On 5/13/21 7:15 AM, Theodore Ts'o wrote: > On Thu, May 13, 2021 at 06:42:22PM +0900, Changheun Lee wrote: >> >> Problem might be casued by exhausting of memory. And memory exhausting >> would be caused by setting of small bio_max_size. Actually it was not >> reproduced in my VM environment at first. But, I reproduced same problem >> when bio_max_size is set with 8KB forced. Too many bio allocation would >> be occurred by setting of 8KB bio_max_size. > > Hmm... I'm not sure how to align your diagnosis with the symptoms in > the bug report. If we were limited by memory, that should slow down > the I/O, but we should still be making forward progress, no? And a > forced reboot should not result in data corruption, unless maybe there > was a missing check for a failed memory allocation, causing data to be > written to the wrong location, a missing error check leading to the > block or file system layer not noticing that a write had failed > (although again, memory exhaustion should not lead to failed writes; > it might slow us down, sure, but if writes are being failed, something > is Badly Going Wrong --- things like writes to the swap device or > writes by the page cleaner must succeed, or else Things Would Go Bad > In A Hurry). After the LUKS data corruption issue was reported I decided to take a look at the dm-crypt code. In that code I found the following: static void clone_init(struct dm_crypt_io *io, struct bio *clone) { struct crypt_config *cc = io->cc; clone->bi_private = io; clone->bi_end_io = crypt_endio; bio_set_dev(clone, cc->dev->bdev); clone->bi_opf = io->base_bio->bi_opf; } [ ... ] static struct bio *crypt_alloc_buffer(struct dm_crypt_io *io, unsigned size) { [ ... ] clone = bio_alloc_bioset(GFP_NOIO, nr_iovecs, &cc->bs); [ ... ] clone_init(io, clone); [ ... ] for (i = 0; i < nr_iovecs; i++) { [ ... ] bio_add_page(clone, page, len, 0); remaining_size -= len; } [ ... ] } My interpretation is that crypt_alloc_buffer() allocates a bio, associates it with the underlying device and clones a bio. The input bio may have a size up to UINT_MAX while the new limit for the size of the cloned bio is max_sectors * 512. That causes bio_add_page() to fail if the input bio is larger than max_sectors * 512, hence the data corruption. Please note that this is a guess only and that I'm not familiar with the dm-crypt code. Bart. _______________________________________________ dm-crypt mailing list -- dm-crypt@xxxxxxxx To unsubscribe send an email to dm-crypt-leave@xxxxxxxx