I have an arm64 board installed with armbian linux OS. The board has an internal emmc and it can boot from an external usb drive too.
Now both the usb drive and the emmc has the same OS and they can boot respectively . As far as the root file system is concerned , the one at usb drive and the one at emmc are exactly the same.
Now I would like to luks the root file system at the emmc. The building process of a new uInitrd is quite smooth . The problem is : once the new uInitrd takes effect , the kernel hang without any warning . Please refer to the following kernel printout about the boot process . I would like to know how to debug it ? Thankyou !
================================================================================
Starting kernel ...
uboot time: 6464083 us
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.5.0-rc6-aml-s9xxx (root@vbox) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #rc1.038 SMP PREEMPT Thu Feb 6 10:21:51 MSK 2020
[ 0.000000] Machine model: Khadas VIM
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000063000000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] percpu: Embedded 22 pages/cpu s50392 r8192 d31528 u90112
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 470336
[ 0.000000] Kernel command line: root=/dev/mapper/emmcroot rootflags=data="" rw console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
[ 0.000000] Memory: 1505484K/1911808K available (14460K kernel code, 1434K rwdata, 5884K rodata, 960K init, 927K bss, 144180K reserved, 262144K cma-reserved)
[ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x7c/0x150 with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000354] Console: colour dummy device 80x25
[ 0.000649] printk: console [tty0] enabled
[ 0.000686] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.000706] pid_max: default: 32768 minimum: 301
[ 0.000825] LSM: Security Framework initializing
[ 0.000875] SELinux: Initializing.
[ 0.000952] *** VALIDATE SELinux ***
[ 0.001012] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.001035] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.001093] *** VALIDATE tmpfs ***
[ 0.001462] *** VALIDATE proc ***
[ 0.001666] *** VALIDATE cgroup1 ***
[ 0.001680] *** VALIDATE cgroup2 ***
[ 0.024005] ASID allocator initialised with 32768 entries
[ 0.031990] rcu: Hierarchical SRCU implementation.
[ 0.042021] EFI services will not be available.
[ 0.048042] smp: Bringing up secondary CPUs ...
[ 0.080261] Detected VIPT I-cache on CPU1
[ 0.080309] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.112298] Detected VIPT I-cache on CPU2
[ 0.112340] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.144341] Detected VIPT I-cache on CPU3
[ 0.144382] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.144456] smp: Brought up 1 node, 4 CPUs
[ 0.144520] SMP: Total of 4 processors activated.
[ 0.144531] CPU features: detected: 32-bit EL0 Support
[ 0.144543] CPU features: detected: CRC32 instructions
[ 0.144843] CPU: All CPU(s) started at EL2
[ 0.144865] alternatives: patching kernel code
[ 0.145847] devtmpfs: initialized
[ 0.150960] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.150997] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.157625] xor: measuring software checksum speed
[ 0.196327] 8regs : 2375.000 MB/sec
[ 0.236359] 32regs : 2724.000 MB/sec
[ 0.276398] arm64_neon: 2406.000 MB/sec
[ 0.276408] xor: using function: 32regs (2724.000 MB/sec)
[ 0.276458] pinctrl core: initialized pinctrl subsystem
[ 0.277059] thermal_sys: Registered thermal governor 'step_wise'
[ 0.277227] DMI not present or invalid.
[ 0.277554] NET: Registered protocol family 16
[ 0.281201] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.281244] audit: initializing netlink subsys (disabled)
[ 0.281431] audit: type=2000 audit(0.280:1): state=initialized audit_enabled=0 res=1
[ 0.282464] cpuidle: using governor ladder
[ 0.282504] cpuidle: using governor menu
[ 0.282847] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.283560] Serial: AMBA PL011 UART driver
[ 0.297999] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.298024] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.298037] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.298049] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.301534] cryptd: max_cpu_qlen set to 1000
[ 0.376588] raid6: neonx8 gen() 1616 MB/s
[ 0.444655] raid6: neonx8 xor() 1490 MB/s
[ 0.512704] raid6: neonx4 gen() 1566 MB/s
[ 0.580773] raid6: neonx4 xor() 1471 MB/s
[ 0.648832] raid6: neonx2 gen() 1200 MB/s
[ 0.716878] raid6: neonx2 xor() 1216 MB/s
[ 0.785010] raid6: neonx1 gen() 787 MB/s
[ 0.853030] raid6: neonx1 xor() 915 MB/s
[ 0.921090] raid6: int64x8 gen() 1195 MB/s
[ 0.989102] raid6: int64x8 xor() 769 MB/s
[ 1.057142] raid6: int64x4 gen() 1029 MB/s
[ 1.125220] raid6: int64x4 xor() 752 MB/s
[ 1.193296] raid6: int64x2 gen() 728 MB/s
[ 1.261308] raid6: int64x2 xor() 615 MB/s
[ 1.329413] raid6: int64x1 gen() 486 MB/s
[ 1.397413] raid6: int64x1 xor() 468 MB/s
[ 1.397423] raid6: using algorithm neonx8 gen() 1616 MB/s
[ 1.397434] raid6: .... xor() 1490 MB/s, rmw enabled
[ 1.397443] raid6: using neon recovery algorithm
[ 1.397707] ACPI: Interpreter disabled.
[ 1.398866] iommu: Default domain type: Translated
[ 1.399118] vgaarb: loaded
[ 1.399648] SCSI subsystem initialized
[ 1.400022] usbcore: registered new interface driver usbfs
[ 1.400066] usbcore: registered new interface driver hub
[ 1.400131] usbcore: registered new device driver usb
[ 1.400530] pps_core: LinuxPPS API ver. 1 registered
[ 1.400543] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 1.400566] PTP clock support registered
[ 1.400595] EDAC MC: Ver: 3.0.0
[ 1.401142] FPGA manager framework
[ 1.401244] Advanced Linux Sound Architecture Driver Initialized.
[ 1.401692] NetLabel: Initializing
[ 1.401705] NetLabel: domain hash size = 128
[ 1.401714] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 1.401772] NetLabel: unlabeled traffic allowed by default
[ 1.402227] clocksource: Switched to clocksource arch_sys_counter
[ 1.402250] *** VALIDATE bpf ***
[ 1.402488] VFS: Disk quotas dquot_6.6.0
[ 1.402546] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.402655] FS-Cache: Loaded
[ 1.402666] *** VALIDATE ramfs ***
[ 1.402687] *** VALIDATE hugetlbfs ***
[ 1.403044] pnp: PnP ACPI: disabled
[ 1.407961] NET: Registered protocol family 2
[ 1.408425] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 1.408473] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 1.408589] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 1.408795] TCP: Hash tables configured (established 16384 bind 16384)
[ 1.408926] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 1.408979] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 1.409178] NET: Registered protocol family 1
[ 1.409614] RPC: Registered named UNIX socket transport module.
[ 1.409633] RPC: Registered udp transport module.
[ 1.409643] RPC: Registered tcp transport module.
[ 1.409652] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.409668] NET: Registered protocol family 44
[ 1.409687] PCI: CLS 0 bytes, default 64
[ 1.409862] Trying to unpack rootfs image as initramfs...
[ 1.593595] Freeing initrd memory: 14372K
[ 1.594350] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 1.736370] Initialise system trusted keyrings
[ 1.736574] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 1.741653] zbud: loaded
[ 1.742911] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.743191] FS-Cache: Netfs 'nfs' registered for caching
[ 1.743691] NFS: Registering the id_resolver key type
[ 1.743726] Key type id_resolver registered
[ 1.743737] Key type id_legacy registered
[ 1.743752] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.743764] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 1.744808] FS-Cache: Netfs 'cifs' registered for caching
[ 1.745116] Key type cifs.spnego registered
[ 1.745136] Key type cifs.idmap registered
[ 1.745155] ntfs: driver 2.1.32 [Flags: R/W].
