What actions are required to get multipath to "see" a lun added after reboot? I tried using an alternate qlogic driver, qla2xxx-v8.00.02-1, but that did not work. Thanks. environment: - rhas4 U2 Beta - Linux pecan 2.6.9-16.EL #1 Mon Aug 15 19:58:49 EDT 2005 i686 i686 i386 GNU/Linux - multipath-tools-0.4.5.49. compiled from ftp://sources.redhat.com/pub/dm/multipath-tools one-off patch of mpath_faker.c - 2 QLogic PCI to Fibre Channel Host Adapters for QLA2340: Firmware version 3.03.15 IPX, Driver version 8.01.00b5-rh2 - IBM ESS 2105F20 4 paths - /etc/mulipath.conf: defaults { multipath_tool "/sbin/multipath -v0" udev_dir /dev polling_interval 10 default_selector "round-robin 0" default_path_grouping_policy multibus default_getuid_callout "/sbin/scsi_id -g -u -s /block/%n" default_prio_callout "/bin/true" default_features "0" rr_wmin_io 100 failback immediate } devnode_blacklist { devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*" devnode "^hd[a-z][0-9]*" devnode "^cciss!c[0-9]d[0-9]*[p[0-9]*]" } devices { device { vendor "IBM" product "2105F20" path_grouping_policy multibus path_checker tur } } ============================================================ Ray Stell stellr@xxxxxx (540) 231-4109 Tempus fugit 28^D -- dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
