On 13/12/12 21:36, Philipp Durrer - Nexus Informatik wrote: > Hi > > > > I've got a very serious issue, I can't mount my LUKS crypted > software raid disk after a regular kernel update (Ubuntu 11.10, > Kernel 3.0.0-12-generic to 3.0.0-17-generic) and a following > reboot. > > > > After the reboot the raid disks start properly and are active: > > > >> cat /proc/mdstat > >> Personalities : [raid0] [raid1] [linear] [multipath] [raid6] >> [raid5] > [raid4] [raid10] > >> md0 : active raid1 sda2[0] sdb2[1] > >> 488269 blocks super 1.2 [2/2] [UU] > >> > >> md2 : active raid1 sda4[0] sdb4[1] > >> 3905214 blocks super 1.2 [2/2] [UU] > >> > >> md126 : active raid0 sda5[0] sdb5[1] > >> 5832190976 blocks super 1.2 512k chunks > >> > >> md1 : active raid1 sda3[0] sdb3[1] > >> 9764529 blocks super 1.2 [2/2] [UU] > >> > >> md127 : active raid0 sdd1[1] sdc1[0] > >> 5860530176 blocks super 1.2 512k chunks > >> > >> unused devices: <none> > > > > The LUKS header looks fine aswell: > >> cryptsetup luksDump /dev/md126 > >> LUKS header information for /dev/md126 > >> > >> Version: 1 > >> Cipher name: aes > >> Cipher mode: xts-essiv:sha256 > >> Hash spec: sha1 > >> Payload offset: 4096 > >> MK bits: 512 > >> MK digest: f0 59 ac a8 13 3c e1 XX YY ZZ ce 0f ba cd 63 0a >> 4a d0 25 b2 > >> MK salt: e8 3f fc 25 3a 0e a3 XX XX YY ZZ 45 1c 12 31 f6 > >> cb ea 03 d2 51 66 f9 4c 51 c4 29 4d 97 4f 17 0f > >> MK iterations: 33375 > >> UUID: 1686eb8f-be62-462b-9326-319a7cc8e087 > >> > >> Key Slot 0: ENABLED > >> Iterations: 133653 > >> Salt: c1 d9 a0 ff 6e 7a XX XX YY ZZ a7 67 dc >> 8f > 10 93 > >> 4e a2 9c 9e d8 39 4f 91 37 3d e3 8f df 24 > dc 60 > >> Key material offset: 8 > >> AF stripes: 4000 > >> Key Slot 1: DISABLED > >> Key Slot 2: DISABLED > >> Key Slot 3: DISABLED > >> Key Slot 4: DISABLED > >> Key Slot 5: DISABLED > >> Key Slot 6: DISABLED > >> Key Slot 7: DISABLED > > > > I can aswell open the Disk successful without compaints: > >> cryptsetup -d /keystore/tempstuff1 luksOpen /dev/md126 stuff > >> cryptsetup status stuff > >> /dev/mapper/stuff is active. > >> type: LUKS1 > >> cipher: aes-xts-essiv:sha256 > >> keysize: 512 bits > >> device: /dev/md126 > >> offset: 4096 sectors > >> size: 11664377856 sectors > >> mode: read/write > > > > But when I try to mount the device mapper disk I get compaints: > >> mount /dev/mapper/stuff /home/crypt/ > >> mount: you must specify the filesystem type > > > >> mount -t ext4 /dev/mapper/stuff /home/crypt/ > >> mount: wrong fs type, bad option, bad superblock on >> /dev/mapper/stuff, > >> missing codepage or helper program, or other error > >> In some cases useful info is found in syslog - try > >> dmesg | tail or so > > > >> dmesg | tail > >> [12124.435471] EXT4-fs (dm-5): VFS: Can't find ext4 filesystem > > > > Filesystem check doesn't work either :( > > > >> fsck.ext4 /dev/mapper/stuff > >> e2fsck 1.41.14 (22-Dec-2010) > >> fsck.ext4: Superblock invalid, trying backup blocks... > >> fsck.ext4: Bad magic number in super-block while trying to open > /dev/mapper/stuff > >> . > > > > I can't see any updated dependencies of cryptsetup that are related > to this issue, I had the default cryptsetup version 1.1.3 on the > box and now tried with 1.5.1 with no success :( > > Any ideas ? I would greatly appreciate any inputs helping me, that > I don't lose about 12 TB of precious data. -.- > > > > Thank you. > > Regards > > > > > > _______________________________________________ dm-crypt mailing > list dm-crypt@xxxxxxxx > http://www.saout.de/mailman/listinfo/dm-crypt Your solution is in the FAQ ;), section issues _______________________________________________ dm-crypt mailing list dm-crypt@xxxxxxxx http://www.saout.de/mailman/listinfo/dm-crypt
