Re: dm-crypt Digest, Vol 32, Issue 12

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Fan,

Not all algos are mapped, to get more info about the mapping I have attached the cat file. Please comment on this..

Thanks,
Hari

On Thu, Feb 9, 2012 at 11:33 AM, FAN ZHANG <fzhangcsc@xxxxxxxxx> wrote:
Hari:
 
It seems that either chainmode or cipher requested by dm-crypt does not match what is registered in crypto driver.
 
What are chainmode and cipher for device encption in your test?
 
 
Thanks
 
Fan

From: "dm-crypt-request@xxxxxxxx" <dm-crypt-request@xxxxxxxx>
To: dm-crypt@xxxxxxxx
Sent: Thursday, February 9, 2012 1:22 PM
Subject: dm-crypt Digest, Vol 32, Issue 12

Send dm-crypt mailing list submissions to
    dm-crypt@xxxxxxxx

To subscribe or unsubscribe via the World Wide Web, visit
    http://www.saout.de/mailman/listinfo/dm-crypt
or, via email, send a message with subject or body 'help' to
    dm-crypt-request@xxxxxxxx

You can reach the person managing the list at
    dm-crypt-owner@xxxxxxxx

When replying, please edit your Subject line so it is more specific
than "Re: Contents of dm-crypt digest..."


Today's Topics:

  1. Re: dm-crypt Digest, Vol 32, Issue 8 (Hari Prasad)


----------------------------------------------------------------------

Message: 1
Date: Thu, 9 Feb 2012 10:34:52 -0800
From: Hari Prasad <hariprasad2006@xxxxxxxxx>
To: FAN ZHANG <fzhangcsc@xxxxxxxxx>
Cc: "dm-crypt@xxxxxxxx" <dm-crypt@xxxxxxxx>
Subject: Re: dm-crypt Digest, Vol 32, Issue 8
Message-ID:
    <CABOOXR60kk_MJhnTz7_homh4Wty7bbySnKvV82ySW5C4FgMjZQ@xxxxxxxxxxxxxx>
Content-Type: text/plain; charset="iso-8859-1"

Thanks Fan. Yes, I did follow all the steps you mentioned, I could see our
implementation in 'proc/crypto' as well, even then I don't see our function
calls being called. Clueless right now... Any pointers or degugging
suggestions would greatly help!

Thanks,
Hari

On Wed, Feb 8, 2012 at 12:02 PM, FAN ZHANG <fzhangcsc@xxxxxxxxx> wrote:

> Hi Hari :
>
>
>
> 1. As I know ICS does not use cryptsetup to creat dm-crypt map target. Are
> you sure that the mapper was created successfully in your device?******
>  ****
> 2. Did you call crypto_register_alg() to regist crypt algorithms in crypt
> driver?****
>  ****
> 3. Also, which storage device do you want to encrypt?****
> ** **
>
>
>
> Thanks
>
> Fan
>
>
>
>
>
> From: "dm-crypt-request@xxxxxxxx" <dm-crypt-request@xxxxxxxx>
> *To:* dm-crypt@xxxxxxxx
> *Sent:* Wednesday, February 8, 2012 1:29 PM
> *Subject:* dm-crypt Digest, Vol 32, Issue 8
>
>
> Send dm-crypt mailing list submissions to
>    dm-crypt@xxxxxxxx
>
> To subscribe or unsubscribe via the World Wide Web, visit
>    http://www.saout.de/mailman/listinfo/dm-crypt
> or, via email, send a message with subject or body 'help' to
>    dm-crypt-request@xxxxxxxx
>
> You can reach the person managing the list at
>    dm-crypt-owner@xxxxxxxx
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of dm-crypt digest..."
>
>
> Today's Topics:
>
>  1. Inquiry from Qualcomm on DM_CRYPT for Android ICS (Hari Prasad)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 8 Feb 2012 11:21:57 -0800
> From: Hari Prasad <hariprasad2006@xxxxxxxxx>
> To: dm-crypt@xxxxxxxx
> Subject: Inquiry from Qualcomm on DM_CRYPT for Android ICS
> Message-ID:
>    <CABOOXR4ssxieoRpf3gxkyMXQ-EcHcRYEPgc6kmpPGTWc6CwwKQ@xxxxxxxxxxxxxx>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi there,
>
> MY name is Hari, I work for Crypto SW team at Qualcomm Inc. We are using
> our Crypto HW to do all the necessary encryption & decryption. We are
> trying to use this DM-CRYPT in our setup, I am not sure how the HW device
> is mapped using DM_CRYPT, I don't see any of our code being called for HW
> when I run an encryption test (ENCRYPT PHONE in ICS Android build).
>
> I have attached the log (printk added in DM_CRYPT), I see that the device
> crashes or something happens (device disappears after few seconds of
> starting the ENCRYPT_PHONE).
>
> We register our HW through misc_register function call.
>
> It would be really helpful if I can get the solution to map our HW device
> using DM-CRYPT.
>
> 1. Is there any module or any file that I can look up to find any info
> about the devices being mapped?
> 2. Is there a way I can put a breakpoint or add some prink statements in
> some module which outputs this info (in runtime)?
>
> Thanks,
> Hari
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://www.saout.de/pipermail/dm-crypt/attachments/20120208/d575eafa/attachment.html
> >
> -------------- next part --------------
>    1    <6>[    0.000000] Booting Linux on physical CPU 0
>
>    2    <6>[    0.000000] Initializing cgroup subsys cpu
>
>    3    <5>[    0.000000] Linux version 3.0.8-00006-g7e7c91b-dirty
> (hnamgund@rameshm2-linux) (gcc version 4.4.3 (GCC) ) #4 SMP PREEMPT Tue
> Feb 7 17:30:41 PST 2012
>
>    4    <4>[    0.000000] CPU: ARMv7 Processor [510f04d2] revision 2
> (ARMv7), cr=10c5387d
>
>    5    <4>[    0.000000] CPU: VIPT nonaliasing data cache, VIPT
> nonaliasing instruction cache
>
>    6    <4>[    0.000000] Machine: QCT MSM8960 FLUID
>
>    7    <6>[    0.000000] low unstable address b0000000 max size 10000000
> bank size 20000000
>
>    8    <6>[    0.000000] movable zone start b0000000 size 10000000
>
>    9    <6>[    0.000000] memory pool 3 (start a5500000 size ab00000)
> initialized
>
>    10    <4>[    0.000000] Memory policy: ECC disabled, Data cache
> writealloc
>
>    11    <6>[    0.000000] socinfo_init: v6, id=87, ver=2.0, raw_id=1712,
> raw_ver=2, hw_plat=3,  hw_plat_ver=65536
>
>    12    <6>[    0.000000]  accessory_chip=0 hw_plat_subtype=0
>
>    13    <4>[    0.000000] Zone PFN ranges:
>
>    14    <4>[    0.000000]  Normal  0x00080200 -> 0x000a1200
>
>    15    <4>[    0.000000]  HighMem  0x000a1200 -> 0x000c0000
>
>    16    <4>[    0.000000] Movable zone start PFN for each node
>
>    17    <4>[    0.000000]  Node 0: 677888
>
>    18    <4>[    0.000000] early_node_map[3] active PFN ranges
>
>    19    <4>[    0.000000]    0: 0x00080200 -> 0x00088f00
>
>    20    <4>[    0.000000]    0: 0x00090000 -> 0x000a5500
>
>    21    <4>[    0.000000]    0: 0x000b0000 -> 0x000c0000
>
>    22    <7>[    0.000000] On node 0 totalpages: 188928
>
>    23    <7>[    0.000000]  Normal zone: 1056 pages used for memmap
>
>    24    <7>[    0.000000]  Normal zone: 0 pages reserved
>
>    25    <7>[    0.000000]  Normal zone: 105184 pages, LIFO batch:31
>
>    26    <7>[    0.000000]  HighMem zone: 140 pages used for memmap
>
>    27    <7>[    0.000000]  HighMem zone: 17012 pages, LIFO batch:3
>
>    28    <7>[    0.000000]  Movable zone: 848 pages used for memmap
>
>    29    <7>[    0.000000]  Movable zone: 64688 pages, LIFO batch:15
>
>    30    <6>[    0.000000] allocating 31825920 bytes at c163b000
> (8183b000 physical) for fb
>
>    31    <6>[    0.000000] PERCPU: Embedded 8 pages/cpu @c3498000 s9344
> r8192 d15232 u32768
>
>    32    <7>[    0.000000] pcpu-alloc: s9344 r8192 d15232 u32768
> alloc=8*4096
>
>    33    <7>[    0.000000] pcpu-alloc: [0] 0 [0] 1
>
>    34    <4>[    0.000000] Built 1 zonelists in Zone order, mobility
> grouping on.  Total pages: 186884
>
>    35    <5>[    0.000000] Kernel command line: console=ttyHSL0,115200,n8
> androidboot.hardware=qcom user_debug=31 androidboot.emmc=true
> androidboot.serialno=230b3a0f androidboot.baseband=msm
>
>    36    <6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192
> bytes)
>
>    37    <6>[    0.000000] Dentry cache hash table entries: 65536 (order:
> 6, 262144 bytes)
>
>    38    <6>[    0.000000] Inode-cache hash table entries: 32768 (order:
> 5, 131072 bytes)
>
>    39    <6>[    0.000000] Memory: 141MB 341MB 256MB = 738MB total
>
>    40    <5>[    0.000000] Memory: 702264k/702264k available, 228552k
> reserved, 330752K highmem
>
>    41    <5>[    0.000000] Virtual kernel memory layout:
>
>    42    <5>[    0.000000]    vector  : 0xffff0000 - 0xffff1000  (  4 kB)
>
>    43    <5>[    0.000000]    fixmap  : 0xfff00000 - 0xfffe0000  ( 896 kB)
>
>    44    <5>[    0.000000]    DMA    : 0xff000000 - 0xffe00000  (  14 MB)
>
>    45    <5>[    0.000000]    vmalloc : 0xda000000 - 0xfa000000  ( 512 MB)
>
>    46    <5>[    0.000000]    lowmem  : 0xc0000000 - 0xd9f00000  ( 415 MB)
>
>    47    <5>[    0.000000]    pkmap  : 0xbfe00000 - 0xc0000000  (  2 MB)
>
>    48    <5>[    0.000000]    modules : 0xbf000000 - 0xbfe00000  (  14 MB)
>
>    49    <5>[    0.000000]      .init : 0xc0008000 - 0xc0053000  ( 300 kB)
>
>    50    <5>[    0.000000]      .text : 0xc0100000 - 0xc0a78c98  (9700 kB)
>
>    51    <5>[    0.000000]      .data : 0xc0b00000 - 0xc0be9e78  ( 936 kB)
>
>    52    <5>[    0.000000]        .bss : 0xc0be9e9c - 0xc0dda190  (1985
> kB)
>
>    53    <6>[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3,
> MinObjects=0, CPUs=2, Nodes=1
>
>    54    <6>[    0.000000] Preemptible hierarchical RCU implementation.
>
>    55    <6>[    0.000000] NR_IRQS:817
>
>    56    <6>[    0.000000] sched_clock: 32 bits at 32kHz, resolution
> 30520ns, wraps every 131084001ms
>
>    57    <6>[    0.000000] Console: colour dummy device 80x30
>
>    58    <6>[    0.150160] Calibrating delay using timer specific
> routine.. 13.53 BogoMIPS (lpj=67673)
>
>    59    <6>[    0.150190] pid_max: default: 32768 minimum: 301
>
>    60    <6>[    0.150556] Mount-cache hash table entries: 512
>
>    61    <6>[    0.151564] Initializing cgroup subsys debug
>
>    62    <6>[    0.151594] Initializing cgroup subsys cpuacct
>
>    63    <6>[    0.151655] Initializing cgroup subsys freezer
>
>    64    <6>[    0.151716] CPU: Testing write buffer coherency: ok
>
>    65    <6>[    0.152021] hw perfevents: enabled with ARMv7 Krait PMU
> driver, 5 counters available
>
>    66    <6>[    0.260399] Brought up 2 CPUs
>
>    67    <6>[    0.260430] SMP: Total of 2 processors activated (27.06
> BogoMIPS).
>
>    68    <6>[    0.275995] print_constraints: dummy:
>
>    69    <3>[    0.276087] rdev_init_debugfs: Error-Bad Function Input
>
>    70    <6>[    0.276331] NET: Registered protocol family 16
>
>    71    <3>[    0.276514] AXI: msm_bus_fabric_init_driver():
> msm_bus_fabric_init_driver
>
>    72    <6>[    0.278040] meminfo_init: smem ram ptable found: ver: 0
> len: 5
>
>    73    <6>[    0.278071] Found 1 memory banks grouped into 8 memory
> regions
>
>    74    <4>[    0.278101] ------------[ cut here ]------------
>
>    75    <4>[    0.278132] WARNING: at
> /local/mnt2/workspace2/8960_file_enc_decr_2/kernel/drivers/thermal/msm8960_tsens.c:729
> msm_tsens_early_init+0x1e8/0x388()
>
>    76    <4>[    0.278132] tsens_calib_sensors8960: No temperature
> sensor:0 data for calibration in QFPROM!
>
>    77    <4>[    0.278162] Modules linked in:
>
>    78    <4>[    0.278193] [<c010c5d4>] (unwind_backtrace+0x0/0x12c) from
> [<c016ac5c>] (warn_slowpath_common+0x4c/0x64)
>
>    79    <4>[    0.278223] [<c016ac5c>] (warn_slowpath_common+0x4c/0x64)
> from [<c016acf4>] (warn_slowpath_fmt+0x2c/0x3c)
>
>    80    <4>[    0.278254] [<c016acf4>] (warn_slowpath_fmt+0x2c/0x3c)
> from [<c055319c>] (msm_tsens_early_init+0x1e8/0x388)
>
>    81    <4>[    0.278284] [<c055319c>]
> (msm_tsens_early_init+0x1e8/0x388) from [<c0014eac>]
> (msm8960_cdp_init+0x28/0x4f8)
>
>    82    <4>[    0.278345] [<c0014eac>] (msm8960_cdp_init+0x28/0x4f8)
> from [<c000b444>] (customize_machine+0x1c/0x28)
>
>    83    <4>[    0.278376] [<c000b444>] (customize_machine+0x1c/0x28)
> from [<c0100520>] (do_one_initcall+0x94/0x164)
>
>    84    <4>[    0.278406] [<c0100520>] (do_one_initcall+0x94/0x164) from
> [<c000834c>] (kernel_init+0x88/0x130)
>
>    85    <4>[    0.278437] [<c000834c>] (kernel_init+0x88/0x130) from
> [<c0106f60>] (kernel_thread_exit+0x0/0x8)
>
>    86    <4>[    0.278467] ---[ end trace da227214a82491b7 ]---
>
>    87    <6>[    0.278498] msm_rpm_init: RPM firmware 3.0.16842823
>
>    88    <6>[    0.297848] rcg_clk_handoff: sdc1_clk rate=48000000
>
>    89    <6>[    0.297909] rcg_clk_handoff: mdp_clk rate=200000000
>
>    90    <6>[    0.300289] saw_probe: id=0, name=8921_s5
>
>    91    <6>[    0.300686] saw_probe: id=1, name=8921_s6
>
>    92    <6>[    0.301022] gpio_vreg_probe: id=202, name=ext_5v,
> gpio=202, gpio_label=ext_5v_en
>
>    93    <6>[    0.301327] pm8921_probe: PMIC revision 1: F3
>
>    94    <6>[    0.301327] pm8921_probe: PMIC revision 2: 06
>
>    95    <6>[    0.301358] pm8921_probe: PMIC version: PM8921 rev 2.0
>
>    96    <6>[    0.301358] pm8921_probe: PMIC Restart Reason: Triggered
> from CHG (usb charger insertion)
>
>    97    <6>[    0.302914] pm_gpio_probe: OK: base=152, ngpio=44
>
>    98    <6>[    0.303219] pm8xxx_mpp_probe: OK: base=196, ngpio=12
>
>    99    <6>[    0.308011] gpio_vreg_probe: id=193, name=ext_otg_sw,
> gpio=193, gpio_label=ext_otg_sw_en
>
>  100    <6>[    0.319975] select_freq_plan: ACPU PVS: Slow
>
>  101    <6>[    0.320006] select_freq_plan: Max ACPU freq: 918000 KHz
>
>  102    <6>[    0.323454] cpufreq_table_init: CPU0: 11 scaling
> frequencies supported.
>
>  103    <6>[    0.323454] cpufreq_table_init: CPU1: 11 scaling
> frequencies supported.
>
>  104    <6>[    0.330474] sps:REVISION of BAM 0xda020000 is 0x5.
>
>  105    <6>[    0.331084] sps is ready.
>
>  106    <6>[    0.354646] bio: create slab <bio-0> at 0
>
>  107    <6>[    0.355318] ION heap vmalloc created
>
>  108    <6>[    0.355379] ION heap sf created at acf00000 with size
> 2800000
>
>  109    <6>[    0.355409] ION heap mm created at a5700000 with size
> 7800000
>
>  110    <6>[    0.355409] ION heap mm_fw created at a5500000 with size
> 200000
>
>  111    <6>[    0.355501] ION heap mfc created at af700000 with size 2000
>
>  112    <6>[    0.355501] ION heap iommu created
>
>  113    <6>[    0.355562] ION heap qsecom created at af702000 with size
> 100000
>
>  114    <6>[    0.355623] ION heap audio created at af802000 with size
> 2b4000
>
>  115    <5>[    0.356203] pm8xxx_pwm_probe: OK
>
>  116    <5>[    0.356630] SCSI subsystem initialized
>
>  117    <6>[    0.356752] sps:REVISION of BAM 0xda02c000 is 0x12.
>
>  118    <6>[    0.357759] usbcore: registered new interface driver usbfs
>
>  119    <6>[    0.357881] usbcore: registered new interface driver hub
>
>  120    <6>[    0.357973] usbcore: registered new device driver usb
>
>  121    <7>[    0.358522] Registered led device: led:battery_charging
>
>  122    <7>[    0.359255] Registered led device: led:battery_full
>
>  123    <6>[    0.359468] Advanced Linux Sound Architecture Driver
> Version 1.0.24.
>
>  124    <6>[    0.360018] Bluetooth: Core ver 2.16
>
>  125    <6>[    0.360079] NET: Registered protocol family 31
>
>  126    <6>[    0.360109] Bluetooth: HCI device and connection manager
> initialized
>
>  127    <6>[    0.360109] Bluetooth: HCI socket layer initialized
>
>  128    <6>[    0.360109] Bluetooth: L2CAP socket layer initialized
>
>  129    <6>[    0.360292] Bluetooth: SCO socket layer initialized
>
>  130    <6>[    0.360781] cfg80211: Calling CRDA to update world
> regulatory domain
>
>  131    <6>[    0.361025] Switching to clocksource gp_timer
>
>  132    <6>[    0.380283] NET: Registered protocol family 2
>
>  133    <6>[    0.380466] IP route cache hash table entries: 16384
> (order: 4, 65536 bytes)
>
>  134    <6>[    0.380924] TCP established hash table entries: 65536
> (order: 7, 524288 bytes)
>
>  135    <6>[    0.382084] TCP bind hash table entries: 65536 (order: 7,
> 786432 bytes)
>
>  136    <6>[    0.383549] TCP: Hash tables configured (established 65536
> bind 65536)
>
>  137    <6>[    0.383549] TCP reno registered
>
>  138    <6>[    0.383580] UDP hash table entries: 256 (order: 1, 8192
> bytes)
>
>  139    <6>[    0.383610] UDP-Lite hash table entries: 256 (order: 1,
> 8192 bytes)
>
>  140    <6>[    0.384129] NET: Registered protocol family 1
>
>  141    <6>[    0.384465] RPC: Registered named UNIX socket transport
> module.
>
>  142    <6>[    0.384495] RPC: Registered udp transport module.
>
>  143    <6>[    0.384495] RPC: Registered tcp transport module.
>
>  144    <6>[    0.384526] RPC: Registered tcp NFSv4.1 backchannel
> transport module.
>
>  145    <6>[    0.384709] Trying to unpack rootfs image as initramfs...
>
>  146    <6>[    0.397100] Freeing initrd memory: 164K
>
>  147    <6>[    0.397344] PMU: registered new PMU device of type 0
>
>  148    <6>[    0.397527] PMU: registered new PMU device of type 1
>
>  149    <6>[    0.399633] msm_ptm msm_ptm.0: PTM intialized.
>
>  150    <6>[    0.400732] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
>
>  151    <6>[    0.401770] pil_qdsp6v4 pil_qdsp6v4.1: using secure boot
>
>  152    <6>[    0.402777] pil_qdsp6v4 pil_qdsp6v4.2: using secure boot
>
>  153    <6>[    0.404028] pil_riva pil_riva: using secure boot
>
>  154    <3>[    0.405585] smd_channel_probe_worker: allocation table not
> initialized
>
>  155    <6>[    0.410987] msm_dsps driver version 3.02.
>
>  156    <6>[    0.411872] NET: Registered protocol family 27
>
>  157    <6>[    0.412452] dspcrashd_probe: Platform driver values: Base =
> 0x8da00000, Size = 0x1800000,pdata = 0xdeaddead
>
>  158    <6>[    0.413520] usf_init: USF SW version 1.1.1.
>
>  159    <6>[    0.413520] usf_init: Max 1 devs registration
>
>  160    <6>[    0.414649] modem_8960_init: modem fatal driver init'ed.
>
>  161    <6>[    0.414832] lpass_fatal_init: lpass SSR driver init'ed.
>
>  162    <6>[    0.414985] wcnss_8960: module initialized
>
>  163    <5>[    0.415351] msm_rpm_log_probe: OK
>
>  164    <4>[    0.596001] highmem bounce pool size: 64 pages
>
>  165    <6>[    0.596276] ashmem: initialized
>
>  166    <6>[    0.607294] fuse init (API version 7.16)
>
>  167    <6>[    0.607691] msgmni has been set to 725
>
>  168    <6>[    0.609369] Block layer SCSI generic (bsg) driver version
> 0.4 loaded (major 248)
>
>  169    <6>[    0.609369] io scheduler noop registered
>
>  170    <6>[    0.609400] io scheduler deadline registered
>
>  171    <6>[    0.609491] io scheduler cfq registered (default)
>
>  172    <6>[    0.613306] mipi_dsi base phy_addr = 0x4700000 virt =
> 0xda400000
>
>  173    <6>[    0.613337] mmss_sfpb  base phy_addr = 0x5700000,virt =
> 0xda056000
>
>  174    <4>[    0.613551] msm_fb_detect_panel: not supported
> 'mipi_video_toshiba_wvga'
>
>  175    <6>[    0.614008] setting pdata->panel_info.fb_num to 3. type: 8
>
>  176    <6>[    0.629909] FrameBuffer[0] 600x1024 size=7471104 bytes is
> registered successfully!
>
>  177    <7>[    0.630215] Registered led device: lcd-backlight
>
>  178    <4>[    0.630276] msm_fb_detect_panel: not supported
> 'mipi_video_novatek_qhd'
>
>  179    <4>[    0.630306] msm_fb_detect_panel: not supported
> 'mipi_cmd_novatek_qhd'
>
>  180    <4>[    0.630306] msm_fb_detect_panel: not supported
> 'mipi_video_renesas_fwvga'
>
>  181    <4>[    0.630337] msm_fb_detect_panel: not supported
> 'mipi_cmd_renesas_fwvga'
>
>  182    <4>[    0.630337] msm_fb_detect_panel: not supported
> 'mipi_video_chimei_wxga'
>
>  183    <4>[    0.630367] msm_fb_detect_panel: not supported
> 'mipi_video_truly_wvga'
>
>  184    <4>[    0.631100] hdmi_msm hdmi_msm.1: WARNING: HDCP disabled
>
>  185    <6>[    0.631191] setting pdata->panel_info.fb_num to 1. type: 7
>
>  186    <6>[    0.640347] FrameBuffer[1] 1920x1080 size=4149248 bytes is
> registered successfully!
>
>  187    <3>[    0.640622] hdmi_msm hdmi_msm.1:
> external_common_state_create: sysfs group d9148808
>
>  188    <6>[    0.640683] hdmi_msm hdmi_msm.1: HDMI HPD: ON
>
>  189    <3>[    0.751350] Video format is : 15
>
>  190    <6>[    0.751991] setting pdata->panel_info.fb_num to 1. type: 10
>
>  191    <3>[    0.752205] Inside writeback_driver_init
>
>  192    <3>[    0.752357] Inside writeback_probe
>
>  193    <3>[    0.752571] mdp_probe: writeback panel not supprted
>
>  194    <6>[    0.753517]
>
>  195    <6>[    0.753547]  msm_vidc_enc: Inside vid_enc_init()
>
>  196    <6>[    0.753731]
>
>  197    <6>[    0.753761]  msm_vidc_enc: Inside vid_enc_vcd_init()
>
>  198    <6>[    0.754188] msm_serial: driver initialized
>
>  199    <6>[    0.754402] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq
> = 188) is a MSM HS UART
>
>  200    <6>[    0.801495] msm_serial_hs module loaded
>
>  201    <6>[    0.801587] msm_serial_hsl: detected port #0
>
>  202    <6>[    0.801648] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16440000
> (irq = 186) is a MSM
>
>  203    <6>[    0.801709] msm_serial_hsl: console setup on port #0
>
>  204    <6>[    1.860613] console [ttyHSL0] enabled
>
>  205    <6>[    1.952205] msm_serial_hsl: driver initialized
>
>  206    <6>[    1.957057] msm_rotator: invalid HW version
>
>  207    <6>[    1.974881] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set
> for device is GPUMMU
>
>  208    <6>[    1.982023] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set
> for device is GPUMMU
>
>  209    <6>[    1.989043] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set
> for device is GPUMMU
>
>  210    <6>[    2.002594] brd: module loaded
>
>  211    <6>[    2.007904] loop: module loaded
>
>  212    <6>[    2.010163] pmem: Initializing pmem_audio (user-space) as
> non-cached
>
>  213    <6>[    2.016542] allocating 2834432 bytes at  (null) (afab6000
> physical) for pmem_audio
>
>  214    <4>[    2.024233] i2c-core: driver [isa1200] using legacy suspend
> method
>
>  215    <4>[    2.030154] i2c-core: driver [isa1200] using legacy resume
> method
>
>  216    <6>[    2.036746] tabla-slim tabla-slim: Initialized slim device
> tabla-slim
>
>  217    <6>[    2.137982] tabla2x-slim tabla2x-slim: Initialized slim
> device tabla2x-slim
>
>  218    <7>[    2.145673] gpio_request: gpio-185 (CDC_RESET) status -16
>
>  219    <3>[    2.145673] tabla_reset: Failed to request gpio 185
>
>  220    <3>[    2.149519] tabla_slim_probe: Resetting Tabla failed
>
>  221    <4>[    2.156722] tabla2x-slim: probe of tabla2x-slim failed with
> error -16
>
>  222    <6>[    2.163375] SCSI Media Changer driver v0.25
>
>  223    <6>[    2.167648] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic
> channels, max=256) (6 bit encapsulation enabled).
>
>  224    <6>[    2.176316] CSLIP: code copyright 1989 Regents of the
> University of California.
>
>  225    <6>[    2.184648] usbcore: registered new interface driver asix
>
>  226    <6>[    2.189073] usbcore: registered new interface driver
> cdc_ether
>
>  227    <6>[    2.194903] usbcore: registered new interface driver net1080
>
>  228    <6>[    2.200518] usbcore: registered new interface driver
> cdc_subset
>
>  229    <6>[    2.206439] usbcore: registered new interface driver zaurus
>
>  230    <6>[    2.211963] cdc_ncm: 04-Aug-2011
>
>  231    <6>[    2.215199] usbcore: registered new interface driver cdc_ncm
>
>  232    <6>[    2.220845] usbcore: registered new interface driver
> rmnet_usb
>
>  233    <6>[    2.227163] rmnet usb ctrl Initialized.
>
>  234    <6>[    2.230489] wcnss_wlan probed in built-in mode
>
>  235    <6>[    2.235251] rmnet_init: BAM devices[8]
>
>  236    <6>[    2.243125] msm_otg msm_otg: msm_otg probe
>
>  237    <6>[    2.246238] msm_otg msm_otg: OTG regs = da0b8000
>
>  238    <6>[    2.252800] ehci_hcd: USB 2.0 'Enhanced' Host Controller
> (EHCI) Driver
>
>  239    <6>[    2.258812] usbcore: registered new interface driver cdc_acm
>
>  240    <6>[    2.263970] cdc_acm: USB Abstract Control Model driver for
> USB modems and ISDN adapters
>
>  241    <6>[    2.271936] Initializing USB Mass Storage driver...
>
>  242    <6>[    2.276850] usbcore: registered new interface driver
> usb-storage
>
>  243    <6>[    2.282801] USB Mass Storage support registered.
>
>  244    <6>[    2.287440] usbcore: registered new interface driver
> ums-alauda
>
>  245    <6>[    2.293361] usbcore: registered new interface driver
> ums-cypress
>
>  246    <6>[    2.299313] usbcore: registered new interface driver
> ums-datafab
>
>  247    <6>[    2.305325] usbcore: registered new interface driver
> ums-freecom
>
>  248    <6>[    2.311307] usbcore: registered new interface driver
> ums-isd200
>
>  249    <6>[    2.317228] usbcore: registered new interface driver
> ums-jumpshot
>
>  250    <6>[    2.323302] usbcore: registered new interface driver
> ums-karma
>
>  251    <6>[    2.329101] usbcore: registered new interface driver
> ums-onetouch
>
>  252    <6>[    2.335205] usbcore: registered new interface driver
> ums-sddr09
>
>  253    <6>[    2.341065] usbcore: registered new interface driver
> ums-sddr55
>
>  254    <6>[    2.347016] usbcore: registered new interface driver
> ums-usbat
>
>  255    <6>[    2.352907] usbcore: registered new interface driver
> usbserial
>
>  256    <6>[    2.358553] usbserial: USB Serial Driver core
>
>  257    <6>[    2.362948] USB Serial support registered for Qualcomm USB
> modem
>
>  258    <6>[    2.368960] usbcore: registered new interface driver
> qcserial
>
>  259    <6>[    2.374698] usbcore: registered new interface driver
> usb_ehset_test
>
>  260    <6>[    2.380924] usbcore: registered new interface driver
> diag_bridge
>
>  261    <6>[    2.386967] usbcore: registered new interface driver
> mdm_bridge
>
>  262    <6>[    2.393651] msm_hsusb msm_hsusb: [usb_gadget_probe_driver]
> hw_ep_max = 32
>
>  263    <6>[    2.401556] android_usb gadget: Mass Storage Function,
> version: 2009/09/11
>
>  264    <6>[    2.407446] android_usb gadget: Number of LUNs=1
>
>  265    <6>[    2.411994]  lun0: LUN: removable file: (no medium)
>
>  266    <6>[    2.417060] android_usb gadget: android_usb ready
>
>  267    <6>[    2.421547] msm_otg msm_otg: phy_reset: success
>
>  268    <6>[    2.427620] diagchar initialized now
>
>  269    <6>[    2.430215] mousedev: PS/2 mouse device common for all mice
>
>  270    <6>[    2.436807] input: keypad_8960 as
> /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-keypad/input/input0
>
>  271    <6>[    2.445627] usbcore: registered new interface driver xpad
>
>  272    <6>[    2.450419] cyttsp_init:Cypress TrueTouch(R) Standard
> Product
>
>  273    <6>[    2.456126] cyttsp_init:I2C Touchscreen Driver (Built Feb
> 2 2012 @ 19:30:14)
>
>  274    <6>[    2.463268] cyttsp_probe:Start Probe 1.2
>
>  275    <6>[    2.467144] cyttsp_initialize:cyttsp-i2c: Register input
> device
>
>  276    <6>[    2.473248] input: cyttsp-i2c as
> /devices/i2c-3/3-0024/input/input1
>
>  277    <6>[    2.585319] cyttsp_power_on:BL101: f=01 s=11 err=D0 bl=010B
> bld=010B R=16
>
>  278    <6>[    2.591088] cyttsp_power_on:BL102: tver=14DC a_id=A009
> aver=0200
>
>  279    <6>[    2.597100] cyttsp_power_on:BL103: c_id=C0C1C2
>
>  280    <6>[    2.812726] cyttsp_power_on:BL104: f=04 s=00 err=00bl=0000
> bld=0000
>
>  281    <6>[    2.925011] cyttsp_power_on:SI102: tver=0000 a_id=0000
> aver=0000
>
>  282    <6>[    2.929955] cyttsp_power_on:SI103: c_id=000000
>
>  283    <6>[    3.061773] cyttsp_initialize:Setting up interrupt
>
>  284    <6>[    3.065710] cyttsp_initialize:cyttsp-i2c: Successful
> registration
>
>  285    <6>[    3.071600] cyttsp_probe:Start Probe PASS
>
>  286    <6>[    3.075965] input: pmic8xxx_pwrkey as
> /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/input/input2
>
>  287    <6>[    3.086677] using rtc device, pm8xxx_rtc, for alarms
>
>  288    <6>[    3.090462] rtc-pm8xxx rtc-pm8xxx: rtc core: registered
> pm8xxx_rtc as rtc0
>
>  289    <6>[    3.097787] i2c /dev entries driver
>
>  290    <6>[    3.101480] lirc_dev: IR Remote Control driver registered,
> major 237
>
>  291    <6>[    3.107401] IR NEC protocol handler initialized
>
>  292    <6>[    3.111918] IR RC5(x) protocol handler initialized
>
>  293    <6>[    3.116648] IR RC6 protocol handler initialized
>
>  294    <6>[    3.121165] IR JVC protocol handler initialized
>
>  295    <6>[    3.125713] IR Sony protocol handler initialized
>
>  296    <6>[    3.130291] IR RC5 (streamzap) protocol handler initialized
>
>  297    <6>[    3.135968] IR LIRC bridge handler initialized
>
>  298    <6>[    3.140302] Linux video capture interface: v2.00
>
>  299    <6>[    3.145032] usbcore: registered new interface driver
> uvcvideo
>
>  300    <6>[    3.150587] USB Video Class driver (v1.1.0)
>
>  301    <3>[    3.178788] qup_i2c qup_i2c.4: QUP: I2C status flags
> :0x1363c8, irq:185
>
>  302    <3>[    3.184373] qup_i2c qup_i2c.4: I2C slave addr:0x48 not
> connected
>
>  303    <4>[    3.192156] mt9m114: probe of 4-0048 failed with error -107
>
>  304    <6>[    3.211170] tsens_tm_init : TSENS early init not done.
>
>  305    <6>[    3.235006] pm8xxx_tm_probe: OK
>
>  306    <6>[    3.238211] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02)
> initialised: dm-devel@xxxxxxxxxx
>
>  307    <4>[    3.245627] dm_crypt_init: dm_crypt: entering
>
>  308    <6>[    3.250389] cpuidle: using governor ladder
>
>  309    <6>[    3.254143] cpuidle: using governor menu
>
>  310    <6>[    3.258415] mmc0: mci-version: 18
>
>  311    <6>[    3.261406] mmc0: bam physical base=0x12402000
>
>  312    <6>[    3.265771] mmc0: bam virtual base=0xda0cc000
>
>  313    <6>[    3.270105] mmc0: BAM device registered.
> bam_handle=0xd928c400
>
>  314    <6>[    3.275965] sps:REVISION of BAM 0xda0cc000 is 0x5.
>
>  315    <6>[    3.281275] mmc0: Qualcomm MSM SDCC-BAM at
> 0x0000000012402000 irq 130
>
>  316    <6>[    3.287166] mmc0: Qualcomm MSM SDCC-DML at
> 0x0000000012400800
>
>  317    <3>[    3.292904] mmc0: No card detect facilities available
>
>  318    <6>[    3.298153] mmc0: Qualcomm MSM SDCC-core at
> 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
>
>  319    <6>[    3.306271] mmc0: 8 bit data mode enabled
>
>  320    <6>[    3.310361] mmc0: 4 bit data mode disabled
>
>  321    <6>[    3.314298] mmc0: polling status mode disabled
>
>  322    <6>[    3.318693] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
>
>  323    <6>[    3.324492] mmc0: Slot eject status = 0
>
>  324    <6>[    3.328155] mmc0: Power save feature enable = 1
>
>  325    <6>[    3.332702] mmc0: SPS-BAM data transfer mode available
>
>  326    <6>[    3.337952] mmc1: mci-version: 18
>
>  327    <6>[    3.346253] mmc1: bam physical base=0x12182000
>
>  328    <6>[    3.355775] mmc1: bam virtual base=0xda0d8000
>
>  329    <6>[    3.361178] mmc1: BAM device registered.
> bam_handle=0xd928ca00
>
>  330    <6>[    3.371066] sps:REVISION of BAM 0xda0d8000 is 0x5.
>
>  331    <6>[    3.385716] mmc1: Qualcomm MSM SDCC-BAM at
> 0x0000000012182000 irq 128
>
>  332    <6>[    3.396184] mmc1: Qualcomm MSM SDCC-DML at
> 0x0000000012180800
>
>  333    <6>[    3.411597] mmc1: Qualcomm MSM SDCC-core at
> 0x0000000012180000 irq 134,657 dma -1 dmacrcri -1
>
>  334    <6>[    3.424172] mmc1: 8 bit data mode disabled
>
>  335    <6>[    3.432321] mmc1: 4 bit data mode enabled
>
>  336    <6>[    3.440347] mmc1: polling status mode disabled
>
>  337    <6>[    3.444864] mmc1: MMC clock 400000 -> 192000000 Hz, PCLK 0
> Hz
>
>  338    <6>[    3.451670] mmc1: Slot eject status = 0
>
>  339    <6>[    3.454509] mmc1: Power save feature enable = 1
>
>  340    <6>[    3.458965] mmc1: SPS-BAM data transfer mode available
>
>  341    <6>[    3.464672] usbcore: registered new interface driver usbhid
>
>  342    <6>[    3.469678] usbhid: USB HID core driver
>
>  343    <6>[    3.474011] logger: created 256K log 'log_main'
>
>  344    <6>[    3.478162] logger: created 256K log 'log_events'
>
>  345    <6>[    3.482923] logger: created 256K log 'log_radio'
>
>  346    <6>[    3.487440] logger: created 256K log 'log_system'
>
>  347    <6>[    3.492781] usbcore: registered new interface driver
> snd-usb-audio
>
>  348    <6>[    3.499587] msm_pcm_probe: dev name msm-voip-dsp
>
>  349    <6>[    3.505020] msm_pcm_probe: dev name msm-pcm-dsp
>
>  350    <6>[    3.510422] mmc0: new high speed MMC card at address 0001
>
>  351    <6>[    3.515458] msm_compr_probe: dev name msm-compr-dsp
>
>  352    <6>[    3.519853] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev
> name msm-pcm-lpa
>
>  353    <6>[    3.526415] mmcblk0: mmc0:0001 SEM16G 14.8 GiB
>
>  354    <6>[    3.531268] mmcblk0boot0: mmc0:0001 SEM16G partition 1 1.00
> MiB
>
>  355    <3>[    3.537250] msm_soc_platform_init
>
>  356    <6>[    3.540241] msm_afe_probe: dev name msm-pcm-afe
>
>  357    <6>[    3.544605] mmcblk0boot1: mmc0:0001 SEM16G partition 2 1.00
> MiB
>
>  358    <3>[    3.551686] msm_audio_init: Not the right machine type
>
>  359    <3>[    3.556386] msm_afe_afe_probe
>
>  360    <6>[    3.560903]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
> p12 p13 p14 p15 p16 p17 p18 p19 p20 p21
>
>  361    <6>[    3.575766]  mmcblk0boot1: unknown partition table
>
>  362    <6>[    3.578879] tabla_codec_probe : Tabla version reg 0x21
>
>  363    <6>[    3.578879] tabla_codec_probe : Tabla version 1
>
>  364    <6>[    3.591973]  mmcblk0boot0: unknown partition table
>
>  365    <6>[    3.610712] asoc: null-codec-dai <-> MultiMedia1 mapping ok
>
>  366    <6>[    3.633541] asoc: null-codec-dai <-> MultiMedia2 mapping ok
>
>  367    <6>[    3.664581] asoc: null-codec-dai <-> CS-VOICE mapping ok
>
>  368    <6>[    3.674988] asoc: null-codec-dai <-> VoIP mapping ok
>
>  369    <6>[    3.685365] asoc: null-codec-dai <-> MultiMedia3 mapping ok
>
>  370    <6>[    3.696230] asoc: null-codec-dai <-> SLIMBUS0_HOSTLESS
> mapping ok
>
>  371    <6>[    3.707431] asoc: null-codec-dai <-> INT_FM_HOSTLESS
> mapping ok
>
>  372    <3>[    3.718388] msm_asoc_pcm_new
>
>  373    <6>[    3.720219] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
>
>  374    <3>[    3.731878] msm_asoc_pcm_new
>
>  375    <6>[    3.733709] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
>
>  376    <6>[    3.745368] asoc: null-codec-dai <-> MultiMedia4 mapping ok
>
>  377    <6>[    3.755989] asoc: null-codec-dai <-> HDMI_HOSTLESS mapping
> ok
>
>  378    <4>[    3.839615] tabla_codec tabla_codec: ASoC: Failed to create
> Digital Mic1 debugfs file
>
>  379    <6>[    3.854265] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
>
>  380    <6>[    3.866534] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
>
>  381    <6>[    3.878864] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping
> ok
>
>  382    <6>[    3.891286] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping
> ok
>
>  383    <6>[    3.903769] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping
> ok
>
>  384    <6>[    3.916191] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping
> ok
>
>  385    <6>[    3.928643] asoc: msm-stub-rx <-> msm-dai-q6.8 mapping ok
>
>  386    <6>[    3.940729] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
>
>  387    <6>[    3.953029] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
>
>  388    <6>[    3.965267] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
>
>  389    <6>[    3.977384] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
>
>  390    <6>[    3.989470] asoc: msm-stub-rx <-> msm-dai-q6.32773 mapping
> ok
>
>  391    <6>[    4.001953] asoc: msm-stub-tx <-> msm-dai-q6.32772 mapping
> ok
>
>  392    <6>[    4.006897] mmc1: new high speed SDHC card at address e624
>
>  393    <6>[    4.012818] mmcblk1: mmc1:e624 SU08G 7.40 GiB
>
>  394    <6>[    4.014680] asoc: msm-stub-tx <-> msm-dai-q6.32771 mapping
> ok
>
>  395    <6>[    4.016908] input: msm8960-snd-card Button Jack as
> /devices/platform/soc-audio.0/sound/card0/input3
>
>  396    <6>[    4.017244] input: msm8960-snd-card Headset Jack as
> /devices/platform/soc-audio.0/sound/card0/input4
>
>  397    <6>[    4.019990] ALSA device list:
>
>  398    <6>[    4.020021]  #0: msm8960-snd-card
>
>  399    <6>[    4.020662] oprofile: using arm/armv7-krait
>
>  400    <6>[    4.020814] u32 classifier
>
>  401    <6>[    4.020845]    Actions configured
>
>  402    <6>[    4.020845] Netfilter messages via NETLINK v0.30.
>
>  403    <6>[    4.020906] nf_conntrack version 0.5.0 (10975 buckets,
> 43900 max)
>
>  404    <6>[    4.021699] ctnetlink v0.93: registering with nfnetlink.
>
>  405    <6>[    4.021822] NF_TPROXY: Transparent proxy support
> initialized, version 4.1.0
>
>  406    <6>[    4.021852] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT
> Ltd.
>
>  407    <6>[    4.022188] xt_time: kernel timezone is -0000
>
>  408    <6>[    4.022462] ip_tables: (C) 2000-2006 Netfilter Core Team
>
>  409    <6>[    4.022707] arp_tables: (C) 2002 David S. Miller
>
>  410    <6>[    4.022798] TCP cubic registered
>
>  411    <6>[    4.023622] NET: Registered protocol family 10
>
>  412    <6>[    4.025576] Mobile IPv6
>
>  413    <6>[    4.025637] ip6_tables: (C) 2000-2006 Netfilter Core Team
>
>  414    <6>[    4.025789] IPv6 over IPv4 tunneling driver
>
>  415    <6>[    4.026430] NET: Registered protocol family 17
>
>  416    <6>[    4.026583] Bluetooth: RFCOMM TTY layer initialized
>
>  417    <6>[    4.026583] Bluetooth: RFCOMM socket layer initialized
>
>  418    <6>[    4.026613] Bluetooth: RFCOMM ver 1.11
>
>  419    <6>[    4.026613] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>
>  420    <6>[    4.026613] Bluetooth: BNEP filters: protocol multicast
>
>  421    <6>[    4.026644] Bluetooth: HIDP (Human Interface Emulation) ver
> 1.2
>
>  422    <5>[    4.026766] Registering the dns_resolver key type
>
>  423    <6>[    4.026827] VFP support v0.3: implementor 51 architecture
> 64 part 4d variant 0 rev 0
>
>  424    <5>[    4.166641] Registering SWP/SWPB emulation handler
>
>  425    <6>[    4.172226]  mmcblk1: p1
>
>  426    <4>[    4.180283] ------------[ cut here ]------------
>
>  427    <4>[    4.183885] WARNING: at
> /local/mnt2/workspace2/8960_file_enc_decr_2/kernel/arch/arm/mach-msm/clock-local.c:392
> __branch_clk_disable_reg+0xe0/0xf8()
>
>  428    <4>[    4.197039] codec_i2s_spkr_bit_clk status stuck at 'on'
>
>  429    <4>[    4.202075] Modules linked in:
>
>  430    <4>[    4.205310] [<c010c5d4>] (unwind_backtrace+0x0/0x12c) from
> [<c016ac5c>] (warn_slowpath_common+0x4c/0x64)
>
>  431    <4>[    4.214771] [<c016ac5c>] (warn_slowpath_common+0x4c/0x64)
> from [<c016acf4>] (warn_slowpath_fmt+0x2c/0x3c)
>
>  432    <4>[    4.224324] [<c016acf4>] (warn_slowpath_fmt+0x2c/0x3c) from
> [<c014c070>] (__branch_clk_disable_reg+0xe0/0xf8)
>
>  433    <4>[    4.234213] [<c014c070>]
> (__branch_clk_disable_reg+0xe0/0xf8) from [<c014c0ac>]
> (cdiv_clk_disable+0x24/0x38)
>
>  434    <4>[    4.244010] [<c014c0ac>] (cdiv_clk_disable+0x24/0x38) from
> [<c000fc58>] (clock_late_init+0x7c/0xf4)
>
>  435    <4>[    4.253044] [<c000fc58>] (clock_late_init+0x7c/0xf4) from
> [<c0100520>] (do_one_initcall+0x94/0x164)
>
>  436    <4>[    4.262078] [<c0100520>] (do_one_initcall+0x94/0x164) from
> [<c000834c>] (kernel_init+0x88/0x130)
>
>  437    <4>[    4.270837] [<c000834c>] (kernel_init+0x88/0x130) from
> [<c0106f60>] (kernel_thread_exit+0x0/0x8)
>
>  438    <4>[    4.279597] ---[ end trace da227214a82491b8 ]---
