"][hwhandler="0"] \_ round-robin 1 \_ 2:0:19:0 sdi 8:128 [active][ready] \_ 3:0:7:0 sdt 65:48 [active][ready] device-mapper ioctl cmd 9 failed: Invalid argument device-mapper ioctl cmd 14 failed: No such device or address reload: 320000004cf72ca99 [size=33 GB][features="0"][hwhandler="0"] \_ round-robin 1 \_ 2:0:20:0 sdj 8:144 [active][ready] \_ 3:0:8:0 sdu 65:64 [active][ready] device-mapper ioctl cmd 9 failed: Invalid argument device-mapper ioctl cmd 14 failed: No such device or address reload: 32000002037cd9f05 [size=33 GB][features="0"][hwhandler="0"] \_ round-robin 1 \_ 2:0:21:0 sdk 8:160 [active][ready] \_ 3:0:9:0 sdv 65:80 [active][ready] device-mapper ioctl cmd 9 failed: Invalid argument device-mapper ioctl cmd 14 failed: No such device or address reload: 320000004cf72c818 [size=33 GB][features="0"][hwhandler="0"] \_ round-robin 1 \_ 2:0:22:0 sdl 8:176 [active][ready] \_ 3:0:10:0 sdw 65:96 [active][ready] device-mapper ioctl cmd 9 failed: Invalid argument device-mapper ioctl cmd 14 failed: No such device or address Am I doing something wrong for round-robin to work? This is a Qlogic Dual Port 2300 card with both ports connected to a Sun A5200. Any help appreciated. Thank you, Brad Dameron SeaTab Software www.seatab.com -- dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel