This patch marks all the reference to the legacy wakeup bindings
and replaces them with the standard "wakeup-source" property.
All these legacy property are also listed under a separate section in
the generic wakeup-source binding document.
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Pawel Moll <pawel.moll@xxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
Signed-off-by: Sudeep Holla <sudeep.holla@xxxxxxx>
---
Documentation/devicetree/bindings/crypto/fsl-sec4.txt | 4 ++--
Documentation/devicetree/bindings/input/ads7846.txt | 3 ++-
Documentation/devicetree/bindings/input/gpio-keys-polled.txt | 1 +
Documentation/devicetree/bindings/input/gpio-keys.txt | 1 +
Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt | 1 +
Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt | 3 ++-
Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt | 1 +
Documentation/devicetree/bindings/input/samsung-keypad.txt | 3 ++-
Documentation/devicetree/bindings/mfd/tc3589x.txt | 1 +
Documentation/devicetree/bindings/mmc/mmc.txt | 5 +++--
Documentation/devicetree/bindings/rtc/isil,isl12057.txt | 10 +++++-----
Documentation/devicetree/bindings/rtc/rtc-opal.txt | 5 +++--
12 files changed, 24 insertions(+), 14 deletions(-)
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
index 6831d025ec24..adeca34c5a33 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
@@ -441,7 +441,7 @@ System ON/OFF key driver
regmap = <&snvs>;
interrupts = <0 4 0x4>
linux,keycode = <116>; /* KEY_POWER */
- wakeup;
+ wakeup-source;
};
=====================================================================
@@ -530,7 +530,7 @@ FULL EXAMPLE
regmap = <&sec_mon>;
interrupts = <0 4 0x4>;
linux,keycode = <116>; /* KEY_POWER */
- wakeup;
+ wakeup-source;
};
};
diff --git a/Documentation/devicetree/bindings/input/ads7846.txt b/Documentation/devicetree/bindings/input/ads7846.txt
index df8b1279491d..33a1638b61d6 100644
--- a/Documentation/devicetree/bindings/input/ads7846.txt
+++ b/Documentation/devicetree/bindings/input/ads7846.txt
@@ -65,6 +65,7 @@ must be specified.
pendown-gpio GPIO handle describing the pin the !PENIRQ
line is connected to.
wakeup-source use any event on touchscreen as wakeup event.
+ (Legacy property support: "linux,wakeup")
Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC::
@@ -86,6 +87,6 @@ must be specified.
ti,x-plate-ohms = /bits/ 16 <40>;
ti,pressure-max = /bits/ 16 <255>;
- linux,wakeup;
+ wakeup-source;
};
};
diff --git a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
index 5b91f5a3bd5c..d698475a9262 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
+++ b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
@@ -21,6 +21,7 @@ Device-Tree bindings for input/gpio_keys_polled.c keyboard driver
- debounce-interval: Debouncing interval time in milliseconds.
If not specified defaults to 5.
- wakeup-source: Boolean, button can wake-up the system.
+ (Legacy property supported: "gpio-key,wakeup")
Example nodes:
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt
index 072bf7573c37..cf1333d1dd52 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys.txt
+++ b/Documentation/devicetree/bindings/input/gpio-keys.txt
@@ -24,6 +24,7 @@ both at the same time. Specifying both properties is allowed.
- debounce-interval: Debouncing interval time in milliseconds.
If not specified defaults to 5.
- wakeup-source: Boolean, button can wake-up the system.
+ (Legacy property supported: "gpio-key,wakeup")
- linux,can-disable: Boolean, indicates that button is connected
to dedicated (not shared) interrupt which can be disabled to
suppress events from the button.
diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
index 4d86059c370c..d0ea09ba249f 100644
--- a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
+++ b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
@@ -20,6 +20,7 @@ report the event using GPIO interrupts to the cpu.
Optional Properties:
- linux,no-autorepeat: do no enable autorepeat feature.
- wakeup-source: use any event on keypad as wakeup event.
+ (Legacy property supported: "linux,wakeup")
- debounce-delay-ms: debounce interval in milliseconds
- col-scan-delay-us: delay, measured in microseconds, that is needed
before we can scan keypad after activating column gpio
diff --git a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
index 0382b8bd69c6..1faa7292e21f 100644
--- a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
+++ b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
@@ -29,7 +29,8 @@ Optional properties, in addition to those specified by the shared
- nvidia,debounce-delay-ms: delay in milliseconds per row scan for debouncing
- nvidia,repeat-delay-ms: delay in milliseconds before repeat starts
- nvidia,ghost-filter: enable ghost filtering for this device
-- nvidia,wakeup-source: configure keyboard as a wakeup source for suspend/resume
+- wakeup-source: configure keyboard as a wakeup source for suspend/resume
+ (Legacy property supported: "nvidia,wakeup-source")
Example:
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
index ee6215681182..4a9dc6ba96b1 100644
--- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
+++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
@@ -37,6 +37,7 @@ PROPERTIES
Usage: optional
Value type: <bool>
Definition: use any event on keypad as wakeup event.