[ 1.745709] JFS: nTxBlock = 8192, nTxLock = 65536
[ 1.749560] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
[ 1.750925] *** VALIDATE xfs ***
[ 1.751203] ocfs2: Registered cluster interface o2cb
[ 1.751399] OCFS2 User DLM kernel interface loaded
[ 1.752652] *** VALIDATE gfs2 ***
[ 1.752907] gfs2: GFS2 installed
[ 1.753805] aufs 5.5-20200203
[ 1.771774] Key type asymmetric registered
[ 1.771797] Asymmetric key parser 'x509' registered
[ 1.771808] Asymmetric key parser 'pkcs8' registered
[ 1.771869] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.772030] io scheduler mq-deadline registered
[ 1.772044] io scheduler kyber registered
[ 1.772221] io scheduler bfq registered
[ 1.785287] soc soc0: Amlogic Meson GXL (S905X) Revision 21:b (82:2) Detected
[ 1.788917] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
[ 1.790679] Serial: AMBA driver
[ 1.791037] c11084c0.serial: ttyAML6 at MMIO 0xc11084c0 (irq = 10, base_baud = 1500000) is a meson_uart
[ 1.791191] serial serial0: tty port ttyAML6 registered
[ 1.791401] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 15, base_baud = 1500000) is a meson_uart
[ 2.762384] printk: console [ttyAML0] enabled
[ 2.767193] c81004e0.serial: ttyAML2 at MMIO 0xc81004e0 (irq = 16, base_baud = 1500000) is a meson_uart
[ 2.787238] brd: module loaded
[ 2.795004] loop: module loaded
[ 2.797395] libphy: Fixed MDIO Bus: probed
[ 2.798068] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found
[ 2.803175] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found
[ 2.809364] meson8b-dwmac c9410000.ethernet: PTP uses main clock
[ 2.815265] meson8b-dwmac c9410000.ethernet: no reset control found
[ 2.821893] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[ 2.828539] meson8b-dwmac c9410000.ethernet: DWMAC1000
[ 2.833685] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
[ 2.841100] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
[ 2.848517] meson8b-dwmac c9410000.ethernet: COE Type 2
[ 2.853689] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
[ 2.860676] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
[ 2.867087] meson8b-dwmac c9410000.ethernet: Normal descriptors
[ 2.872925] meson8b-dwmac c9410000.ethernet: Ring mode enabled
[ 2.878704] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 2.886805] libphy: stmmac: probed
[ 2.891308] VFIO - User Level meta-driver version: 0.3
[ 2.896572] dwc3 c9000000.dwc3: Failed to get clk 'ref': -2
[ 2.901486] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.907108] ehci-pci: EHCI PCI platform driver
[ 2.911535] ehci-platform: EHCI generic platform driver
[ 2.916865] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.922793] ohci-pci: OHCI PCI platform driver
[ 2.927218] ohci-platform: OHCI generic platform driver
[ 2.932969] usbcore: registered new interface driver usb-storage
[ 2.938516] mousedev: PS/2 mouse device common for all mice
[ 2.944488] i2c /dev entries driver
[ 2.951446] sdhci: Secure Digital Host Controller Interface driver
[ 2.953388] sdhci: Copyright(c) Pierre Ossman
[ 2.957752] Synopsys Designware Multimedia Card Interface Driver
[ 2.965013] meson-gx-mmc d0072000.mmc: Got CD GPIO
[ 2.995411] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
[ 3.022285] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.023328] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.029078] meson-sm: secure-monitor enabled
[ 3.033161] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 3.040454] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 3.059507] hid: raw HID events driver (C) Jiri Kosina
[ 3.059725] usbcore: registered new interface driver usbhid
[ 3.064566] usbhid: USB HID core driver
[ 3.068681] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
[BL31]: tee size: 0
[ 3.085147] NET: Registered protocol family 17
[ 3.085372] Key type dns_resolver registered
[ 3.088792] registered taskstats version 1
[ 3.092274] Loading compiled-in X.509 certificates
[ 3.097112] zswap: loaded using pool lzo/zbud
[ 3.101557] Key type ._fscrypt registered
[ 3.105284] Key type .fscrypt registered
[ 3.110182] Btrfs loaded, crc32c=crc32c-generic
[ 3.153371] mmc1: new HS200 MMC card at address 0001
[ 3.158177] mmcblk1: mmc1:0001 DG4008 7.28 GiB
[ 3.158530] mmcblk1boot0: mmc1:0001 DG4008 partition 1 4.00 MiB
[ 3.163453] mmcblk1boot1: mmc1:0001 DG4008 partition 2 4.00 MiB
[ 3.169159] mmcblk1rpmb: mmc1:0001 DG4008 partition 3 4.00 MiB, chardev (243:0)
[ 3.186090] mmcblk1: p1 p2
[ 3.258170] Key type encrypted registered
[ 3.275342] meson-drm d0100000.vpu: Queued 2 outputs on vpu
[ 3.275667] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.281901] [drm] No driver support for vblank timestamp query.