>
>  439    <6>[    4.286006] clock_late_init() disabled 200 unused clocks
>
>  440    <6>[    4.300808] MSM Watchdog Initialized
>
>  441    <6>[    4.311826] rtc-pm8xxx rtc-pm8xxx: setting system clock to
> 1970-01-04 21:55:22 UTC (338122)
>
>  442    <4>[    4.320402] set_battery_data: invalid battery id, palladium
> 1500 assumed
>
>  443    <6>[    6.567099] pm8921_bms_probe: OK
> battery_capacity_at_boot=94 volt = 4116009 ocv = 4217214
>
>  444    <6>[    6.585899] Freeing init memory: 300K
>
>  445    <3>[    6.593987] init: /init.qcom.rc: 414: invalid command
> '/system/bin/log'
>
>  446    <4>[    6.600244] init (1): /proc/1/oom_adj is deprecated, please
> use /proc/1/oom_score_adj instead.
>
>  447    <3>[    6.781657] init: cannot open '/initlogo.rle'
>
>  448    <6>[    6.844742] EXT4-fs (mmcblk0p12): mounted filesystem with
> ordered data mode. Opts: barrier=1
>
>  449    <6>[    7.334503] EXT4-fs (mmcblk0p13): mounted filesystem with
> ordered data mode. Opts: noauto_da_alloc
>
>  450    <6>[    7.357576] EXT4-fs (mmcblk0p14): recovery complete
>
>  451    <6>[    7.362337] EXT4-fs (mmcblk0p14): mounted filesystem with
> ordered data mode. Opts: barrier=1
>
>  452    <6>[    7.387883] EXT4-fs (mmcblk0p15): recovery complete
>
>  453    <6>[    7.392736] EXT4-fs (mmcblk0p15): mounted filesystem with
> ordered data mode. Opts: barrier=1
>
>  454    <6>[    7.418159] EXT4-fs (mmcblk0p16): recovery complete
>
>  455    <6>[    7.423012] EXT4-fs (mmcblk0p16): mounted filesystem with
> ordered data mode. Opts: barrier=1
>
>  456    <4>[    7.587578] pm8xxx_irq_mask_ack: mask acking rouge irq=512
> pmirq=72
>
>  457    <3>[    7.967953] init: cannot find
> '/system/etc/install-recovery.sh', disabling 'flash_recovery'
>
>  458    <6>[    8.124553] Current firmware: 9.2.0
>
>  459    <6>[    8.126842] New firmware: 9.2.0
>
>  460    <6>[    8.130077] cyttspfw_flash_start: Firmware version
> lesser/equal to existing firmware, upgrade not needed
>
>  461    <6>[    8.246055] warning: `rild' uses 32-bit capabilities
> (legacy support in use)
>
>  462    <3>[    8.283534] android_usb: already disabled
>
>  463    <6>[    8.287257] adb_bind_config
>
>  464    <6>[    8.299038] frmnet_bind: RmNet(0) dual Speed, IN:ep7in
> OUT:ep5out
>
>  465    <6>[    8.310514] adb_open
>
>  466    <6>[    8.416938] android_work: did not send uevent (0 0  (null))
>
>  467    <6>[    8.489485] wcnss_wlan triggered by userspace
>
>  468    <6>[    8.574759] android_work: sent uevent USB_STATE=CONNECTED
>
>  469    <6>[    8.581382] android_work: sent uevent USB_STATE=DISCONNECTED
>
>  470    <6>[    8.774118] android_work: sent uevent USB_STATE=CONNECTED
>
>  471    <6>[    8.786571] android_usb gadget: high speed config #1:
> android
>
>  472    <6>[    8.791515] msm_otg msm_otg: Avail curr from USB = 500
>
>  473    <7>[    8.796642] diag: USB connected
>
>  474    <6>[    8.797314] android_work: sent uevent USB_STATE=CONFIGURED
>
>  475    <6>[    8.960231] platform pil_dsps.0: brought out of reset
>
>  476    <6>[    9.098794] pil_riva pil_riva: brought out of reset
>
>  477    <6>[    9.103219] alarm_set_rtc: Failed to set RTC, time will be
> lost on reboot
>
>  478    <6>[    9.136059] msm_thermal: enabled = 0
>
>  479    <6>[    9.534045] wcnss_wlan_ctrl_probe: SMD ctrl channel up
>
>  480    <6>[    9.700808] pil_qdsp6v4 pil_qdsp6v4.0: brought out of reset
>
>  481    <6>[    9.731542] apr_tal:Q6 Is Up
>
>  482    <3>[  10.563039] acdb_mmap: PMEM is not allocated, yet!
>
>  483    <6>[  10.670959] apr_tal: SMD_EVENT_OPEN
>
>  484    <6>[  11.339569] pil_qdsp6v4 pil_qdsp6v4.1: brought out of reset
>
>  485    <6>[  15.352846] pil_qdsp6v4 pil_qdsp6v4.2: brought out of reset
>
>  486    <3>[  15.357515] smd_pkt_open: DATA5_CNTL open failed -19
>
>  487    <3>[  15.866076] smd_pkt_open: DATA5_CNTL open failed -19
>
>  488    <3>[  16.373477] smd_pkt_open: DATA5_CNTL open failed -19
>
>  489    <3>[  16.416969] Notify: smsm init
>
>  490    <6>[  16.418953] _smem_log_init: no static log or log_idx
> allocated
>
>  491    <6>[  16.425331] _smem_log_init: no power log or log_idx allocated
>
>  492    <3>[  16.880726] smd_pkt_open: DATA5_CNTL open failed -19
>
>  493    <3>[  17.394597] smd_pkt_open: DATA5_CNTL open failed -19
>
>  494    <3>[  17.901815] smd_pkt_open: DATA5_CNTL open failed -19
>
>  495    <3>[  18.409156] smd_pkt_open: DATA5_CNTL open failed -19
>
>  496    <6>[  18.839493] apr_tal:Modem Is Up
>
>  497    <6>[  18.855486] sps:REVISION of BAM 0xda004000 is 0x5.
>
>  498    <3>[  18.917808] smd_pkt_open: DATA5_CNTL open failed -19
>
>  499    <3>[  19.425026] smd_pkt_open: DATA5_CNTL open failed -19
>
>  500    <6>[  19.543781] wcnss_post_bootup: Cancel APPS vote for Iris &
> Riva
>
>  501    <3>[  19.932244] smd_pkt_open: DATA5_CNTL open failed -19
>
>  502    <6>[  20.271936] request_suspend_state: wakeup (3->0) at
> 20278228597 (1970-01-05 00:49:40.168043275 UTC)
>
>  503    <3>[  20.440347] handle_bam_mux_cmd: dropping invalid LCID 10
> reserved 0 cmd 4 pad 0 ch 10 len 0
>
>  504    <3>[  20.449992] handle_bam_mux_cmd: dropping invalid LCID 11
> reserved 0 cmd 4 pad 0 ch 11 len 0
>
>  505    <6>[  20.956813] apr_tal: SMD_EVENT_OPEN
>
>  506    <6>[  20.976529] acc_open
>
>  507    <6>[  20.977689] acc_release
>
>  508    <3>[  21.234945] init: sys_prop: permission denied uid:1001
> name:ro.telephony.call_ring.multiple
>
>  509    <6>[  21.298245] Bluetooth: opening HCI-SMD channel
> :APPS_RIVA_BT_ACL
>
>  510    <6>[  21.303219] Bluetooth: opening HCI-SMD channel
> :APPS_RIVA_BT_CMD
>
>  511    <6>[  25.827071] msm_etb msm_etb.0: etb disabled
>
>  512    <6>[  25.830245] msm_tpiu msm_tpiu.0: tpiu disabled
>
>  513    <6>[  25.838425] msm_etb msm_etb.0: etb enabled
>
>  514    <6>[  25.841507] msm_funnel msm_funnel.0: funnel port mask 0x3
> enabled
>
>  515    <6>[  25.870471] msm_ptm msm_ptm.0: tracing enabled
>
>  516    <6>[  25.885792] msm_etb msm_etb.0: etb dumped
>
>  517    <6>[  25.900045] msm_etb msm_etb.0: etb disabled
>
>  518    <6>[  25.912162] msm_funnel msm_funnel.0: funnel port mask 0x3
> disabled
>
>  519    <6>[  25.928063] msm_ptm msm_ptm.0: tracing disabled
>
>  520    <3>[  456.144422] CPU1: msm_pm_power_collapse: failed to restore
> clock rate(0)
>
>  521    <5>[  456.144452] CPU1: platform_cpu_die: normal wakeup
>
>  522    <3>[  459.057836] CPU1: msm_pm_power_collapse: failed to restore
> clock rate(0)
>
>  523    <5>[  459.057866] CPU1: platform_cpu_die: normal wakeup
>
>  524    <3>[  461.635617] CPU1: msm_pm_power_collapse: failed to restore
> clock rate(0)
>
>  525    <5>[  461.635647] CPU1: platform_cpu_die: normal wakeup
>
>  526    <3>[  471.725286] CPU1: msm_pm_power_collapse: failed to restore
> clock rate(0)
>
>  527    <5>[  471.725316] CPU1: platform_cpu_die: normal wakeup
>
>  528    <3>[  475.743109] CPU1: msm_pm_power_collapse: failed to restore
> clock rate(0)
>
>  529    <5>[  475.743109] CPU1: platform_cpu_die: normal wakeup
>
>  530    <6>[  478.278956] process 873 (ndroid.systemui) no longer affine
> to cpu1
>
>  531    <7>[  478.345490] bluetoothd: unhandled page fault (11) at
> 0x00000014, code 0x017
>
>  532    <1>[  478.345521] pgd = d7c90000
>
>  533    <1>[  478.347199] [00000014] *pgd=9eef4831, *pte=00000000,
> *ppte=00000000
>
>  534    <4>[  478.353425]
>
>  535    <3>[  478.358278] init: untracked pid 1474 exited
>
>  536    <3>[  478.361513] init: untracked pid 1590 exited
>
>  537    <4>[  478.375370] Pid: 556, comm:          bluetoothd
>
>  538    <4>[  478.378971] CPU: 0    Tainted: G        W
> (3.0.8-00006-g7e7c91b-dirty #4)
>
>  539    <4>[  478.391301] PC is at 0x40205978
>
>  540    <4>[  478.393438] LR is at 0x4020595d
>
>  541    <4>[  478.401800] pc : [<40205978>]    lr : [<4020595d>]    psr:
> 20000030
>
>  542    <4>[  478.401800] sp : bed43ae0  ip : 400c9700  fp : 00336398
>
>  543    <4>[  478.425362] r10: 00000000  r9 : 401b737c  r8 : 0033a830
>
>  544    <4>[  478.429543] r7 : 000010f8  r6 : 4023599c  r5 : 4022b5b8  r4
> : 00000010
>
>  545    <4>[  478.443857] r3 : 4022b1ca  r2 : 00000001  r1 : 4022b1ca  r0
> : 00000001
>
>  546    <4>[  478.449351] Flags: nzCv  IRQs on  FIQs on  Mode USER_32
> ISA Thumb  Segment user
>
>  547    <4>[  478.470318] Control: 10c5787d  Table: 9ef9006a  DAC:
> 00000015
>
>  548    <3>[  478.490737] init: untracked pid 1457 exited
>
>  549    <3>[  478.649900] init: untracked pid 817 exited
>
>  550    <3>[  478.683961] init: untracked pid 1036 exited
>
>  551    <3>[  478.687196] init: untracked pid 1251 exited
>
>  552    <3>[  478.691347] init: untracked pid 1300 exited
>
>  553    <3>[  478.774973] init: untracked pid 406 exited
>
>  554    <3>[  478.778086] init: untracked pid 565 exited
>
>  555    <3>[  478.803967] init: untracked pid 629 exited
>
>  556    <3>[  478.813581] init: untracked pid 644 exited
>
>  557    <3>[  478.828292] CPU1: msm_pm_power_collapse: failed to restore
> clock rate(0)
>
>  558    <5>[  478.828322] CPU1: platform_cpu_die: normal wakeup
>
>  559    <3>[  478.828414] init: untracked pid 657 exited
>
>  560    <3>[  478.851213] init: untracked pid 670 exited
>
>  561    <3>[  478.855028] init: untracked pid 695 exited
>
