Hi, I'm not sure if this is the right list so apologies in advance if I'm in the wrong spot. The search tool for this list doesn't seem to work either. I have an Intel system with dual Qlogic HBAs (2340s) that talk to an STK D280 disk array (I see the generic multipath.conf lists a D280 as a device in the config file). I'm using SLES 9 SP1 w/ multipath-tools 0.3.6-0.3. They way the system is setup, hba1 talks to the A controller of the D280 and hba2 talks to the B controller (they are on seperate sans). The box has four luns, two are active on port A and two are active on port B. When I let multipath do it's thing it wants to use port B for everything and that triggers a fail over of the A luns to port B. If I do the dmsetup commands by hand I can get what I want, but is there a way to do this automatically? The thought of having a self made hack init script to do this seems highly suspect. Chris