Hello, Sorry for the delay. Since the locking problem means we then have to reboot the machine, we had to wait for a slot without too much activity. On 29/06/2020 16:34, Ondrej Kozina wrote: > Could you please send debug output also for particular hanging lvm2 > command? Just add -vvvv to the command. Syslog output would also help. > > I can't tell you more than the cryptsetup command is stuck in I/O. > Perhaps hosting LV is suspended due to some error but I can't tell for > sure. So... First the cryptsetup command on the « relevant » LV : cryptsetup --verbose --debug open /dev/v03/E192-X E192 # cryptsetup 2.3.2 processing "cryptsetup --verbose --debug open /dev/v03/E192-X E192" # Running command open. # Locking memory. # Installing SIGINT/SIGTERM handler. # Unblocking interruption on signal. # Allocating context for crypt device /dev/v03/E192-X. # Trying to open and read device /dev/v03/E192-X with direct-io. # Initialising device-mapper backend library. # Trying to load any crypt type from device /dev/v03/E192-X. # Crypto backend (OpenSSL 1.1.1g 21 Apr 2020) initialized in cryptsetup library version 2.3.2. # Detected kernel Linux 5.4.38-gentoo-LTS x86_64. # PBKDF pbkdf2-sha256, time_ms 2000 (iterations 0). # Reading LUKS header of size 1024 from device /dev/v03/E192-X # Key length 32, device size 2147483648 sectors, header size 2050 sectors. # Activating volume E192 using token -1. # Interactive passphrase entry requested. Enter passphrase for /dev/v03/E192-X: # Activating volume E192 [keyslot -1] using passphrase. # dm version [ opencount flush ] [16384] (*1) # dm versions [ opencount flush ] [16384] (*1) # Detected dm-ioctl version 4.41.0. # Detected dm-crypt version 1.19.0. # Device-mapper backend running with UDEV support enabled. # dm status E192 [ opencount noflush ] [16384] (*1) # Trying to open key slot 0 [ACTIVE_LAST]. # Reading key slot 0 area. # Using userspace crypto wrapper to access keyslot area. # Reusing open ro fd on device /dev/v03/E192-X The command does not give control back, last displayed message as above. Syslog gives this very quickly after the cryptsetup : kernel: [31628.245265] usb 4-1.3.4: reset SuperSpeed Gen 1 USB device number 7 using xhci_hcd So there may be some hardware problem. We did a simple lvscan -vvvv (names have been altered for confidentiality, and we have suppressed a lot of the disk scanning messages) : #device/dev-cache.c:761 Found dev 253:3 /dev/disk/by-id/dm-name-X-E246-X- - new alias. #device/dev-cache.c:761 Found dev 253:3 /dev/disk/by-id/dm-uuid-LVM-TOUXYrO3Bntbs45SGEDLrcjT1fqwDLfpflLwNkbvdkJLiZXBov0W3CrVcY30XXMd - new alias. #device/dev-cache.c:761 Found dev 253:3 /dev/disk/by-uuid/30cb5aef-c58f-40e9-9e44-d37e113c3ea6 - new alias. #device/dev-cache.c:761 Found dev 253:3 /dev/mapper/X-E246--X - new alias. #device/dev-cache.c:721 Found dev 253:4 /dev/dm-4 - new. #device/dev-cache.c:761 Found dev 253:4 /dev/disk/by-id/dm-name-v03-E192-X - new alias. #device/dev-cache.c:761 Found dev 253:4 /dev/disk/by-id/dm-uuid-LVM-ppvRwREaX6hj9inWWjaKEsTnvT42WhF2MCddbrQjgxA2n3gOQByeWjqdD43kJFbZ - new alias. #device/dev-cache.c:761 Found dev 253:4 /dev/disk/by-uuid/9bcee5de-aa79-42f1-bcd2-9ecfc0acc30f - new alias. #device/dev-cache.c:761 Found dev 253:4 /dev/mapper/v03-E192-X - new alias. #device/dev-cache.c:761 Found dev 253:4 /dev/v03/E192-X - new alias. #filters/filter-persistent.c:346 filter caching good /dev/sdf #cache/lvmcache.c:2080 lvmcache /dev/sdf: now in VG #orphans_lvm2 (#orphans_lvm2) with 0 mda(s). #filters/filter-persistent.c:346 filter caching good /dev/sde #cache/lvmcache.c:2080 lvmcache /dev/sde: now in VG #orphans_lvm2 (#orphans_lvm2) with 0 mda(s). #filters/filter-persistent.c:346 filter caching good /dev/sdg #cache/lvmcache.c:2080 lvmcache /dev/sdg: now in VG #orphans_lvm2 (#orphans_lvm2) with 0 mda(s). #metadata/vg.c:67 Allocated VG v03 at 0x55bec1b74110. #format_text/import_vsn1.c:591 Importing logical volume v03/E192-X. #format_text/import_vsn1.c:591 Importing logical volume v03/P50-X. #cache/lvmcache.c:754 lvmcache has no info for vgname "v03" with VGID ppvRwREaX6hj9inWWjaKEsTnvT42WhF2. #cache/lvmcache.c:754 lvmcache has no info for vgname "v03". #cache/lvmcache.c:2080 lvmcache /dev/sdf: now in VG v03 with 1 mda(s). #cache/lvmcache.c:1908 lvmcache /dev/sdf: VG v03: set VGID to ppvRwREaX6hj9inWWjaKEsTnvT42WhF2. #cache/lvmcache.c:2080 lvmcache /dev/sde: now in VG v03 (ppvRwREaX6hj9inWWjaKEsTnvT42WhF2) with 1 mda(s). #cache/lvmcache.c:2080 lvmcache /dev/sdg: now in VG v03 (ppvRwREaX6hj9inWWjaKEsTnvT42WhF2) with 1 mda(s). #cache/lvmetad.c:2510 Sending lvmetad vg_clear_outdated_pvs And nothing more, lvscan hangs there. Sincerely, -- B&A Consultants - Sécurité informatique - Conseils et audits www.ba-consultants.fr Tél : (0) 563 277 241 - Fax : (0) 567 737 829 _______________________________________________ dm-crypt mailing list dm-crypt@xxxxxxxx https://www.saout.de/mailman/listinfo/dm-crypt