+ (Legacy property supported: "linux,keypad-wakeup")
- keypad,num-rows:
Usage: required
diff --git a/Documentation/devicetree/bindings/input/samsung-keypad.txt b/Documentation/devicetree/bindings/input/samsung-keypad.txt
index 863e77f619dc..5305e74e5742 100644
--- a/Documentation/devicetree/bindings/input/samsung-keypad.txt
+++ b/Documentation/devicetree/bindings/input/samsung-keypad.txt
@@ -38,6 +38,7 @@ event using a interrupt to the cpu.
Optional Properties:
- wakeup-source: use any event on keypad as wakeup event.
+ (Legacy property supported: "linux,input-wakeup")
Optional Properties specific to linux:
- linux,keypad-no-autorepeat: do no enable autorepeat feature.
@@ -51,7 +52,7 @@ event using a interrupt to the cpu.
samsung,keypad-num-rows = <2>;
samsung,keypad-num-columns = <8>;
linux,input-no-autorepeat;
- linux,input-wakeup;
+ wakeup-source;
pinctrl-names = "default";
pinctrl-0 = <&keypad_rows &keypad_columns>;
diff --git a/Documentation/devicetree/bindings/mfd/tc3589x.txt b/Documentation/devicetree/bindings/mfd/tc3589x.txt
index 37bf7f1aa70a..23fc2f21f5a4 100644
--- a/Documentation/devicetree/bindings/mfd/tc3589x.txt
+++ b/Documentation/devicetree/bindings/mfd/tc3589x.txt
@@ -56,6 +56,7 @@ following built-in devices: gpio, keypad, rotator (vibrator), PWM (for
bindings/input/matrix-keymap.txt
- linux,no-autorepeat: do no enable autorepeat feature.
- wakeup-source: use any event on keypad as wakeup event.
+ (Legacy property supported: "linux,wakeup")
Example:
diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index 0384fc3f64e8..a88f5dc775bd 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -67,7 +67,8 @@ polarity is in effect.
Optional SDIO properties:
- keep-power-in-suspend: Preserves card power during a suspend/resume cycle
-- enable-sdio-wakeup: Enables wake up of host system on SDIO IRQ assertion
+- wakeup-source: Enables wake up of host system on SDIO IRQ assertion
+ (Legacy property supported: "enable-sdio-wakeup")
MMC power sequences:
@@ -117,7 +118,7 @@ sdhci@ab000000 {
wp-gpios = <&gpio 70 0>;
max-frequency = <50000000>;
keep-power-in-suspend;
- enable-sdio-wakeup;
+ wakeup-source;
mmc-pwrseq = <&sdhci0_pwrseq>
}
diff --git a/Documentation/devicetree/bindings/rtc/isil,isl12057.txt b/Documentation/devicetree/bindings/rtc/isil,isl12057.txt
index 501c39ceae79..cf83e0940302 100644
--- a/Documentation/devicetree/bindings/rtc/isil,isl12057.txt
+++ b/Documentation/devicetree/bindings/rtc/isil,isl12057.txt
@@ -5,7 +5,7 @@ consisting of a compatible field, an address and possibly an interrupt
line).
Nonetheless, it also supports an option boolean property
-("isil,irq2-can-wakeup-machine") to handle the specific use-case found
+("wakeup-source") to handle the specific use-case found
on at least three in-tree users of the chip (NETGEAR ReadyNAS 102, 104
and 2120 ARM-based NAS); On those devices, the IRQ#2 pin of the chip
(associated with the alarm supported by the driver) is not connected
@@ -22,9 +22,9 @@ can wake up the device.
Optional properties:
- - "isil,irq2-can-wakeup-machine": mark the chip as a wakeup source,
- independently of the availability of an IRQ line connected to the
- SoC.
+ - "wakeup-source": mark the chip as a wakeup source, independently of
+ the availability of an IRQ line connected to the SoC.
+ (Legacy property supported: "isil,irq2-can-wakeup-machine")
- "interrupt-parent", "interrupts": for passing the interrupt line
of the SoC connected to IRQ#2 of the RTC chip.
@@ -74,5 +74,5 @@ Example isl12057 node without IRQ#2 pin connected to the SoC but to a
isl12057: isl12057@68 {
compatible = "isil,isl12057";
reg = <0x68>;
- isil,irq2-can-wakeup-machine;
+ wakeup-source;
};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-opal.txt b/Documentation/devicetree/bindings/rtc/rtc-opal.txt
index af87e5ecac54..a1734e5cb75b 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-opal.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-opal.txt
@@ -5,12 +5,13 @@ IBM OPAL real-time clock
- comapatible: Should be "ibm,opal-rtc"
Optional properties:
-- has-tpo: Decides if the wakeup is supported or not.
+- wakeup-source: Decides if the wakeup is supported or not
+ (Legacy property supported: "has-tpo")
Example:
rtc {
compatible = "ibm,opal-rtc";
- has-tpo;
+ wakeup-source;
phandle = <0x10000029>;
linux,phandle = <0x10000029>;
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
