Hi,
Sorry one typo –
See in red below.
Thank you very much for the help!
_____________________________________________
From: Hualing Yu
Sent: Friday, October 18, 2019 3:02 PM
To: 'dm-crypt@xxxxxxxx' <dm-crypt@xxxxxxxx>
Subject: 10 M Luks2 header size?
From: Hualing Yu
Sent: Friday, October 18, 2019 3:02 PM
To: 'dm-crypt@xxxxxxxx' <dm-crypt@xxxxxxxx>
Subject: 10 M Luks2 header size?
Hello,
I have a question on Luks2 header size. I created luck2 partition with only one passphrase slot enabled. But it seems to take really 10 M space. Here is the luks dump:
sh-4.4# cryptsetup luksDump /dev/mmcblk2gp0p2
LUKS header information
Version: 2
Epoch: 3
Metadata area: 16384 [bytes]
Keyslots area: 16744448 [bytes] <<<<<<<<<<<<<<<<<<<<<< why keyslots take so much space?
UUID: 9037890e-0f2b-4d73-b93b-e2bb53579492
Label: (no label)
Subsystem: (no subsystem)
Flags: (no flags)
Data segments:
0: crypt
offset: 16777216 [bytes] <<<<<<<<<<<<<<<<<<<<<<< so this means the space available to user data is after keylots
length: (whole device)
cipher: aes-xts-plain64
sector: 512 [bytes]
0: crypt
offset: 16777216 [bytes] <<<<<<<<<<<<<<<<<<<<<<< so this means the space available to user data is after keylots
length: (whole device)
cipher: aes-xts-plain64
sector: 512 [bytes]
I check in the internet and found all luks2 header dumps show the same values for those two commented entries.
I actually also looked into my device content using dd command, and see indeed the space before 16777216 bytes (10 M) is all scatted filled with something, only after that point, it is all '0'. I zeroed out entire device before doing cryptsetup luksFormat.
I actually also looked into my device content using dd command, and see indeed the space before 16777216 bytes (10 M) is all scatted filled with something, only after that point, it is all '0'. I zeroed out entire device before doing cryptsetup luksFormat.
Also checked the mapped device size from /dev/mapper/<mapped dev>, and from dev/<device> :
sh-4.4# fdisk -l /dev/mmcblk2gp0p2
Disk /dev/mmcblk2gp0p2: 392 MB, 411041792 bytes, 802816 sectors
12544 cylinders, 4 heads, 16 sectors/track
Units: sectors of 1 * 512 = 512 bytes
Disk /dev/mmcblk2gp0p2 doesn't contain a valid partition table
sh-4.4#
sh-4.4# fdisk -l /dev/mapper/gp0p2
Disk /dev/mapper/gp0p2: 376 MB, 394264576 bytes, 770048 sectors
47 cylinders, 255 heads, 63 sectors/track
Units: sectors of 1 * 512 = 512 bytes
411041792 – 394264576 = 16777216 (10M)
Is there anything wrong? Should luks has so much overhead?
I appreciate it greatly if you could share you thinking on this.
Thank you,
Hualing
_____________________________________________
From: Hualing Yu
Sent: Friday, October 18, 2019 10:22 AM
To: dm-crypt@xxxxxxxx
Subject: question on LUKS2
From: Hualing Yu
Sent: Friday, October 18, 2019 10:22 AM
To: dm-crypt@xxxxxxxx
Subject: question on LUKS2
Hello,
Is this mailing list still active?
May I still ask questions here?
Thanks,
Hualing
Yu
Firmware Engineering
Security Products
Johnson Controls
6 Technology Park Drive
Westford, MA 01886
USA
+1 978 577 4171 direct
_______________________________________________ dm-crypt mailing list dm-crypt@xxxxxxxx https://www.saout.de/mailman/listinfo/dm-crypt