>  562    <3>[  478.858538] init: untracked pid 732 exited
>
>  563    <3>[  478.862597] init: untracked pid 951 exited
>
>  564    <6>[  478.866534] msm_etb msm_etb.0: etb disabled
>
>  565    <3>[  478.867846] init: untracked pid 1236 exited
>
>  566    <3>[  478.867999] init: untracked pid 1269 exited
>
>  567    <3>[  478.868151] init: untracked pid 1316 exited
>
>  568    <3>[  478.868304] init: untracked pid 1329 exited
>
>  569    <3>[  478.868457] init: untracked pid 1348 exited
>
>  570    <3>[  478.868640] init: untracked pid 1361 exited
>
>  571    <3>[  478.868762] init: untracked pid 1377 exited
>
>  572    <3>[  478.868945] init: untracked pid 1394 exited
>
>  573    <3>[  478.869067] init: untracked pid 1411 exited
>
>  574    <3>[  478.869250] init: untracked pid 1427 exited
>
>  575    <3>[  478.869372] init: untracked pid 1435 exited
>
>  576    <3>[  478.869525] init: untracked pid 1541 exited
>
>  577    <3>[  478.869677] init: untracked pid 1567 exited
>
>  578    <6>[  478.926751] msm_tpiu msm_tpiu.0: tpiu disabled
>
>  579    <6>[  478.931786] msm_etb msm_etb.0: etb enabled
>
>  580    <6>[  478.935113] msm_funnel msm_funnel.0: funnel port mask 0x3
> enabled
>
>  581    <6>[  478.941522] msm_ptm msm_ptm.0: tracing enabled
>
>  582    <6>[  478.950434] msm_etb msm_etb.0: etb dumped
>
>  583    <6>[  478.953425] msm_etb msm_etb.0: etb disabled
>
>  584    <6>[  478.957668] msm_funnel msm_funnel.0: funnel port mask 0x3
> disabled
>
>  585    <6>[  478.964932] msm_ptm msm_ptm.0: tracing disabled
>
>  586    <6>[  479.044925] alarm_release: clear alarm, pending 0
>
>  587    <6>[  479.048618] alarm_release: clear alarm, pending 0
>
>  588    <6>[  479.053288] alarm_release: clear alarm, pending 0
>
>  589    <6>[  479.059301] alarm_release: clear alarm, pending 0
>
>  590    <4>[  481.274042] crypt_ctr: dm_crypt: entering
>
>  591    <4>[  481.277124] crypt_ctr_cipher: dm_crypt: entering
>
>  592    <4>[  481.281825] crypt_alloc_tfms: dm_crypt: entering
>
>  593    <4>[  481.373966] crypt_alloc_tfms: dm_crypt: entering
>
>  594    <4>[  481.377659] crypt_set_key: dm_crypt: entering
>
>  595    <4>[  481.382053] crypt_decode_key: dm_crypt: entering
>
>  596    <4>[  481.393102] crypt_setkey_allcpus: dm_crypt: entering
>
>  597    <4>[  481.414802] any_tfm: dm_crypt: entering
>
>  598    <4>[  481.417701] crypt_iv_essiv_ctr: dm_crypt: entering
>
>  599    <4>[  481.422554] setup_essiv_cpu: dm_crypt: entering
>
>  600    <4>[  481.453807] any_tfm: dm_crypt: entering
>
>  601    <4>[  481.456706] setup_essiv_cpu: dm_crypt: entering
>
>  602    <4>[  481.461284] any_tfm: dm_crypt: entering
>
>  603    <4>[  481.486860] crypt_iv_essiv_init: dm_crypt: entering
>
>  604    <4>[  481.490828] any_tfm: dm_crypt: entering
>
>  605    <4>[  481.513779] any_tfm: dm_crypt: entering
>
>  606    <4>[  481.524675] crypt_iterate_devices: dm_crypt: entering
>
>  607    <4>[  481.529009] crypt_iterate_devices: dm_crypt: entering
>
>  608    <4>[  481.543842] crypt_iterate_devices: dm_crypt: entering
>
>  609    <4>[  481.547993] crypt_preresume: dm_crypt: entering
>
>  610    <4>[  481.552571] crypt_resume: dm_crypt: entering
>
>  611    <3>[  482.296688] mdp4_overlay_pipe_alloc: ptype=1 FAILED
>
>  612    <3>[  482.300625] mdp4_overlay_req2pipe: pipe == NULL!
>
>  613    <3>[  482.305966] mdp4_overlay_set: mdp4_overlay_req2pipe, ret=-12
>
>  614    <3>[  482.311002] msmfb_overlay_set: ioctl failed, rc=-12
>
>  615    <3>[  482.362551] mdp4_overlay_pipe_alloc: ptype=1 FAILED
>
>  616    <3>[  482.366458] mdp4_overlay_req2pipe: pipe == NULL!
>
>  617    <3>[  482.371097] mdp4_overlay_set: mdp4_overlay_req2pipe, ret=-12
>
>  618    <3>[  482.377506] msmfb_overlay_set: ioctl failed, rc=-12
>
>  619    <3>[  482.413184] mdp4_overlay_pipe_alloc: ptype=1 FAILED
>
>  620    <3>[  482.417152] mdp4_overlay_req2pipe: pipe == NULL!
>
>  621    <3>[  482.421638] mdp4_overlay_set: mdp4_overlay_req2pipe, ret=-12
>
>  622    <3>[  482.427956] msmfb_overlay_set: ioctl failed, rc=-12
>
>  623    <3>[  482.497848] mdp4_overlay_pipe_alloc: ptype=1 FAILED
>
>  624    <3>[  482.501693] mdp4_overlay_req2pipe: pipe == NULL!
>
>  625    <3>[  482.506943] mdp4_overlay_set: mdp4_overlay_req2pipe, ret=-12
>
>  626    <3>[  482.512162] msmfb_overlay_set: ioctl failed, rc=-12
>
>  627    <3>[  482.581413] mdp4_overlay_pipe_alloc: ptype=1 FAILED
>
>  628    <3>[  482.585319] mdp4_overlay_req2pipe: pipe == NULL!
>
>  629    <3>[  482.589867] mdp4_overlay_set: mdp4_overlay_req2pipe, ret=-12
>
>  630    <3>[  482.596276] msmfb_overlay_set: ioctl failed, rc=-12
>
>  631    <3>[  482.664336] mdp4_overlay_pipe_alloc: ptype=1 FAILED
>
>  632    <3>[  482.668274] mdp4_overlay_req2pipe: pipe == NULL!
>
>  633    <3>[  482.672791] mdp4_overlay_set: mdp4_overlay_req2pipe, ret=-12
>
>  634    <3>[  482.679261] msmfb_overlay_set: ioctl failed, rc=-12
>
>  635    <3>[  482.748359] mdp4_overlay_pipe_alloc: ptype=1 FAILED
>
>  636    <3>[  482.752205] mdp4_overlay_req2pipe: pipe == NULL!
>
>  637    <3>[  482.757454] mdp4_overlay_set: mdp4_overlay_req2pipe, ret=-12
>
>  638    <3>[  482.762673] msmfb_overlay_set: ioctl failed, rc=-12
>
>  639    <3>[  482.831374] mdp4_overlay_pipe_alloc: ptype=1 FAILED
>
>  640    <3>[  482.835312] mdp4_overlay_req2pipe: pipe == NULL!
>
>  641    <3>[  482.839829] mdp4_overlay_set: mdp4_overlay_req2pipe, ret=-12
>
>  642    <3>[  482.846207] msmfb_overlay_set: ioctl failed, rc=-12
>
>  643    <3>[  482.914878] mdp4_overlay_pipe_alloc: ptype=1 FAILED
>
>  644    <3>[  482.918846] mdp4_overlay_req2pipe: pipe == NULL!
>
>  645    <3>[  482.923332] mdp4_overlay_set: mdp4_overlay_req2pipe, ret=-12
>
>  646    <3>[  482.929864] msmfb_overlay_set: ioctl failed, rc=-12
>
>  647    <3>[  482.998779] mdp4_overlay_pipe_alloc: ptype=1 FAILED
>
>  648    <3>[  483.002716] mdp4_overlay_req2pipe: pipe == NULL!
>
>  649    <3>[  483.007996] mdp4_overlay_set: mdp4_overlay_req2pipe, ret=-12
>
>  650    <3>[  483.013093] msmfb_overlay_set: ioctl failed, rc=-12
>
>  651    <3>[  483.081825] mdp4_overlay_pipe_alloc: ptype=1 FAILED
>
>  652    <3>[  483.085823] mdp4_overlay_req2pipe: pipe == NULL!
>
>  653    <3>[  483.090248] mdp4_overlay_set: mdp4_overlay_req2pipe, ret=-12
>
>  654    <3>[  483.096780] msmfb_overlay_set: ioctl failed, rc=-12
>
>  655    <3>[  483.165206] mdp4_overlay_pipe_alloc: ptype=1 FAILED
>
>  656    <3>[  483.169052] mdp4_overlay_req2pipe: pipe == NULL!
>
>  657    <3>[  483.174515] mdp4_overlay_set: mdp4_overlay_req2pipe, ret=-12
>
>  658    <3>[  483.179490] msmfb_overlay_set: ioctl failed, rc=-12
>
>  659    <3>[  483.248740] mdp4_overlay_pipe_alloc: ptype=1 FAILED
>
>  660    <3>[  483.252678] mdp4_overlay_req2pipe: pipe == NULL!
>
>  661    <3>[  483.258019] mdp4_overlay_set: mdp4_overlay_req2pipe, ret=-12
>
>  662    <3>[  483.263024] msmfb_overlay_set: ioctl failed, rc=-12
>
>  663    <3>[  483.332549] mdp4_overlay_pipe_alloc: ptype=1 FAILED
>
>  664    <3>[  483.336548] mdp4_overlay_req2pipe: pipe == NULL!
>
>  665    <3>[  483.341004] mdp4_overlay_set: mdp4_overlay_req2pipe, ret=-12
>
>  666    <3>[  483.347504] msmfb_overlay_set: ioctl failed, rc=-12
>
>  667    <3>[  483.415626] mdp4_overlay_pipe_alloc: ptype=1 FAILED
>
>  668    <3>[  483.419563] mdp4_overlay_req2pipe: pipe == NULL!
>
>  669    <3>[  483.424843] mdp4_overlay_set: mdp4_overlay_req2pipe, ret=-12
>
>  670    <3>[  483.429909] msmfb_overlay_set: ioctl failed, rc=-12
>
>  671    <4>[  483.475751] crypt_map: dm_crypt: entering
>
>  672    <4>[  483.492385] kcryptd_queue_crypt: dm_crypt: entering
>
>  673    <3>[  483.500473] mdp4_overlay_pipe_alloc: ptype=1 FAILED
>
>  674    <3>[  483.504501] mdp4_overlay_req2pipe: pipe == NULL!
>
>  675    <3>[  483.508927] mdp4_overlay_set: mdp4_overlay_req2pipe, ret=-12
>
>  676    <3>[  483.515397] msmfb_overlay_set: ioctl failed, rc=-12
>
>  677    <4>[  483.536914] kcryptd_crypt: dm_crypt: entering
>
>  678    <4>[  483.540332] kcryptd_crypt_write_convert: dm_crypt: entering
>
>  679    <4>[  483.546711] crypt_map: dm_crypt: entering
>
>  680    <4>[  483.562978] crypt_inc_pending: dm_crypt: entering
>
>  681    <4>[  483.573782] kcryptd_queue_crypt: dm_crypt: entering
>
>  682    <4>[  483.583213] crypt_alloc_buffer: dm_crypt: entering
>
>  683    <3>[  483.588463] mdp4_overlay_pipe_alloc: ptype=1 FAILED
>
>  684    <3>[  483.592430] mdp4_overlay_req2pipe: pipe == NULL!
>
>  685    <3>[  483.597832] mdp4_overlay_set: mdp4_overlay_req2pipe, ret=-12
>
>  686    <3>[  483.602746] msmfb_overlay_set: ioctl failed, rc=-12
>
>  687    <4>[  483.609766] crypt_map: dm_crypt: entering
>
>  688    <4>[  483.612849] kcryptd_queue_crypt: dm_crypt: entering
>
>
> ------------------------------
>
> _______________________________________________
> dm-crypt mailing list
> dm-crypt@xxxxxxxx
> http://www.saout.de/mailman/listinfo/dm-crypt
>
>
> End of dm-crypt Digest, Vol 32, Issue 8
> ***************************************
>
>
>
> _______________________________________________
> dm-crypt mailing list
> dm-crypt@xxxxxxxx
> http://www.saout.de/mailman/listinfo/dm-crypt
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.saout.de/pipermail/dm-crypt/attachments/20120209/d77debc9/attachment.html>