[ 3.287807] meson-drm d0100000.vpu: CVBS Output connector not available
[ 3.322281] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[ 3.326904] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[ 3.334940] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops)
[ 3.342185] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 0
[ 3.348936] [drm] Cannot find any crtc or sizes
[ 3.354036] libphy: mdio_mux: probed
[ 3.357012] [drm] Cannot find any crtc or sizes
[ 3.363181] libphy: mdio_mux: probed
[ 3.365273] phy phy-d0078080.phy.2: unsupported PHY mode 5
[ 3.372398] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.375815] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 3.383517] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010
[ 3.392746] xhci-hcd xhci-hcd.0.auto: irq 42, io mem 0xc9000000
[ 3.398832] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[ 3.406770] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.413921] usb usb1: Product: xHCI Host Controller
[ 3.418750] usb usb1: Manufacturer: Linux 5.5.0-rc6-aml-s9xxx xhci-hcd
[ 3.425218] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 3.430508] hub 1-0:1.0: USB hub found
[ 3.433770] hub 1-0:1.0: 2 ports detected
[ 3.437993] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.443174] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 3.450759] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 3.457261] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.465323] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.05
[ 3.473434] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.480591] usb usb2: Product: xHCI Host Controller
[ 3.485420] usb usb2: Manufacturer: Linux 5.5.0-rc6-aml-s9xxx xhci-hcd
[ 3.491889] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 3.497131] hub 2-0:1.0: USB hub found
[ 3.500460] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 3.509226] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq
[ 3.539184] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
domain-0 init dvfs: 4
[ 3.552456] gx-sound-card sound: snd-soc-dummy-dai <-> c1105400.bus:audio-controller-0 mapping ok
[ 3.556260] gx-sound-card sound: i2s-hifi <-> c1105400.bus:audio-controller-2 mapping ok
[ 3.563829] gx-sound-card sound: ASoC: no DMI vendor name!
[ 3.569743] printk: console [netcon0] enabled
[ 3.573472] netconsole: network logging started
[ 3.577943] hctosys: unable to open rtc device (rtc0)
[ 3.583224] ALSA device list:
[ 3.585868] #0: AMLGX
[ 3.588639] Freeing unused kernel memory: 960K
[ 3.592746] Run /init as init process
[ 3.770276] usb 1-2: new high-speed USB device number 2 using xhci-hcd
[ 3.792394] usb 1-2: New USB device found, idVendor=0951, idProduct=1665, bcdDevice= 1.00
[ 3.795038] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.802272] usb 1-2: Product: DataTraveler 2.0
[ 3.806449] usb 1-2: Manufacturer: Kingston
[ 3.810571] usb 1-2: SerialNumber: 001CC05FE92CFD307932248D
[ 3.817380] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 3.826648] scsi host0: usb-storage 1-2:1.0
[ 3.864900] usbcore: registered new interface driver uas
[ 3.953217] lima d00c0000.gpu: IRQ ppmmu3 not found
[ 3.953266] lima d00c0000.gpu: IRQ ppmmu4 not found
[ 3.957602] lima d00c0000.gpu: IRQ ppmmu5 not found
[ 3.962476] lima d00c0000.gpu: IRQ ppmmu6 not found
[ 3.967326] lima d00c0000.gpu: IRQ ppmmu7 not found
[ 3.972204] lima d00c0000.gpu: gp - mali450 version major 0 minor 0
[ 3.978708] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0
[ 3.984789] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0
[ 3.991018] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0
[ 3.997266] lima d00c0000.gpu: IRQ pp3 not found
[ 4.001781] lima d00c0000.gpu: IRQ pp4 not found
[ 4.006384] lima d00c0000.gpu: IRQ pp5 not found
[ 4.010904] lima d00c0000.gpu: IRQ pp6 not found
[ 4.015518] lima d00c0000.gpu: IRQ pp7 not found
[ 4.020058] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus
[ 4.028167] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus
[ 4.038258] lima d00c0000.gpu: bus rate = 166666667
[ 4.041759] lima d00c0000.gpu: mod rate = 744000000
[ 4.046455] [drm] Initialized lima 1.0.0 20190217 for d00c0000.gpu on minor 1
[ 4.066095] random: fast init done
[ 4.854967] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 4
[ 4.860464] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.861302] sd 0:0:0:0: [sda] 30233588 512-byte logical blocks: (15.5 GB/14.4 GiB)
[ 4.870564] sd 0:0:0:0: [sda] Write Protect is off
[ 4.875306] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.911570] sda: sda1 sda2
[ 4.914265] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 5.453031] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@xxxxxxxxxx
_______________________________________________ dm-crypt mailing list dm-crypt@xxxxxxxx https://www.saout.de/mailman/listinfo/dm-crypt
