Am Wed, 14 Oct 2015 13:51:56 +0100
schrieb Zubair Lutfullah Kakakhel <Zubair.Kakakhel@xxxxxxxxxx>:
> The xilfpga platform will be DT only.
>
> Add required platform code. DT files have already been added separately
>
> [...]
>
> diff --git a/arch/mips/include/asm/mach-xilfpga/gpio.h b/arch/mips/include/asm/mach-xilfpga/gpio.h
> new file mode 100644
> index 0000000..26778fc
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-xilfpga/gpio.h
> @@ -0,0 +1,19 @@
> +/*
> + * Copyright (C) 2015 Imagination Technologies
> + * Author: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@xxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#ifndef __ASM_MACH_XILFPGA_GPIO_H
> +#define __ASM_MACH_XILFPGA_GPIO_H
> +
> +#include <asm-generic/gpio.h>
> +
> +#define gpio_get_value __gpio_get_value
> +#define gpio_set_value __gpio_set_value
> +
> +#endif /* __ASM_MACH_XILFPGA_GPIO_H */
Custom gpio.h has been disabled, this file won't be used, it can just
be dropped.
> diff --git a/arch/mips/include/asm/mach-xilfpga/irq.h b/arch/mips/include/asm/mach-xilfpga/irq.h
> new file mode 100644
> index 0000000..0132a5b9
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-xilfpga/irq.h
> @@ -0,0 +1,18 @@
> +/*
> + * Copyright (C) 2015 Imagination Technologies
> + * Author: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@xxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#ifndef __MIPS_ASM_MACH_XILFPGA_IRQ_H__
> +#define __MIPS_ASM_MACH_XILFPGA_IRQ_H__
> +
> +#define NR_IRQS 32
> +
> +#include_next <irq.h>
> +
> +#endif /* __MIPS_ASM_MACH_XILFPGA_IRQ_H__ */
Is this really needed? If not I would not add it to keep the maintenance
burden down.
> [...]
>
> diff --git a/arch/mips/xilfpga/time.c b/arch/mips/xilfpga/time.c
> new file mode 100644
> index 0000000..3f2e39e
> --- /dev/null
> +++ b/arch/mips/xilfpga/time.c
> @@ -0,0 +1,41 @@
> +/*
> + * Xilfpga clocksource/timer setup
> + *
> + * Copyright (C) 2015 Imagination Technologies
> + * Author: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@xxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/clocksource.h>
> +#include <linux/of.h>
> +
> +#include <asm/time.h>
> +
> +void __init plat_time_init(void)
> +{
> + struct device_node *np;
> + struct clk *clk = 0;
> +
> + of_clk_init(NULL);
> + clocksource_of_init();
> +
> + np = of_get_cpu_node(0, NULL);
> + if (!np) {
> + pr_err("Failed to get CPU node\n");
> + return;
> + }
> +
> + clk = of_clk_get(np, 0);
> + if (IS_ERR(clk)) {
> + pr_err("Failed to get CPU clock: %ld\n", PTR_ERR(clk));
> + return;
> + }
> +
> + mips_hpt_frequency = clk_get_rate(clk) / 2;
> + clk_put(clk);
> +}
I wanted to use something similar on ATH79 once all boards moved to DT.
On the other hand I saw that BMIPS use a dedicated property on the CPU
node to represent the HPT frequency. If possible it would make sense to
use a common scheme for all MIPS platforms. However I personally don't
know enough about MIPS in general to judge this.
On the other hand I think it might make more sense to have a dedicated
node in DT to represent the HPT timer instead of hacking on the CPU
node. That would also fit better if the HPT code ever become is a real
driver.
Alban
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