------------------------------

_______________________________________________
dm-crypt mailing list
dm-crypt@xxxxxxxx
http://www.saout.de/mailman/listinfo/dm-crypt


End of dm-crypt Digest, Vol 32, Issue 12
****************************************



_______________________________________________
dm-crypt mailing list
dm-crypt@xxxxxxxx
http://www.saout.de/mailman/listinfo/dm-crypt


root@android:/ # cat proc/crypto
cat proc/crypto
name         : cbc(aes)
driver       : qcrypto-cbc-aes
module       : kernel
priority     : 300
refcnt       : 1
selftest     : passed
type         : givcipher
async        : yes
blocksize    : 16
min keysize  : 16
max keysize  : 32
ivsize       : 16
geniv        : eseqiv

name         : ccm(aes)
driver       : qcrypto-aes-ccm
module       : qcrypto
priority     : 300
refcnt       : 1
selftest     : passed
type         : aead
async        : yes
blocksize    : 16
ivsize       : 16
maxauthsize  : 20
geniv        : <built-in>

name         : hmac(sha256)
driver       : qcrypto-hmac-sha256
module       : qcrypto
priority     : 300
refcnt       : 1
selftest     : passed
type         : ahash
async        : yes
blocksize    : 64
digestsize   : 32

name         : hmac(sha1)
driver       : qcrypto-hmac-sha1
module       : qcrypto
priority     : 300
refcnt       : 1
selftest     : passed
type         : ahash
async        : yes
blocksize    : 64
digestsize   : 20

name         : sha256
driver       : qcrypto-sha256
module       : qcrypto
priority     : 300
refcnt       : 1
selftest     : passed
type         : ahash
async        : yes
blocksize    : 64
digestsize   : 32

name         : sha1
driver       : qcrypto-sha1
module       : qcrypto
priority     : 300
refcnt       : 1
selftest     : passed
type         : ahash
async        : yes
blocksize    : 64
digestsize   : 20

name         : xts(aes)
driver       : qcrypto-xts-aes
module       : qcrypto
priority     : 300
refcnt       : 1
selftest     : passed
type         : ablkcipher
async        : yes
blocksize    : 16
min keysize  : 16
max keysize  : 32
ivsize       : 16
geniv        : <default>

name         : cbc(des3_ede)
driver       : qcrypto-cbc-3des
module       : qcrypto
priority     : 300
refcnt       : 1
selftest     : passed
type         : ablkcipher
async        : yes
blocksize    : 8
min keysize  : 24
max keysize  : 24
ivsize       : 8
geniv        : <default>

name         : ecb(des3_ede)
driver       : qcrypto-ecb-3des
module       : qcrypto
priority     : 300
refcnt       : 1
selftest     : passed
type         : ablkcipher
async        : yes
blocksize    : 8
min keysize  : 24
max keysize  : 24
ivsize       : 0
geniv        : <default>

name         : cbc(des)
driver       : qcrypto-cbc-des
module       : qcrypto
priority     : 300
refcnt       : 1
selftest     : passed
type         : ablkcipher
async        : yes
blocksize    : 8
min keysize  : 8
max keysize  : 8
ivsize       : 8
geniv        : <default>

name         : ecb(des)
driver       : qcrypto-ecb-des
module       : qcrypto
priority     : 300
refcnt       : 1
selftest     : passed
type         : ablkcipher
async        : yes
blocksize    : 8
min keysize  : 8
max keysize  : 8
ivsize       : 0
geniv        : <default>

name         : ctr(aes)
driver       : qcrypto-ctr-aes
module       : qcrypto
priority     : 300
refcnt       : 1
selftest     : passed
type         : ablkcipher
async        : yes
blocksize    : 16
min keysize  : 16
max keysize  : 32
ivsize       : 16
geniv        : <default>

name         : cbc(aes)
driver       : qcrypto-cbc-aes
module       : qcrypto
priority     : 300
refcnt       : 1
selftest     : passed
type         : ablkcipher
async        : yes
blocksize    : 16
min keysize  : 16
max keysize  : 32
ivsize       : 16
geniv        : <default>

name         : ecb(aes)
driver       : qcrypto-ecb-aes
module       : qcrypto
priority     : 300
refcnt       : 1
selftest     : passed
type         : ablkcipher
async        : yes
blocksize    : 16
min keysize  : 16
max keysize  : 32
ivsize       : 0
geniv        : <default>

name         : ecb(aes)
driver       : ecb(aes-generic)
module       : kernel
priority     : 100
refcnt       : 2
selftest     : passed
type         : blkcipher
blocksize    : 16
min keysize  : 16
max keysize  : 32
ivsize       : 0
geniv        : <default>

name         : stdrng
driver       : krng
module       : kernel
priority     : 200
refcnt       : 2
selftest     : passed
type         : rng
seedsize     : 0

name         : crc32c
driver       : crc32c-generic
module       : kernel
priority     : 100
refcnt       : 2
selftest     : passed
type         : shash
blocksize    : 1
digestsize   : 4

name         : deflate
driver       : deflate-generic
module       : kernel
priority     : 0
refcnt       : 1
selftest     : passed
type         : compression

name         : arc4
driver       : arc4-generic
module       : kernel
priority     : 0
refcnt       : 1
selftest     : passed
type         : cipher
blocksize    : 1
min keysize  : 1
max keysize  : 256

name         : aes
driver       : aes-generic
module       : kernel
priority     : 100
refcnt       : 2
selftest     : passed
type         : cipher
blocksize    : 16
min keysize  : 16
max keysize  : 32

name         : twofish
driver       : twofish-generic
module       : kernel
priority     : 100
refcnt       : 1
selftest     : passed
type         : cipher
blocksize    : 16
min keysize  : 16
max keysize  : 32

name         : des3_ede
driver       : des3_ede-generic
module       : kernel
priority     : 0
refcnt       : 1
selftest     : passed
type         : cipher
blocksize    : 8
min keysize  : 24
max keysize  : 24

name         : des
driver       : des-generic
module       : kernel
priority     : 0
refcnt       : 1
selftest     : passed
type         : cipher
blocksize    : 8
min keysize  : 8
max keysize  : 8

name         : sha256
driver       : sha256-generic
module       : kernel
priority     : 0
refcnt       : 1
selftest     : passed
type         : shash
blocksize    : 64
digestsize   : 32

name         : sha224
driver       : sha224-generic
module       : kernel
priority     : 0
refcnt       : 1
selftest     : passed
type         : shash
blocksize    : 64
digestsize   : 28

name         : sha1
driver       : sha1-generic
module       : kernel
priority     : 0
refcnt       : 1
selftest     : passed
type         : shash
blocksize    : 64
digestsize   : 20

name         : md5
driver       : md5-generic
module       : kernel
priority     : 0
refcnt       : 1
selftest     : passed
type         : shash
blocksize    : 64
digestsize   : 16

name         : md4
driver       : md4-generic
module       : kernel
priority     : 0
refcnt       : 1
selftest     : passed
type         : shash
blocksize    : 64
digestsize   : 16
_______________________________________________
dm-crypt mailing list
dm-crypt@xxxxxxxx
http://www.saout.de/mailman/listinfo/dm-crypt

[Index of Archives]     [Device Mapper Devel]     [Fedora Desktop]     [ATA RAID]     [Fedora Marketing]     [Fedora Packaging]     [Fedora SELinux]     [Yosemite News]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux